• Journal of Korean Society of societal Security
• /
• v.1 no.1
• /
• pp.63-67
• /
• 2008

This study focuses on assessing the security ri sk or the terrorism in chemical process industries. This research modifies conventional method for assessing the terrorism risk. The risk assessment method is developed and it is implemented as software to analyze the possibility of terrorism and sabotage. This program includes five steps; asset characterization, threat assessment, vulnerability analysis, risk assessment and new countermeasures. It is a systematic, risk based approach in which risk is a function of the severity of consequences of an undesired event, the likelihood of adversary attack, and the likelihood of adversary success in causing the undesired event. The reliability of the program is verified using a dock zone case. The case dock zone includes a storage farm, a manufacturing plant, an electrical supply utility, a hydrotreater unit, many containers, and administration buildings. This study represents chemical terrorism response technology, the prevention plan, and new countermeasure to mitigate by using risk assessment methods in the chemical industry and public sector. This study suggests an effective approach to the chemical terrorism response management.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.395-400
• /
• 2017

The paper discussed the air-to-fuel ratio control of automotive fuel-injection systems using the cerebellar model articulation controller(CMAC) neural network. Because of the internal combustion engines and fuel-injection's dynamics is extremely nonlinear, it leads to the discontinuous of the fuel-injection and the traditional method of control based on table look up has the question of control accuracy low. The advantages about CMAC neural network are distributed storage information, parallel processing information, self-organizing and self-educated function. The unique structure of CMAC neural network and the processing method lets it have extensive application. In addition, by analyzing the output characteristics of oxygen sensor, calculating the rate of fuel-injection to maintain the air-to-fuel ratio. The CMAC may easily compensate for time delay. Experimental results proved that the way is more good than traditional for petrol control and the CMAC fuel-injection controller can keep ideal mixing ratio (A/F) for engine at any working conditions. The performance of power and economy is evidently improved.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.2
• /
• pp.74-82
• /
• 2015

In this study, a BMW plant process control system model which produces BMW is suggested and the BMW plant process controller with the following functions is developed. The first function is to operate the electronic overload relays to stop the blower for a certain period of time and to re-operate it again when the blower is overloaded. The second function is to close the motor operated valve automatically in case of power failure to prevent the circulation from the guided tank to the compost throwing tank and to block leak from the compost throwing tank due to the failure of ball valve. The third function is to transfer produced BMW from the concentration tank to 4 storage tanks for automatic managing of the BMW output. A device to measure the signal of the BMW plant process controller and a test equipment are developed. The designed BMW plant process controller is checked to see if it operates correctly according to the design specifications. The sequence control method based on BMW plant process controller is developed at a low cost in this study, so it is expected to bring improvements in the stability and the efficiency of system and to cause reductions in the operation and the management costs in the future.

• The Journal of the Korea Contents Association
• /
• v.4 no.1
• /
• pp.55-66
• /
• 2004

Recently, as the personal computers are supplied rapidly, they formed the nucleus of the computer system. But, because of the easiness that anyone uses them to go near easily, it is the fact that the security of personal computer is weakness. So, in the paper, 1 propose the technical method that minimizes the loss and leakage of important data. This paper implemented a crypto system for security of data file on personal computer and assistance storage medium. The way of encryption/decryption is applied by complexity method which mixed Diffie-Hellman key exchange protocol, a typical RC4(Rivest Cipher version 4) algorithm of stream cipher and a typical MD5(Message Digest version 5) of Hash Function. For valuation implemented crypto system, three criteria is presented, which are crypto complexity, processing time and pattern matching. And according to analysis the three criteria the crypto system is verified the security, efficiency and usefulness. The crypto system is programmed with Visual C++ language of Microsoft. And so, as this is software system, we shall have a technical security system at a minimum cost for all personal computer.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.4
• /
• pp.29-42
• /
• 2017

