• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.292-298
• /
• 1998

The isolates from putrefying soybean curd were identified as Acinetobacter calcoaceticus, Bacillus cereus, Bacillus sp., Cardiobacterium sp., Escherichia coli, Klebsiella pneumoniae, Pantoea sp., Salmonella typhimurium, Staphylococcus aureus, Xenorhabdus luminescens, Yersinia sp.. The existence percentages of the bacteria from putrefying soybean curd at room temperature storage were Bacillus cereus J55 23.57%, Xenorhabdus luminescens J48 22.73%, Acinetobacter calcoaceticus J61 22.26%, Klebsiella pneumoniae J62 21.25%, Salmonella typhimurium J51 2.87%, Pantoea sp. J57 2.65%, Bacillus sp. J58 1.43%, Cardiobacterium sp. J54 1.26%, Escherichia coli J53 1.20%, Staphvlococcus aureus J6O 0.93%, Yersinia sp. J50 0.05%, respectively. Four out of eleven bacteria as B. cereu J55, X. luminescens J48, Ac. calcoaceticus J61, Kl. pneumoniae J62 putrefied soybean curd and those bacteria produce amylase or proteinase as a extracellular enzyme. But S. typhimurium J51, Pantoea sp. J57, Bacillus sp. J58, Cardiobacterium sp. J54, E. coli 153, St. aureus J60, Yersinia sp. J50 were not putrefied soybean curd. The isolates detected to resistant on various antimicrobial agents. The majority were resistant to aminoside antiboitics as amicacin, gentamicin, tobramycin and were susceptible to ${\beta}$-lactamine antibiotics as penicillin G, oxacillin, cephalothin cefazolin, cefamandole.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1294-1300
• /
• 2012

To investigate the effects of oyster mushroom on the quality of Sulgidduk and Gyeongdan, freeze-dried mushroom power and mushroom extract were prepared. Dough for Gyeongdan was held for 0~6 hours at room temperature before cooking in order to allow for enzyme reaction. Upon addition of 2~5% mushroom power or 1~2% mushroom extract, the hardness of Sulgidduk decreased while the storage periods could be extended 1~2 days. Avrami rate constant (k) was 0.0111 for 2% power-added rice cake and 0.044 for the control. In Gyeongdan, hardness also decreased by addition of mushroom. Avrami rate constant (k) was 0.0178 for 10% mushroom power-added Gyeongdan and 0.0652 for the control. In a sensory test, Sulgidduk with 1% mushroom powder showed the highest score. Overall, addition of 1% mushroom powder to rice was appropriate for Sulgidduk. For Gyeongdan, addition of 1~2% mushroom powder was appropriate.

• Journal of Hydrogen and New Energy
• /
• v.10 no.4
• /
• pp.225-232
• /
• 1999

The $Mg_2Ni$ hydrogen storage alloys which have much higher theoretical discharge capacity than $AB_5$ and $AB_2$ type alloys were synthesized by mechanical alloying with some additives and subjected to the electrochemical measurements. Two different processes were employed to the synthesis of $Mg_2Ni$ alloys with using the high energy ball mill SPEX 8000. One was only ball milling, 12 hrs, the Mg and Ni powders for 12 hrs with additives such as $AB_5$, Ni, Co and Cu powders. In the other process the Mg and Ni powders were ball milled for 1 hr first and then heat treated at $300{\sim}400^{\circ}C$ for 1 hr to get $Mg_2Ni$ alloy, and finally the $Mg_2Ni$ alloy powders were ball milled with the additives for 12 hrs. The alloy powders prepared were compacted at room temperature under $7.64tons/cm^2$ into disk type electrodes for the electrochemical measurements. The experimntal results showed that the electrodes prepared with the heat treated alloy powders had a higher discharge capacities than those without heat treatment. The addition of Ni caused an increase of the discharge capacity and the addition of Co improved the cycling characteristics. The electrode prepared by ball milling of $Mg_2Ni$ and 10wt% Ni powders has showed the highest discharge capacity, 546mAh/g.alloy, which was 55% of the theoretical capacity.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.227-238
• /
• 2016

This review article highlights different types of nano-sized catalysts for the selective alcohol oxidation to form aldehydes (or ketones) with supported or immobilized metal nanoparticles. Metal nanoparticle catalysts are obtained through dispersing metal nanoparticles over a solid support with a large surface area. The nanocatalysts have wide technological applications to industrial and academic fields such as organic synthesis, fuel cells, biodiesel production, oil cracking, energy conversion and storage, medicine, water treatment, solid rocket propellants, chemicals and dyes. One of main reactions for the nanocatalyst is an aerobic oxidation of alcohols to produce important intermediates for various applications. The oxidation of alcohols by supported nanocatalysts including gold, palladium, ruthenium, and vanadium is very economical, green and environmentally benign reaction leading to decrease byproducts and reduce the cost of reagents as opposed to stoichiometric reactions. In addition, the room temperature alcohol oxidation using nanocatalysts is introduced.

