• Journal of Korea Water Resources Association
• /
• v.50 no.4
• /
• pp.241-252
• /
• 2017

This study aims to evaluate applicability of both online and offline parameter calibration techniques on rainfall-runoff modeling using a conceptual lumped hydrologic model. To achieve the goal, the storage function model was selected and then two different automatic calibration techniques: SCE-UA (offline method) and particle filter (online method) were applied to calibrate the optimal parameter sets for 9 rainfall events in the Cheoncheon catchment, upper area of the Yongdam multi-purpose dam. In order to assess reproducibility of hydrographs from the parameter sets of both techniques, the observed discharge of each event was divided into low flow (below average flow) and high flow (over average flow). The results show that the particle filter method, updating the parameters in real-time, provides more stable reproducibility than the SCE-UA method regardless of low and high flow. The optimal parameters estimated by SCE-UA are very sensitive to the selected objective functions used in this study: RMSE and HMLE. In particular, the parameter sets from RMSE and HMLE demonstrate superior goodness-of-fit values for high flow and low flow periods, respectively.

• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1169-1186
• /
• 2012

Storage function method has been used for flood forecasting in the major rivers in Korea, however, the researches on the relationship between the parameters and runoff characteristics was not sufficient. In addition, there has been a controversy about the optimized parameters without the consideration of the physical characteristics of the basin. Therefore, in this study, the SCE-UA method is used to optimize the parameters and the proposed method was applied with two stage optimization in the Jeongseon and Yeongwol watersheds located in the most upstream in the South Han river. The contour map was developed to investigate parameters and the error surface calculated from the runoff. The proposed parameters is to provide a range of the possible parameter set in a watershed, rather than a specific value. However, the applicability is examined using the average value of the proposed ranged parameters. In this study, the criticism about the optimization technique to find an optimal value having no physical meaning on a watershed is tried to avoid. The objective of this study is to provide a range of parameters for the flood forecasting model and the intuition about the behavior of the parameters, so the efficiency of flood forecasting is increased.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.35-43
• /
• 2005

Matrix converters have been studied for eliminating dc link of conventional converter-inverter system, and various undulation strategy have been proposed. Therefore, matrix converter have no energy storage component except for small ac later for the elimination of switching ripple, and can be made compact and highly reliable compare with the do link inverter system. Matrix converter, however, directly connected the input and the output terminals by bidirectional static switch. As a result if the input voltage are asymmetrical, and contain harmonics, the influence of the distortions directly appear on the output terminal. This problem is a major obstacle to the matrix converter. A new control method using average comparison strategy have been proposed in this paper. This control method realizes sinusoidal input and output current unity input displacement factor regardless of load power factor. Moreover, compensation of the asymmetrical and/or harmonic containing input voltage is automatically realized, and calculation time of control function is reduced.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.51-62
• /
• 2005

After figuring out the function of an amino acid sequence, we can infer the function of the other amino acids that have similar sequence composition. Besides, it is possible that we alter protein whose function we know, into useful protein using genetic engineering method. In this process. an original protein amino sequence produces various protein sequences that have different sequence composition. Here, a systematic technique is needed to manage protein version sequences and reference data of those sequences. Thus, in this paper we proposed a technique of managing protein version sequences based on local sequence alignment and a technique of managing protein historical reference data using Trigger This method automatically determines the similarity between an original sequence and each version sequence while the protein version sequences are stored into database. When this technique is employed, the storage space that stores protein sequences is also reduced. After storing the historical information of protein and analyzing the change of protein sequence, we expect that a new useful protein and drug are able to be discovered based on analysis of version sequence.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2255-2265
• /
• 2013

This study presents the width function-based Clark model. To this end, rescaled width function with distinction between hillslope and channel velocity is used as time-area curve and then it is routed through linear storage within the framework of not finite difference scheme used in original Clark model but analytical expression of linear storage routing. There are three parameters focused in this study: storage coefficient, hillslope velocity and channel velocity. SCE-UA, one of the popular global optimization methods, is applied to estimate them. The shapes of resulting IUHs from this study are evaluated in terms of the three statistical moments of hydrologic response functions: mean, variance and the third moment about the center of IUH. The correlation coefficients to the three statistical moments simulated in this study against these of observed hydrographs were estimated at 0.995 for the mean, 0.993 for the variance and 0.983 for the third moment about the center of IUH. The shape of resulting IUHs from this study give rise to satisfactory simulation results in terms of the mean and variance. But the third moment about the center of IUH tend to be overestimated. Clark model proposed in this study is superior to the one only taking into account mean and variance of IUH with respect to skewness, peak discharge and peak time of runoff hydrograph. From this result it is confirmed that the method suggested in this study is useful tool to reflect the heterogeneity of drainage path and hydrodynamic parameters. The variation of statistical moments of IUH are mainly influenced by storage coefficient and in turn the effect of channel velocity is greater than the one of hillslope velocity. Therefore storage coefficient and channel velocity are the crucial factors in shaping the form of IUH and should be considered carefully to apply Clark model proposed in this study.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.585-597
• /
• 2008

