• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3898-3906
• /
• 2023

The paper notes that the most common way of handling spent nuclear fuel (SNF) of power reactors is its temporary long-term dry storage. At the same time, the operation of the dry spent fuel storage facilities almost never use the modern capabilities of information systems in safety control and collecting information for the next studies under implementation of aging management programs. The author proposes a structure of an information system that can be implemented in a dry spent fuel storage facility with ventilated storage containers. To control the thermal component of spent fuel storage safety, a database structure has been developed, which contains 5 tables. An algorithm for monitoring the thermal state of spent fuel was created for the proposed information system, which is based on the comparison of measured and forecast values of the safety criterion, in which the level of heating the ventilation air temperature was chosen. Predictive values of the safety criterion are obtained on the basis of previously published studies. The proposed algorithm is an implementation of the information function of the system. The proposed information system can be used for effective thermal monitoring and collecting information for the next studies under the implementation of aging management programs for spent fuel storage equipment, permanent control of spent fuel storage safety, staff training, etc.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.22 no.2
• /
• pp.201-210
• /
• 2024

Because most spent nuclear fuel storage casks have been designed for low burnup fuel, a safety-significant high burnup dry storage cask must be developed for nuclear facilities in Korea to store the increasing high burnup and damaged fuels. More than 20% of fuels generated by PWRs comprise high burnup fuels. This study conducted a structural safety evaluation of the preliminary designs for a high burnup storage cask with 21 spent nuclear fuels and evaluated feasible loading conditions under normal, off-normal, and accident conditions. Two types of metal and concrete storage casks were used in the evaluation. Structural integrity was assessed by comparing load combinations and stress intensity limits under each condition. Evaluation results showed that the storage cask had secured structural integrity as it satisfied the stress intensity limit under normal, off-normal, and accident conditions. These results can be used as baseline data for the detailed design of high burnup storage casks.

• Journal of Food Hygiene and Safety
• /
• v.1 no.1
• /
• pp.107-113
• /
• 1986

It is estimated that the loss of Korean agricultural and fishery products during the storage period is usually more than 20%, and it is difficult to increase agricultural products by a 10% annual rate directly. Therefore, development of food preservation techniques has now become a most important atternative for the indirect increase of such products and for its senitary distribution. Changes eating habits and improved living conditions have accelerated the demand for convenience food production and for this reason it is essential that raw materials at stable, resonable prices and hygienic quality be available the year round. At the end of 1980, the Korean government conceded th economical feasibility of the storage of foods by irradiation and a procedure for preserving food by irradiation on a batch scale was successfully developed by KAERI in 1982. Based on the research results accomplished by the KAERI and on the recommendation on wholesomeness of irradiated food by Joint Committee of FAO/IAEA/WHO in 1980, the approval of wholesomeness of irradiated food was declared by presidential decree in June 1985 and the procedure of permission for individual items is in progress. Korean private firms (Ryung Young Co.) which was technically assisted by KAERI for five years have taken mush interest in the establishment of such facilities in Korea, therefore Ryung Young Co. had proposed for the construction of 500 Kci Co-60 irradiator to the Ministry of Science and Technology in July 1984. The permission of construction has approved by government in May 1985. The commercial irradiator will be constructed as one of the most modernized facilities until May 1987 and that facilities will contribute the propagation of commercial storage of foods and its hygienic quality.

• Tunnel and Underground Space
• /
• v.17 no.6
• /
• pp.475-483
• /
• 2007

With increasing demand for LNG as energy resources and need for $CO_2$ sequestration as greenhouse gas, more storage facilities are required in Korea. Due to the recent acute safety concerns and land shortage, storage facilities tend to be located underground. In design and construction of underground storage for low and high temperature materials, besides their mechanical characteristics, the thermal characteristics of rock under temperature variation should be understood. In this study, laboratory experiments for the measurement of the thermal expansion coefficient of rock were performed using strain gauge in consideration of the particle size of mineral and experiment temperature range. Experiment results show that thermal expansion coefficient decreased as the temperature decreases. In addition, linear thermal expansion coefficient was developed for typical Korean rocks such as granite. The results of this study can be utilized for the evaluation of thermal propagation in rock mass and the thermo-mechanical stability of underground facilities.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.396-404
• /
• 2000

