• 한국환경과학회지
• /
• 제24권10호
• /
• pp.1239-1251
• /
• 2015

Impervious areas have been expanded by urbanization and the natural structure of water circulation has been destroyed. The limits of centralized management for controlling storm water runoff in urban areas have been suggested. Low impact development (LID) technologies have been promoted as a crucial alternative, establishing a connection with city development plans to build green infrastructures in environmentally friendly cities. Thus, the improvement of water circulation and the control of nonpoint source were simulated through XP-SWMM (storm water and wastewater management model for experts) in this study. The application of multiple LID combination practices with permeable pavements, bioretention cells, and gutter filters were observed as reducing the highest runoff volume by up to 70%. The results from four different LID installation scenarios indicated that permeable paving is the most effective method for reducing storm water runoff. The rate of storm water runoff volume reduced as the rainfall duration extended. Based on the simulation results, each LID facility was designed and constructed in the target area. The LID practices in an urban area enable future studies of the analysis of the criteria, suitable capacity, and cost-efficiency, and proper management methods of various LID techniques.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.393-400
• /
• 2017

One of the big problems facing municipalities is the management and control of urban flooding where urban drainage systems are under growing pressure due to increases in urbanization, population and changes in the climate. Urban flooding causes environmental and infrastructure damage, especially to roads, this damage increasing maintenance costs. The aim of the present study is to develop a decision support tool to identify the performance of storm networks to address future risks associated with climate change in the Middle East region and specifically, illegal sewer connections in the storm networks of Karbala city, Iraq. The storm water management model has been used to simulate Karbala's storm drainage network using continuous hourly rainfall intensity data from 2008 to 2016. The results indicate that the system is sufficient as designed before consideration of extra sewage due to an illegal sewer connection. Due to climate changes in recent years, rainfall intensity has increased reaching 33.54 mm/h, this change led to flooding in 47% of manholes. Illegal sewage will increase flooding in the storm system at this rainfall intensity from between 39% to 52%.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.346-352
• /
• 2017

This study discusses application of the storm water management model (SWMM) to designing the sponge city facilities in the Athletes Village of Military World Games in Wuhan in October 2019. The SWMM was used to simulate the runoff processes and reduction efficiencies of the sponge city facilities. The runoffs of the sponge city facilities were compared with those of traditional drainage system for the design rainfall of 35.2mm and the rainfalls with different recurrence periods. The results show that the hign density sponge city facilities could meet the requirements for 80% of annual runoff control rate, SWMM can determine the scales of the sponge city facilities and effectively simulate the hydrological processes for different layout schemes. The simulation model is also helpful to making optimization of the sponge city facility layout.

• 한국물환경학회지
• /
• 제33권5호
• /
• pp.531-537
• /
• 2017

The biologic Oxygen Demand (BOD) is a reliable and generally accepted indicator of water pollution by organic pollutants. Accordingly, estimation of BOD export from paddies carries important implications fwith regard to water management in rural areas. In this study, hydrology and BOD concentration were monitored during the period 2008 through 2012, in an effort to understand the characteristics of BOD export from paddy fields. The findings demonstrated that BOD load by rainfall above 50 mm. occupied about 50 % of total load, whereas the load by less than ten mm. rainfall occupied about 29 % of the total load during periods of stormy activity. It therefore seems that it could be possible to reduce the BOD load up to 29 % during storm periods, when drainage control conducted for rainfall less than ten mm.(an amount which is relatively easy to manage). The documented mean loads of storm and non-storm were $17.1kg\;ha^{-1}\;yr^{-1}$ and $11.2kg\;ha^{-1}\;yr^{-1}$, respectively. The BOD load during the significant rainfall period was similar to the renewed unit load by NIER (2014). However, there were substantial differences between unit load and actual load when the non-storm load was incorporated into the BOD load estimation from paddy fields. In view of the foregoing, it is felt that, the non-storm load needs to be further considered and managed for the successful implementation of Total Maximum Daily Load (TMDL) program.

