• 한국실내디자인학회논문집
• /
• 제15권6호
• /
• pp.139-149
• /
• 2006

Because of economic growth and the social trend to respect individuality, people's average commodity volume tends to increase. It makes people perceive the importance of storage space. The storage planning without consideration of commodity volume in the apartment can not satisfy the needs of residents. This study is developed focused on the $85m^2$ apartment which is the most representative and general type. The objectives of the study are to investigate the storage-capacity of $85m^2$ apartment offered by 4 construction companies to know the present storage condition, to investigate the average volumes and type of commodities in 30 families located in Seoul and Kyungkido to produce the necessary storage-capacity, and lastly to produce optimal storage-capacity and proportion of optimal storage-capacity considering the volume of the furniture owned by each resident. The results of the study are 1) the storage capacity for commodity volume in $85m^2$ apartment is $19.41m^3$. 2) the optimal storage-capacity which only counts the storage volume of built-in furniture is $17.14m^3$ 3) the proportion of optimal storage-capacity is 9.5% of the house-capacity.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.129-133
• /
• 2019

In this paper, we developed a system to monitor the storage capacity of suction-type device such as vacuum cleaner or crop harvesters. The monitoring system consists of load cells and a differential pressure sensor which simultaneously monitor the weight and volume of the stock. Since weighing objects stored in storage containers alone cannot fully monitor the level of filling, more accurate monitoring can be achieved by monitoring volume and fusion with weight information. The volume was monitored using a phenomenon in which the flow rate of the inhaled air varies depending on the volume of the object filled in the storage container. In this paper, we developed a system to monitor the storage in three stages: low, medium and high.

• International Journal of Fluid Machinery and Systems
• /
• 제10권3호
• /
• pp.209-217
• /
• 2017

The paper presents two novel concepts of increasing the energy storage capacity at pumped storage power plants, both existing and new projects. The concepts utilize compressed air as a working medium to displace water from a volume originally not available for storage. The concepts are likely to give additional storage volume at a low cost, however, much development and many investigations are needed before the concepts can be shown to be technical and economical feasible solutions for energy storage. The concepts are disclosed so that researchers and utilities can start those investigations, hopefully helping the green transition by providing highly valuable energy storage for a future renewable energy having a much higher share of renewable energies than the current systems.

• 대한가정학회지
• /
• 제27권4호
• /
• pp.73-84
• /
• 1989

The purpose of this study is to induce user to use storage equipment as fixed storage space in urban housing. The object of investigation is limited to the resident of detached and apartment house in Daegu, analysised the problems and their attitueds of using storage equipments amount of cloths and bel-clothes. On the basis of these recommended the optimum volume of storage space for clothes and bed-clothes by family types. Applied to the standard of detached house, the optimum volume of storage space for clothes and bed-clothes in each rooms are as following. 1) The volume of master room is ranged 7.34M3 and 8.65M3 the average is 7.97M3. 2) Children's room is ranged 1.18M3 and 3.26M3, the average is 2.51M3 under number of users and their age. 3) The aged room is calculated average 6.53M3.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2002년도 추계공동학술대회 정보환경 변화에 따른 신정보기술 패러다임
• /
• pp.350-362
• /
• 2002

높은 가용성 확장성, 시스템 성능의 요구를 만족시키기 위해 SAN(Storage Area Network)이 등장했다. SAN을 보다 효과적으로 활용할 수 있도록, 대부분의 SAN 운영체제들은 SAN에 부착된 물리적 저장장치들을 가상적으로 하나의 커다란 볼륨으로 보이게 하는 저장장치 가상화 개념을 지원한다. 저장장치 가상화의 핵심적인 역할을 하는 것이 바로 논리볼륨 관리자이다. 논리볼륨 관리자는 논리 주소를 물리 주소로 매핑시킴으로서 저장장치 가상화를 실현한다. 이 논문에서는 논리볼륨 관리자를 위한 효율적이고 유연한 매핑 기법을 설계하고 구현한다. 이 논문의 매핑 기법은 특정 시점의 볼륨이미지를 유지할 수 있는 스냅샷과 시스템을 정지시키지 않고 SAN에 디스크를 추가 또는 삭제할 수 있는 온라인 재구성 기능을 지원한다.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 추계공동학술대회
• /
• pp.350-362
• /
• 2002