Post harvest processes for rice include drying, storage and processing. Drying has a great effect on the quality of the grain. The existing rice centers are with the ill equipped, especially with drying and storage facilities. The rice harvesting has bully mechanized, a large volume of rice with high moisture content are taken to the rice processing complex(RPC). Three, the need for drying and storage facilities becomes more urgent. At present the daily drying capacity of RPC can't exceed over 40~50 M/T. Therefore new technology and facilities for a high quality and main efficient drying should be introduced one such technology is the continuous flow drying system. This research, aims to test performance efficiency the mixed continuous flow grain dryer was whose daily drying capacity is 100 M/T. The results of the performance tests of the dryer are shown as follows; (1) The temperature distribution of the drying modules were measured by a temperature recorder. The fifth module showed the highest value, followed by the seventh and the third. (2) When the intake air temperature was $55^{circ}C$, the drying rates were 1.7 and 2.6%, wb/pass in the exhaust temperatures of 20 and $22^{circ}C$. And when the intake air temperature was $60^{circ}C$, the drying rates were 1.7 and 2.3%, wb/pass in the exhaust temperatures of 22 and $25^{circ}C$. (3) The average increased rate of cracked grains after the drying process was 0.7% which is below the tolerance limit (2.0%) of the continuous grain dryer.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.40-47
• /
• 2002

The practices of the construction and management of the petroleum and hazardous chemical compound storage facilities in Korea were investigated extensively, and the problems were identified. The advanced technologies in the U.S.A were comparatively studied. Considering the effectiveness of leak prevention and applicability, the following measures were suggested. To prevent corrosion of a tank, a clad tank, an interior lining tank, or a double-wall tank were thought to be the most cost effective. For piping. use of non-metalic materials was suggested. A catchment basin seemed to be effective for preventing spills. For monitoring of leaks, constructions of more than one of detection systems, such as an automatic leak detection device. a vapor detection system, a groundwater monitoring system, or a double-wall monitoring system, were recommended.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.35-43
• /
• 2014

Usage of the inorganic floor finishing material can be advantageous to overcome some problems of traditional organic-based floor finishing material used for hazardous material storage facilities. A spark can be produced by physical impact between the flooring and the flooring disposal equipment while removing the existing flooring. In order to prevent a fire hazard, which may be caused the spark, it is feasible that a construction can be implemented without removing the existing flooring. Moreover, the top coating material containing an antistatic agent is effective to prevent secondary damage caused by static electricity after finishing the construction of the flooring. Therefore, the inorganic floor finishing material of the this study is expected to be beneficial for safety management and economical aspect for inspectors.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.139-146
• /
• 2017

This study endeavors to propose factors that should be intensively managed by using an IPA model to analyze the strengths of military logistics. Based on the improvement measures, we constructed a questionnaire with 5 points of Likert scale and analyzed the importance and satisfaction through SPSS 23. Examination of several evaluation factors revealed 'expansion of and modernization storage facilities' as the most important factor, 'merger and abolition of regional logistics work' (3.56) had the highest satisfaction level. Factors involving the expansion and modernization of the storage facilities showed the largest difference between importance level and satisfaction level, at 2.01. This indicates the necessity for an overall review of the expansion and modernization of storage facilities related to military logistics. This study aims to identify the areas that should be improved firstly in military logistics and concentrate on management to create more effective results. Thus it suggests that this study has a concentration on management for the streamlining of military logistics.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.34-42
• /
• 2023

Considering the contribution of industrial facilities to the national economy, securing operability against earthquakes is very important. However, the basic concept of current seismic design mainly allows ductile behavior of facilities against large-scale earthquakes and only considers structural safety for the purpose of preventing collapse. In order to secure the operability of industrial facilities, the level of seismic performance to maintain operability may vary depending on the structural behavior characteristics of the industrial facility, and a seismic design method is needed to satisfy this. In this study, a ground storage tanks Nonlinear seismic behavior characteristics(R-μ-T) were analyzed through nonlinear response history analysis, and based on this, a new reliability-based, performance-based seismic design method was proposed.

• Journal of the Korean housing association
• /
• v.19 no.4
• /
• pp.31-39
• /
• 2008

The physical environment is one of several service characteristics that are important contributors to service quality. As far as public service buildings, public community facilities serve as arenas for education, social interaction, leisure, and health activities for community districts. The purpose of this study was to investigate the physical state of public community facilities and use of public community facilities in Seoul and Suwon and to identify expectations of users toward the physical environment and service aspects. Site visits to four public community facilities were conducted and surveys were distributed for this study, with one hundred ninety two questionnaires analyzed. Results suggest that in order to provide more equal benefits and service to the public, cities should provide several smaller instead of one large complex community facility. Additionally, facility users indicated large gaps between their expectations and the current state of facilities due to lack of storage, noise and difficulty of use. In general, physical characteristics should be improved rather than employee's attitudes and service behaviors, resulting in greater service quality.