• 한국BIM학회 논문집
• /
• 제3권2호
• /
• pp.10-18
• /
• 2013

In the architectural design industry recent BIM system was introduced to the vast amount of information generated by the process, who need it and require the need to manage the construction of information related to production, storage, delivery. In addition, for the project to perform the work involved collaboration between organizations is essential. The purpose of this study was to BIM standard for the system to effectively utilize BIM technology and development of the BIM business support collaboration system, to establish a BIM application environment, a variety of information in the field of architectural design that can be used practically efficient transcription.

• Journal of Pharmaceutical Investigation
• /
• 제38권6호
• /
• pp.393-398
• /
• 2008

A propofol delivery system was prepared using two biocompatible polymeric surfactants, poloxamer 407 and PEG 400. The nanoparticular stability of the micellar system was evaluated in terms of temperature change, storage time and composition. The particle size of the system was slightly increased with elevating temperature from $4^{\circ}C$ to $25^{\circ}C$, but its distribution was unimodal. At $40^{\circ}C$, the system presented a bimodal particle size distribution and the increase in the fraction of particles larger than 15 nm. This result might be due to the expansion of the nanoparticles through micellar swelling at the high temperature. It was found that propofol was gradually come out of the system, stored for a month at three different temperatures (4, 25 and $40^{\circ}C$). The drug loss was apparently dependent on temperature and the system composition. Increasing temperature induced the acceleration of the drug loss of $7{\sim}10%$ at $4^{\circ}C$ and $14{\sim}16 %$ at $40^{\circ}C$. This may be owing to the high diffusivity resulting from the swelling of the hydrophilic surface of the nanoparticle at high temperature. However, the addition of PEG 400 to the system led to the reduction of the drug loss. This result is associated with the previous investigation that PEG coverage decreased diffusion coefficient because of the formation of the denser structure on the surface of nanoparticulate. Nevertheless, the limited amount of PEG, less than 2% (w/v), should be used to prevent the precipitation and discoloration of the system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.22-23
• /
• 2015

As wireless power transfer (WPT) technology using strongly coupled electromagnetic resonators is a recently explored technique to realize the large power delivery and storage without any cable or wire, this technique is required for diffusion of electric vehicles (EVs) since it makes possible a convenient charging system. Typically, since the normal conducting coils are used as a transmitting coil in the CPT system, there is limited to deliver the large power promptly in the contactless EV charging system. From this reason, we proposed the combination CPT technology with HTS transmitting antenna, In this study, we examined the improvement of transmission efficiency and properties for HTS and copper antennas, respectively, at 30 cm distance. Thus, we obtained improved transfer efficiency with HTS antenna over 10% compared with copper antenna

• 한국축산식품학회지
• /
• 제39권5호
• /
• pp.831-843
• /
• 2019

The purposes of this research were to form chitosan oligosaccharide (CSO)/A2 ${\beta}$-casein nano-delivery systems (NDSs) and to investigate the effects of production variables, such as CSO concentration levels (0.1%, 0.2%, and 0.3%, w/v) and manufacturing temperature ($5^{\circ}C$, $20^{\circ}C$, and $35^{\circ}C$), on the production and physicochemical characteristics of CSO/A2 ${\beta}$-casein NDSs to carry resveratrol. The morphological characteristics of CSO/A2 ${\beta}$-casein NDSs were assessed by the use of transmission electron microscopy (TEM) and particle size analyzer. High-performance liquid chromatography (HPLC) was applied to determine the entrapment efficiency (EE) of resveratrol. In the TEM images, globular-shaped particles with a diameter from 126 to 266 nm were examined implying that NDSs was successfully formed. As CSO concentration level was increased, the size and zeta-potential values of NDSs were significantly (p<0.05) increased. An increase in manufacturing temperature from $5^{\circ}C$ to $35^{\circ}C$ resulted in a significant (p<0.05) increase in the size and polydispersity index of NDSs. Over 85% of resveratrol was favorably entrapped in CSO/A2 ${\beta}$-casein NDSs. The entrapment efficiency (EE) of resveratrol was significantly (p<0.05) enhanced with an increase in manufacturing temperature while CSO concentration level did not significantly affect EE of resveratrol. There were no significant (p<0.05) changes observed in the size and polydispersity index of NDSs during heat treatments and storage in model milk and yogurt indicating that CSO/A2 ${\beta}$-casein NDSs exhibited excellent physical stability. In conclusion, the CSO concentration level and manufacturing temperature were the crucial determinants affecting the physicochemical characteristics of CSO/A2 ${\beta}$-casein NDSs containing resveratrol.