• 한국물환경학회지
• /
• 제29권6호
• /
• pp.754-761
• /
• 2013

Urban floods are usually caused by the lack of drainage capacity. Hence, sewer capacity expansion methodology by replacing small pipes with bigger ones is primarily applied as a flood control measure. However, this approach is often unreasonable because of the costs and time involved. Thus, the installation of underground rainwater storage tanks with the two advantages of flood control and water conservation is proposed. This study compared the effectiveness of flood control by both the sewer expansion methodology and rainwater storage tanks using the Storm Water Management Model. Three cases were simulated in this study. The first case analyzed flood reduction by the storm sewer expansion methodology. The simulation results indicate that the overflow volume from manholes was reduced by 49% with this methodology. The second case analyzed flood reduction by installation of rainwater storage tanks. The simulation results indicate that the overflow volume was reduced by 62%. However, these two cases could not prevent urban floods completely. Hence, the third case analyzed the joint application of the storm sewer expansion methodology and rainwater storage tanks. In this simulation, flooding did not occur. Consequently, the results of this study clearly show that underground rainwater storage tanks are more effective for flood control than capacity expansion of storm sewer. Furthermore, the joint application of these two flood control measures is more effective than their separate application.

• Environmental Engineering Research
• /
• 제10권6호
• /
• pp.316-327
• /
• 2005

Constructed wetlands provide several benefits that are not solely limited to storm water management and are becoming common in storm water management. In this research, four recently constructed wetlands underwent in situ and laboratory water sampling to determine their efficiency in removing storm water pollutants over a 5-month period. From the sampling results, it was determined that each of the wetlands was able to reduce the concentration of pollutants in the stormwater. To aid in the assessment of the wetlands against each other, a model was developed to determine the extent of removal of stormwater pollutants over the length of the wetland. The results from this model complimented the data collected from the field. Improvements, such as increased amounts of vegetation were recommended for the wetlands with the aim of increasing the effectiveness. Further investigations into the wetlands will allow for better understanding of the wetland's performance.

• 한국수자원학회논문집
• /
• 제51권6호
• /
• pp.491-501
• /
• 2018

본 연구는 도시 유역의 물 순환을 개선시키기 위해 최근 활발하게 적용되고 있는 저영향개발(low impact development, LID) 시설의 설계 및 계획 매개변수를 선정하기 위한 방법을 제시하였다. 이때 Storm Water Management Model (SWMM) 모형의 LID 시설 모의 기능을 활용하여 다양한 매개변수에 대해 민감도 분석 및 다양한 시나리오를 자동으로 수행하여 비교할 수 있도록 개발된 Water Management Analysis Module (WMAM)을 이용하였다. 본 연구는 최근 도시화가 진행되고 있는 서울의 한 유역에 적용하였다. 적용 결과 LID 중 하나인 투수성포장 시설이 없는 경우와 임의로 결정된 설계 및 계획 시나리오 보다 본 방법을 통해 도출된 시나리오가 총유출량 및 첨두유량 감소와 침투량 증가에 더 좋은 효과를 보였다. 향후 경제성을 고려한 방법을 개발한다면 실무에서도 활용될 수 있을 것으로 예상된다.