높은 가용성, 확장성, 시스템 성능의 요구를 만족시키기 위해 SAN(Storage Area Network)이 등장했다. SAN을 보다 효과적으로 활용할 수 있도록, 대부분의 SAN 운영체제들은 SAN에 부착된 물리적 저장장치들을 가상적으로 하나의 커다란 볼륨으로 보이게 하는 저장장치 가상화 개념을 지원한다. 저장장치 가상화의 핵심적인 역할을 하는 것이 바로 논리볼륨 관리자이다. 논리볼륨 관리자는 논리 주소를 물리 주소로 매핑 시킴으로서 저장장치 가상화를 실현한다. 이 논문에서는 논리볼륨 관리자를 위한 효율적이고 유연한 매핑 기법을 설계하고 구현한다. 이 논문의 매핑 기법은 특정 시점의 볼륨이미지를 유지할 수 있는 스냅 샷과 시스템을 정지시키지 않고 SAN에 디스크를 추가 또는 삭제할 수 있는 온라인 재구성 기능을 지원한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.266-269
• /
• 2009

The Purpose of this study was thermal performance of solar hot water and space heating thermal storage tank. The combi storage tank was designed Tank in Tank type. The tank volume for space heating was 700 $\ell $ and tank volume for hot water was 150 $\ell $. Tank in Tank type storage tank was to replace heat exchange to hot water tank. The result showed that the Heating value was 67.25MJ and domestic hot water value was 51.93MJ. Supply to the hot water volume was 521 $\ell $ more than about 3 times as that of the hot water tank volume.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제9권6호
• /
• pp.718-731
• /
• 2003

높은 가용성, 확장성, 시스템 성능의 요구를 만족시키기 위해 SAN(Storage Area Network)이 등장했다. 대부분의 SAM 운영 S/W들은 SAN을 보다 효과적으로 활용하기 위해서 SAN에 부착된 물리적 저장장치들을 가상적으로 하나의 커다란 볼륨으로 보이게 하는 저장장치 가상화 개념을 지원한다. 저장장치 가상화의 핵심적인 역할을 하는 것이 바로 논리볼륨 관리자이다. 논리볼륨 관리자는 논리주소를 물리 주소로 매핑 시킴으로서 저장장치 가상화를 실현한다. 이 논문에서는 논리볼륨 관리자를 위한 효율적이고 유연한 매핑기법을 설계하고 구현한다. 더불어 매핑 테이블 기반 매핑 방법에서 유연한 매핑을 돕기 위한 자유공간 관리기법을 설계하고 구현한다. 이 논문의 매핑기법은 특정 시점의 볼륨이미지를 유지할 수 있는 스냅샷과 시스템을 정지시키지 않고 SAN에 저장장치를 추가 또는 삭제할 수 있는 온라인 재구성 기능을 지원한다. 또한 이 논문에서 제안한 기법에 대한 성능 평가를 수행하여 제안하는 기법이 매핑 관리자로서 의미가 있음을 보인다.

• 한국자동차공학회논문집
• /
• 제23권4호
• /
• pp.428-435
• /
• 2015

This paper presents the experimental study of cabin thermal comfort using a cold storage heat exchanger in a vehicle air-conditioning system. Recent vehicle-applied ISG functions for fuel economy and emission, but when vehicles stop, compressors in the air-conditioning system stop, and the cabin temperature sharply increases, making passengers feel thermal discomfort. This study conducts thermal comfort evaluation in the vehicle, which is applied to a cold storage system for the climate control wind tunnel test and the vehicle fleet road test with various airflow volume rates and ambient temperatures blowing to the cold storage heat exchanger. The experimental results, in the cold storage system, air discharge temperature is $3.1-4.2^{\circ}C$ lower than current air-conditioning system when the compressor stops and provides cold air for at least 38 extra seconds. In addition, the blowing airflow volume to the cold storage heat exchanger with various ambient temperature was examined for the control logic of the cold storage system, and in the results, the airflow volume rate is dominant over the outside temperature. For this study, a cold storage system is economically useful to keep the cabin at a thermally comfortable level during the short period when the engine stops in ISG vehicles.

• 한국수소및신에너지학회논문집
• /
• 제17권1호
• /
• pp.47-54
• /
• 2006

Activated carbon fibers (ACFs) with high surface area and pore volume were modified with metal Ni impregnation and fluorination and investigated hydrogen storage properties by volumetric method. Micropore volume values of ACFs obtained from surface modification with Ni impregnation and fluorination were decreased 9 and 35 %, respectively. Hydrogen storage capacities of fluorinated ACFs were slightly changed, on the other hand, that of Ni impregnated ACF was considerably increased. It means that hydrogen was not only adsorbed on ACF surface, but also on Ni metal surface by means of dissociation. Although the microphone volume of ACF modified with fluorination was decreased, its hydrogen storage were found not to be changed compared with fresh ACF. These results indicated that the surface of ACF after fluorination modification may be strongly attracted hydrogen due to high electronegativity of fluorine. Therefore, it was proven that hydrogen storage capacity was related with micropore volume and surface property of carbon materials as well as specific surface area.