As the "Guidelines for GHG Environmental Assessment" was revised, it pointed out that the developers should evaluate GHG sequestration and storage of the developing site. However, the current guidelines only taking into account the quantitative reduction lost within the development site, and did not consider the qualitative decrease in the carbon sequestration capacity of forest edge produced by developments. In order to assess the quantitative and qualitative effects of vegetation carbon uptake, the CASA-NPP model and satellite image spatial-temporal fusion were used to estimate the annual net primary production in 2005 and 2015. The development projects between 2006 and 2014 were examined for evaluate quantitative changes in development site and qualitative changes in surroundings by development types. The RMSE value of the satellite image fusion results is less than 0.1 and approaches 0, and the correlation coefficient is more than 0.6, which shows relatively high prediction accuracy. The NPP estimation results range from 0 to $1335.53g\;C/m^2$ year before development and from 0 to $1333.77g\;C/m^2$ year after development. As a result of analyzing NPP reduction amount within the development area by type of forest development, the difference is not significant by type of development but it shows the lowest change in the sports facilities development. It was also found that the vegetation was most affected by the edge vegetation of industrial development. This suggests that the industrial development causes additional development in the surrounding area and indirectly influences the carbon sequestration function of edge vegetaion due to the increase of the edge and influx of disturbed species. The NPP calculation method and results presented in this study can be applied to quantitative and qualitative impact assessment of before and after development, and it can be applied to policies related to greenhouse gas in environmental impact assessment.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.81-88
• /
• 2021

In general, a non-explosive nylon wire cutting-based holding and release mechanism has been used to store and deploy deployable solar panels of CubeSat. However, with this method, accessing the solar panel's access port for charging the cube satellite's battery and electrical inspection and testing of the PCB and payloads while the solar panel is in storage is difficult. Additionally, the mechanism must have a reliable release function in an in-orbit environment, and reusability for stow and deploy of the solar panel, which is a hassle for the operator and difficult to maintain a consistent nylon wire fastening process. In this study, we proposed a pin-puller-based solar panel holding and release mechanism that can easily deploy a solar panel without cutting nylon wires by separating constraining pins. The proposed mechanism's release function and performance were verified through a solar panel deployment test and a maximum separation load measurement test. Through this, we also verified the design feasibility and effectiveness of the pin-puller-based separation device.

• Explosives and Blasting
• /
• v.41 no.4
• /
• pp.1-8
• /
• 2023

On August 4, 2020, 2750 tons of ammonium nitrate stored in a storage warehouse at the Port of Beirut exploded. This explosion is said to be the largest ammonium nitrate explosion ever. By applying the TNT equivalency method, TNT equivalent amount corresponding to the explosion energy of 2750 tons of ammonium nitrate was calculated, and it is found to be 856 tons. Overpressure and impulse were calculated in a range up to 3600 m from the blast using the Kingery-Bulmash explosion parameter calculator tool. As the distance from the explosion center increases, the overpressure and impulse decrease exponentially, but the overpressure decreases more significantly, showing that overpressure is more affected by distance than the impact. As a result of applying the damage criteria to evaluate the effects of overpressure and impulse on the structure, the critical distances at which partial collapse, major damage, and minor damage to the structure occur are found to be approximately 500, 800, and 2200 m from the center of the explosion, respectively. The probit function was applied to evaluate the probability of damage to structures and human body. The points where the probability of collapse, major damage, minor damage, and breakage of window-panes to structures are greater than 50% are found to be approximately 500, 810, 2200, and 3200 m, respectively. For people within 200 m from the center of the explosion, the probability of death due to lung damage is more than 99%, and the 50% probability of eardrum rupture is approximately 300 m. The points with a 100% probability of death due to skull rupture and whole body impact due to whole body displacement are evaluated to be 300 and 100 m, respectively.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.272-281
• /
• 2008

A layer channel, which can express effects on 3D image, is inserted to use it on application rendering effectively. The current method of effect rendering requires individual sources in storage and image processing, because it uses individual and mixed management of images and effects. However, we can save costs and improve results in images processing by processing both image and layer channels together. By changing image format to insert a layer channel in image and adding a hide function to conceal the layer channel and control to make it possible to approach image and layer channels simultaneously during loading image and techniques hiding the layer channel by changing image format with simple techniques, like alpha blending, etc., it is developed to improve reusability and be able to be used in all programs by combining the layer channel and image together, so that images in changed format can be viewed in general image viewers. With the configuration, we can improve processing speed by introducing image and layer channels simultaneously during loading images, and reduce the size of source storage space for layer channel images by inserting a layer channel in 3D images. Also, it allows managing images in 3D image and layer channels simultaneously, enabling effective expressions, and we can expect to use it effectively in multimedia image used in practical applications.