• 한국컴퓨터정보학회논문지
• /
• 제27권2호
• /
• pp.61-69
• /
• 2022

배달산업이 COVID-19 상황과 함께 요식업을 중심으로 크게 성장함에 따라 배달업 종사자가 크게 증가했다. 그와 함께 개인형 모빌리티(Personal Mobility: PM)를 활용한 새로운 배달 형태가 등장했으며, 이륜차 혹은 PM 관련 사고는 꾸준히 증가하고 있다. 본 연구는 안전 배달 모니터링 환경을 구축하기 위해 PM의 주행 분석 장치의 제작한다. 이를 위해 주행 분석 장치와 장치에서 수집된 데이터를 클라우드 서버를 통해 처리하는 시스템을 구성했으며, 이 시스템을 통해 PM의 운전상황에서 운전 중 발생할 수 있는 특수한 상황(가/감속, 과속방지턱 통과)을 인식하고 기록하고자 한다. 그 결과 장치 내 측정 센서(IMU)에서 수집한 각속도, 가속도, 지자기 값을 통해 운행 여부 및 인도 주행 여부, 경사로 주행 여부를 판단해 낼 수 있었다. 이 기술은 기존의 영상기반 기록장치보다 약 1600배 이상의 주행 정보 저장 효율을 달성할 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권3호
• /
• pp.21-25
• /
• 2014

As wireless power transfer (WPT) technology using strongly coupled electromagnetic resonators is a recently explored technique to realize the large power delivery and storage without any cable or wire, this technique is required for diffusion of electric vehicles (EVs) since it makes possible a convenient charging system. Typically, since the normal conducting coils are used as a transmitting coil in the CPT system, there is limited to deliver the large power promptly in the contactless EV charging system. From this reason, we proposed the combination CPT technology with HTS transmitting antenna, it is called as, superconducting contactless power transfer for EV (SUWPT4EV) system. As the HTS coil has an enough current density, it can deliver a mass amount of electric energy in spite of a small scale antenna. The SUCPT4EV system has been expected as a noble option to improve the transfer efficiency of large electric power. Such a system consists of two resonator coils; HTS transmitting antenna (Tx) coil and normal conducting receiver (Rx) coil. Especially, the impedance matching for each resonator is a sensitive and plays an important role to improve transfer efficiency as well as delivery distance. In this study, we examined the improvement of transmission efficiency and properties for HTS and copper antennas, respectively, within 45 cm distance. Thus, we obtained improved transfer efficiency with HTS antenna over 15% compared with copper antenna. In addition, we achieved effective impedance matching conditions between HTS antenna and copper receiver at radio frequency (RF) power of 370 kHz.