The aim of this study was to find an analytic solution to the problem of determining the optimal capacity (lot-size) of a batch-storage network to meet demand for a finished product in a system undergoing random failures of operating time and/or batch material. The superstructure of the plant considered here consists of a network of serially and/or parallel interlinked batch processes and storage units. The production processes transform a set of feedstock materials into another set of products with constant conversion factors. The final product demand flow is susceptible to short-term random variations in the cycle time and batch size as well as long-term variations in the average trend. Some of the production processes have random variations in product quantity. The spoiled materials are treated through regeneration or waste disposal processes. All other processes have random variations only in the cycle time. The objective function of the optimization is minimizing the total cost, which is composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units. A novel production and inventory analysis, the PSW (Periodic Square Wave) model, provides a judicious graphical method to find the upper and lower bounds of random flows. The advantage of this model is that it provides a set of simple analytic solutions while also maintaining a realistic description of the random material flows between processes and storage units; as a consequence of these analytic solutions, the computation burden is significantly reduced.

• Structural Engineering and Mechanics
• /
• v.27 no.6
• /
• pp.713-739
• /
• 2007

Nowadays computers can perform symbolic computations in addition to mere number crunching operations for which they were originally designed. Symbolic computation opens up exciting possibilities in Structural Mechanics and engineering. Classical areas have been increasingly neglected due to the advent of computers as well as general purpose finite element software. But now, classical analysis has reemerged as an attractive computer option due to the capabilities of symbolic computation. The repetitive cycles of simultaneous - equation sets required by the finite element technique can be eliminated by solving a single set in symbolic form, thus generating a truly closed-form solution. This consequently saves in data preparation, storage and execution time. The power of Symbolic computation is demonstrated by six examples by applying symbolic computation 1) to solve coupled shear wall 2) to generate beam element matrices 3) to find the natural frequency of a shear frame using transfer matrix method 4) to find the stresses of a plate subjected to in-plane loading using Levy's approach 5) to draw the influence surface for deflection of an isotropic plate simply supported on all sides 6) to get dynamic equilibrium equations from Lagrange equation. This paper also presents yet another computationally efficient and accurate numerical method which is based on the concept of derivative of a function expressed as a weighted linear sum of the function values at all the mesh points. Again this method is applied to solve the problems of 1) coupled shear wall 2) lateral buckling of thin-walled beams due to moment gradient 3) buckling of a column and 4) static and buckling analysis of circular plates of uniform or non-uniform thickness. The numerical results obtained are compared with those available in existing literature in order to verify their accuracy.

• Water for future
• /
• v.18 no.1
• /
• pp.85-94
• /
• 1985

A method is developed for the separation of the major base flow in a river hydrograph combining the numerical techniques and the empirical methods. The linearized Boussinesq equation and the storage function are used to obtain the base flow recession. The shape of base flow curve made by the recharge of the groundwater table aquifer resulting from rainfall in determined by the Singh and Stall's graphical method, and the continuous from for the curve is approximated by the multiple and polynomial regression. this procedure was successfully tested for the separation of base flow and the establishment of hydrograph in a natural watershed. It was found that the direct numerical method applied to the homogeneous linear second order ordinary differential equation system is not suited to obtain the recession curve, and the case that the loss is generated in the partially penetrating stream can not be solved by the method of this study.

• Journal of the Korean housing association
• /
• v.20 no.5
• /
• pp.31-39
• /
• 2009

The purpose of this study was to find out the residents' consciousness of the unit plan on condominium apartment and to contribute to develop a condominium apartment unit plan in Daejeon City. This research was performed by a questionnaire survey method, 464 data was collected from apartment residents lived in about $85\;m^2$ unit with 3 rooms and the apartments was limited to the complexes within 1-4 years of the length of building at Yuseong-gu and Seo-gu. By analyzing those data, findings are as follows: 1) Residents thought living room, kitchen and bathroom were importment space in a unit plan. They needed a storage function in an entrance and a intermediate room, and Anbang(mater bedroom) so did. 2) L-DK plan type was very popular and the type of front DK with L on the floor plan was preferred. This was unique results. 3) Sub-kitchen was needed for a refrigerator of Kimchi, the location of it was related to a main kitchen and a utility. the third room was needed for library, home office and storage space. 3) Bath-tub in An-bang and showe-booth in public bathroom was preferred. This was same to the popular trend of Korean condominium apartment. 4) The enlargment remodeling of balcony was showed livingroom balcony or personal bedrooms at the time of occupancy. They needed the balcony near a kitchen or an utility to equip a storage facility. Additionally, residents were preferred to their taste rather than a choice of interior concept package services.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.431-438
• /
• 2022

In functional materials, in situ experimental techniques as a function of external stimulus (e.g., electric field, magnetic field, light, etc.) or changes in ambient environments (e.g., temperature, humidity, pressure, etc.) are highly essential for analyzing how the physical properties of target materials are activated/evolved by the given stimulation. In particular, in situ electric-field-dependent X-ray diffraction (XRD) measurements have been extensively utilized for understanding the underlying mechanisms of the emerging electromechanical responses to external electric field in various ferroelectric, piezoelectric, and electrostrictive materials. This tutorial article briefly introduces basic principles/key concepts of in situ electric-field-dependent XRD analysis using a lab-scale XRD machine. We anticipate that the in situ XRD method provides a practical tool to systematically identify/monitor a structural modification of various electromechanical materials driven by applying an external electric field.