• Journal of Veterinary Clinics
• /
• v.26 no.5
• /
• pp.441-444
• /
• 2009

Ischemia-reperfusion (I/R) injury is associated with an increased risk of acute rejection, delayed graft function and long-term changes after kidney transplantation. The reperfusion models remain unsolved complications such as vascular obstruction and blood leakage. We developed an alternative model of isolated hemoperfusion in porcine kidneys. In the present study we introduced a newly developed reperfusion method. A connector was used instead of surgical suture for the vascular anastomosis on the inguinal region in which main femoral vessels are parallel and big enough to perfuse the kidney. To assess renal perfusion quality of the modified hemoreperfusion model, we analyzed both hemodynamic values and patterns of I/R injury following a renal reperfusion. Following unilateral nephrectomy, the kidneys were preserved for 0, 24 and 48 hours at $4^{\circ}C$ with histidine-tryptophan ketogluatarate (HTK) solution and reperfused for 3 hours by vascular anastomosis connected to the femoral artery and vein in inguinal region. Histolopathological examinations were assessed on kidney biopsy specimens, taken after each cold storage and reperfusion. No differences of hemodynamic values were observed between aorta and femoral artery. The average warm ischemia time before reperfusion start was $7.0{\pm}1.1$ minutes. There were no complications including vascular obstruction and blood leakage during the reperfusion. I/R injury of the perfused kidneys in this model was dependent upon the cold ischemia time. The results support that the modified perfusion model is simple and appropriate for the study of early renal I/R injury and transplant immunology.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.359-370
• /
• 2000

The purpose of this investigation was to observe the viscoelastic properties of five commercial flowable(Aeliteflo, Flow it, Revolution, Tetric flow, Compoglass flow), three conventional hybrid(Z-100, Z-250, P-60) and two condensable(Synergy compact, SureFil) resin composites. A dynamic oscillatory shear test was done to evaluate the storage shear modulus (G'), loss shear modulus(G"), loss tangent(tan ${\delta}$) and complex viscosity(${\eta}^*$) of the resin composites as a function of frequency - dynamic frequency sweep test from 0.01 to 100 rad/s at $25^{\circ}C$ - by using Advanced Rheometric Expansion System(ARES). To investigate the effect on the viscosity of resin composites of filler volume fraction, the filler weight % and volume % were measured by means of Archimedes' principle using a pyknometer. The results were as follows 1. The complex viscosity ${\eta}^*$ of flowable resins was lower than that of hybrid resins and significant differences were observed between brands. The complex viscosity ${\eta}^*$ of condensable resins was higher than that of hybrid resins. The order of complex viscosity ${\eta}^*$ at ${\omega}$=10 rad/s was as follows, Surefil, Synergy compact, P-60, Z-250, Z-100, Aeliteflo, Tetric flow, Compoglass flow, Flow it, Revolution. The relative complex viscosity of flowable resins compared to Z-100 was 0.04~0.56 but Surefil was 30.4 times higher than that of Z-100. 2. The storage shear modulus G' and the loss shear modulus G" of flowable resins were lower than those of hybrid resins but those of condensable resins were higher. The patterns of the change of loss tangent, tan ${\delta}$, of resin composites with increasing frequency were significantly different between brands. The phase angles, ${\delta}$, ranged from $30.2{\sim}78.1^{\circ}$ at ${\omega}$=10 rad/s. 3. All composite resins represent pseudoplastic nature with increasing shear rate. 4. The complex shear modulus $G^*$ and the phase angle ${\delta}$ was represented by the frequency domain phasor form, $G^*({\omega})=G^*e^{i{\delta}}=G^*{\angle}{\delta}$. The locus of frequency domain phasor plots in a complex plane was a valuable method that represent the viscoelastic properties of composite resins. 5. There was no direct linear correlationship but a weak positive relation was observed between filler volume % or weight % and the viscosity of the resin composites.