• Clean Technology
• /
• v.23 no.4
• /
• pp.401-407
• /
• 2017

This paper describes a shake-flask fermentation of Acacia flower producing whitening- and antioxidant- agents. Tyrosinase activity was inhibited in the presence of traditional and flask-fermentation broths whereas no inhibitory effect of flower extract was observed. Tyrosinase inhibition was 40% in the presence of solution containing 10% of extract from fermentation broth and it increased by increase in the concentration of it. Arbutin ($20mg\;mL^{-1}$) and kojic acid ($80{\mu}g\;mL^{-1}$) gave 90% and 58% inhibition, respectively. The result indicates that whitening activity of 40% extract solution was comparable to that of kojic acid ($80{\mu}g\;mL^{-1}$). The comparable antioxidant activity was observed for 60% extract and $10mg\;mL^{-1}$ vitamin solution. No noticeable toxicity was observed with extract. The physicochemical stability of fermentation supernatant was observed at room temperature storage condition. The result clearly shows that shake-flask fermentation of Acacia flower produced whitening agent for functional cosmetics.

• Korean journal of food and cookery science
• /
• v.21 no.1 s.85
• /
• pp.117-123
• /
• 2005

Washed rice was coated by spraying aqueous dandelion (Taraxacum officinale) extracts at 20, 30, 40 $^{\circ}$Brix and dried at room temperature. The coating procedure was conducted 5 mL/min for 10min. Property changes in the dandelion coated rice and un-coated cooked rice were observed during 2 days of storage. Increasing the coating concentration was associated with lower color values (L, a value) and moisture contents. Sensory and texture properties generally decreased in the cooked rice coated with dandelion more than the control (non-coated rice). But, D-20(20 $^{\circ}$Brix of the dandelion concentration) resulted in better textural properties and sensory scores for hardness and overall acceptability in cooked rice. Compared to the control, the washed rice coated with 20 $^{\circ}$Brix for 0 and 2 days showed better quality in sensory activities, a lower gel consistency and better textural activities. It was concluded that the optimum coating ration of rice and added dandelion extract for cooking were 20 $^{\circ}$Brix and $5\%$ respectively, in proportion to the total weight of raw rice.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1362-1366
• /
• 1998

The sterilizing effect of electron beam was compared with that of gamma irradiation for commercial ginseng powders. White and red ginseng powders were contaminated by about $10^5\;CFU/g$ of total bacteria and by $10^3\;CFU$ of coliforms only in white ginseng powder. Data of microbial population for the sterilizing effect of electron beam irradiation showed that no microorganisms were detected in the samples irradiated up to 7.5 kGy for total aerobic bacteria and 2.5 kGy for molds and coliforms. Such doses were effective for controlling the microbial growth in the samples during 4 months of storage at room temperature. Decimal reduction doses $(D_{10}$ value) on the initial bacterial populations were $2.85{\sim}3.75\;kGy$ in electron beam and $2.33{\sim}2.44\;kGy$ in gamma irradiation, which were influenced by the initial microbial loads and the energy applied. Compared with gamma irradiation, electron beam showed a similar result in its sterilizing effect on ginseng powders, suggesting its potential utilization in due time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.493-499
• /
• 2011

The objective of this study was to find the way to prolong the storage time of sawdust-based oyster mushroom (Pleurotus osteratus) spent substrate (OMSS) by fermenting with potential probiotic microorganisms to recycle the otherwise waste of mushroom farms. To this purpose, lactic acid bacteria (LAB) were screened to select the best lactic acid-producing strains. Three strains of LAB (Lactobacillus plantarum Lp1', Pediococcus acidilacticii Pa193, L. plantarum Lp2M) were selected and in mixture they lowered the pH of the fermented OMSS to 3.81. fOMSS (fermented sawdust-based oyster mushroom spent substrate) could be stored at room temperature for at least 17 days without any deterioration of feed quality based on the pH, smell, and color. In dry matter disappearance rate in situ, commercial TMR (total mixed ration), OMSS and OMMM (oyster mushroom mycelium mass) showed no significant differences between the samples after 6, 12 and 24 h incubation except for 48 h. Two separate field studies were performed to test the effects of fOMSS supplement on the growth performance of postweaning Holstein calves. Field trials included groups of animals feeding calf starter supplemented with: Control (no supplement), AB (colistin 0.08% and oxyneo 110/110 0.1%), fOMSS (10% fOMSS) and fConc (10% fermented concentrate) and DFM (direct-fed microbials, average $10^9$ cfu for each of three LAB/d/head). Growth performance (average daily gain and feed efficiency) of the fOMSS supplement group was higher than that of AB followed by fConc and DFM even though there was no statistically significant difference. The Control group was lower than any other group. Various hematological values including IgG, IgA, RBC (red blood cell), hemoglobin, and hematocrit were measured every 10 days to check any unusual abnormality for all groups in trial I and II, and they were within a normal and safe range. Our results suggest that sawdust-based OMSS could be recycled after fermentation with three probiotic LAB strains as a feed supplement for post-weaning calves, and fOMSS has the beneficial effects of an alternative to antibiotics for a growth enhancer in dairy calves.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.493-501
• /
• 2002