• 정보처리학회논문지A
• /
• 제8A권4호
• /
• pp.287-292
• /
• 2001

멀티미디어 서버 시스템은 고용량이어야 하며 지속적으로 늘어나는 사용자수 뿐만 아니라 추가되는 새로운 저장 공간에 대한 우수한 확장성을 제공하여야 하는 것이 필수적이다. 일반적인 스트리밍 서비스의 경우, 사용자들은 시비스 초기의 지연시간에 어느 정도 관대한 편이지만 고풍질의 서비스를 요구한다. 스트림 서버는 동영상을 사용자에게 전달할 때 데이터 저장공간으로부터 실시간으로 전송하여야 한다. 그러나 현재의 범용 서버 시스템은 이러한 요구사항을 충분히 반영하지 못할 뿐만 이니라 늘어나는 사용자 부하와 시스템 요구에 대한 고려, 그리고 미디어 데이터에 대한 반영이 이루어지지 못하여 점차 증가되는 사용자의 고화질 미디어 서비스 요구 사항을 충족시키지 못하고 있다. 본 논문에서는 리녹스를 기반으로 구현한 실시간 스트림 서버 시스템의 확장성 있는 구조가 고 대역폭 고화질 On-Demand 서버로서 효율적인 대안임을 보이며, 또한 QoS 요구 보장과 효율적인 시스템 관리 정책을 제시하여 범용 서버를 멀티미디어 저장 및 스트리밍에 적합한 환경의 클러스터로 구성하는 방법을 제시한다. 이 시스템의 특징은 서비스하고자 하는 파일들을 각 병별 저장 시스템에 쪼개어 저장하는 시스템 RAID 기술을 사 용하여 사용자 요구시 동시에 데이터를 전송하여 줌으로써 단일 미디어 서버보다 훨씬 우수한 성공을 발휘한다.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.295-301
• /
• 2013

Long-term global energy-demand growth is expected to increase driven by strong energy-demand growth from developing countries. Fusion power offers the prospect of an almost inexhaustible source of energy for future generations, even though it also presents so far insurmountable scientific and engineering challenges. One of the challenges is safe handling of hydrogen isotopes. Metal hydrides such as depleted uranium hydride or ZrCo hydride are used as a storage medium for hydrogen isotopes reversibly. The metal hydrides bind with hydrogen very strongly. In this paper, we carried out a modeling and simulation work for absorption/desorption of hydrogen by ZrCo in a horizontal annulus cylinder bed. A comprehensive mathematical description of a metal hydride hydrogen storage vessel was developed. This model was calibrated against experimental data obtained from our experimental system containing ZrCo metal hydride. The model was capable of predicting the performance of the bed for not only both the storage and delivery processes but also heat transfer operations. This model should thus be very useful for the design and development of the next generation of metal hydride hydrogen isotope storage systems.

• Macromolecular Research
• /
• 제17권3호
• /
• pp.156-162
• /
• 2009

Supramolecular hydrogels were instantaneously fabricated by mixing aqueous solutions of $\alpha$-cyclodextrins ($\alpha$-CDs) and amphiphilic methoxy (polyethylene glycol) (MPEG)-$\varepsilon$-caprolactone (CL) oligomer, which was synthesized via the ring-opening polymerization of the CL monomer using low-molecular-weight MPEG ($M_n$ of MPEG=2,000 g/mol) as an initiator. The supramolecular structure of the hydrogels was revealed by X-ray diffraction (XRD) analyses. Rheological studies of the hydrogels revealed an elastic character when the number of CL units in the oligomer was more than 2, and the obtained hydrogels showed high storage modulus but relatively low shearing viscosity due to the low-molecular-weight character of the oligomer, which was more preferable for use as an injectable delivery system. The physical properties of the hydrogels could be modulated by controlling the chain morphology and concentration of the oligomers, as well as the feed molar ratio of the oligomer to $\alpha$-CD. The components of the supramolecular hydrogels are biocompatible and can readily be eliminated from the body. These features render the supramolecular hydro gels suitable as drug delivery systems and tissue engineering scaffolds.

• 산업경영시스템학회지
• /
• 제45권4호
• /
• pp.134-141
• /
• 2022

Transportation in urban area has been getting hard to fulfill the demand on time. There are various uncertainties and obstacles related with road conditions, traffic congestions, and accidents to interrupt the on-time deliveries. With this situation, the last mile logistics has been a keen issue for researchers and practitioners to find the best strategy of the problem. A way to resolve the problem is to use parcel lockers. Parcel locker is a storage that customers can pick up their products. Transportation vehicles deliver the products to parcel lockers instead of all customer sites. Using the parcel lockers, the total delivery costs can be reduced. However, the inconvenience of customer has to increase. Thus, we have to optimal solution to balance between the total delivery costs and customers' inconvenience. This paper formulates a mathematical model to find the optimal solution for the vehicle routing problem and the location problem of parcel lockers. Experimental results provide the viability to find optimal strategy for the routing problem as well as the location problem.