• 환경영향평가
• /
• 제8권4호
• /
• pp.1-12
• /
• 1999

본 연구의 목적은 지리정보시스템과 원격탐사를 이용하여 체계적이고 효율적인 수질관리 자료기반을 구축하고, 유역의 오염부하를 산정하여 장래의 수질을 예측할 수 있는 수질관리시스템을 구축하는데 있다. 수질관리를 위해서는 오염물질의 최적처리 등의 기술적 측면뿐만 아니라 수질환경에 관한 정확한 정보의 취득과 관리가 필요하다. 본 연구에서는 지형 및 속성정보의 입력 및 편집을 위해 ArcView 3.1을 사용하였으며, Avenue Script를 이용하여 사용자환경을 갖추도록 하였다. 또한, 토지피복분류를 위하여 20m 해상도의 SPOT XS영상을 대상으로 PCI 소프트웨어를 이용하여 분석하였다. 수질관리시스템은 데이터베이스 보조시스템과 Modeling 보조시스템으로 구성된다. 데이터베이스 보조시스템은 수치지형도에서 추출한 수치표고모델에서 분석한 유역분할도, 위성영상자료, 정부보고서, 통계자료들로 구성되며, Modeling 보조시스템은 강우 시와 비강우시의 유역의 오염부하량을 산정하고 수질예측을 하는 SPLM(Storm Pollutant Loading Model)과 NSPLM(Non-Storm Polutant Loading Model)으로 구성된다. 각각의 보조시스템은 그래픽 출력 부분과 결합하여 분석결과 및 유역현황을 표시하도록 설계되었다. 개발된 수질관리 시스템은 경기도 광주군 광주읍에 위치한 목현천 유역을 대상으로 적용되고 수정되었다.

• 대한환경공학회지
• /
• 제34권6호
• /
• pp.373-381
• /
• 2012

대전의 도시 소하천, 관평천 유역을 연구대상지역으로 강우시의 유량 및 수질 변화 특성을 파악하기 위한 원격 제어실시간 자동 모니터링 시스템을 설치하여 자료를 확보하고 이 시스템을 이용하여 확보된 강우시 연속측정 자료를 이용하여 도시유역 모델인 SWMM (Storm Water Management Model) 모델을 보정하는 데 사용하였다. 실시간 자동 모니터링 시스템은 강우량계, 초음파 수위계, 자동수질측정장치, 자동취수장치, 데이터 로거 및 전송장치 등으로 구성되었으며 원격으로 제어할 수 있도록 설계되었다. 강우시 유량은 초음파 수위계와 사각 위어 공식을 이용하여 지속적으로 측정이 가능하도록 설계되었으며 정확도는 수동측정을 병행하여 확인하였다. 수질센서로 측정할 수 없는 항목은 자동채수기에 의해 일정시간 간격으로 시료를 채취한 후 실험실로 이송하여 분석하여 자료를 확보하였다. 위에서 실측된 유량 및 수질 연속 자료를 이용하여 연구대상지역에 대해 SWMM 모델을 구축하였다. SWMM 모델의 보정과 검증 결과 유량은 매우 양호한 수준으로 예측하고 있으나 BOD, COD, SS, TN, TP 등의 예측은 강우 특성에 따라 차이가 있는 것으로 나타났다. 본 연구는 SWMM에 나타난 바와 같은 특정 유역에 고정된 형태의 오염물질 축적과 유출현상을 나타내는 경험식이 강우 및 선행강우 특성을 반영하여 수정될 필요가 있다는 것을 시사하고 있다. 본 연구에서 제안된 빗물 자동모니터링 및 모델링 시스템은 향후 강우에 따른 하천 수질관리를 위한 유역단위의 빗물 수량 수질 관리시설의 설계 및 운영에 중요한 자료로 활용될 수 있을 것으로 기대된다.

• 한국물환경학회지
• /
• 제24권2호
• /
• pp.180-184
• /
• 2008

A distributed hydrologic model of an urban drainage area on Bugok drainage area in Oncheon stream was developed and combined with a optimization method to determine the optimal location and number of best management practices (BMPs) for storm water runoff reduction. This model is based on the SCS-CN method and integrated with a distributed hydrologic network model of the drainage area using system of 4,211 hydrologic response units (HRUs). Optimal location is found by locating HRU combination that leads to a maximum reduction in peak flow at the drainage outlet in this model. The results of this study indicate the optimal locations and numbers of BMPs, however, for more exact application of this model, project cost and SCS-CN reduction rate of structural facilities such infiltration trench and pervious pavement will have to be considered.