This study evaluated the microleakage performance of four self-etcing primer adhesives(Clearfil SE Bond, Clearfil Liner Bond 2, UniFil Bond, and FL Bond) and one self-etching adhesive(Prompt L-Pop). Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of 50 extracted human molar teeth. Prepared teeth were randomly divided into five groups and restored using one of five adhesives and composite resins: Prompt L-Pop/Filtek Z 250(Group 1), Clearfil SE Bond/Clearfil AP-X(Group 2), Clearfil Liner Bond 2/Clearfil AP-X(Group 3), UniFil Bond/UniFil F(Group 4), and FL Bond/Filtek Z 250(Group 5). Following one day storage in room temperature water, the restored teeth were thermocycled for 500 cycles between 5$^{\circ}C$ and 55$^{\circ}C$. Marginal microleakage was assessed by dye penetration using 2% methylene blue dye. After 24 hours, the teeth were sectioned longitudinally and evaluated for microleakage under steromicroscope The data were statistically analysed by Kruskal-Wallis Test, Mann-Whitney and Wilcoxon signed ranked tests. The results of this study were as follows ; 1. The microleakges at both enamel and dentinal mal$.$gins were the lowest in group 4. increasing among groups in the following order: group 2, follwed by group 5, follwed by group 1, and the highest in group 3. 2. At the enamel margins, the microleakage of group 3 was significantly higher than those of groups 2. 4 and 5(p<0.05), and also the microleakage of group 1 was statistically higher than those of groups 2 and 5(p<0.05). 3. At the dentinal margins, microleakage of group 3 was signincantly higher than microleakages of groups 1, 2, 4 and 5(p<0.05). 4. Compared with microleakages between the enamel and dentinal margins of each group, groups 1, 4 and 5 at enamel margin and group 2 and group 3 at dentinal margin were higher microleakage. But there was no significant difference between enamel and dentinal microleakages of each group(p>0.05).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.1
• /
• pp.10-19
• /
• 1986

A study on the rapid fermentation of fish sauce has been carried out for effective utilization of sardine. The frozen sardine was thawed at room temperature, chopped, homogenized with equal amount of water and then hydrolyzed by addition of commercial proteolytic enzymes such as bromelain, papaya protease, ficin and a enzyme mixture under different conditions of hydrolysis. The effect of wheat gluten for masking fishy odor and color development during thermal treatment were also tested. The reaction mixture was heated for 30 minutes at $100^{\circ}C$ for enzyme inactivation, pasteurization and color development and then centrifuged for 20 minutes at 4,000 rpm. Finally, table salt and benzoic acid were added for bacteriostatic effect. The results were summarized as follows ; 1. The hydrolyzing temperature, time, pH and the concentration of enzymes based on the weight of whole sardine for optimal hydrolysis were as follows: autolysis, $52.5^{\circ}C$, 4 hours, pH 8.0: with $0.25\%$ bromelain, $52.5^{\circ}C$, 4 hours, pH 6.6 :with $0.25\%$ ficin, $52.5^{\circ}C$, 4 hours, pH 6.8: with $0.3\%$ papaya protease, $52.5^{\circ}C$, 4 hours, pH 6.6: with $6\%$ enzyme mixture, $52.5^{\circ}C$, 4 hours, pH 6.9, respectively. But pH control was not much beneficial in increasing yield. 2. The hydrolytic reaction of chopped sardine with proteolytic enzymes could be interpreted as a first order reaction that devided into 2 periods with different reaction rate constsnts. $Q_{10}$ values of the first period prior to 4 hours were 1.23 to 1.31, and those of post 4 hours were 1.25 to 1.55. The corresponding activation energies were $1.81{\times}10^4\;to\;2.34{\times}10^4\;kJ/kmol$ and $1.92{\times}10^4\;to\;3.77{\times}10^4\;kJ/kmol$, respectively. 3. The reasonable amount of $75\%$ vital wheat gluten for addition was $9\%$ of chopped sardine. 4. The dark brown color was mainly developed during the thermal treatment for 30 minutes at $100^{\circ}C$ and not changed during storage.