• 한국컴퓨터정보학회논문지
• /
• 제11권2호
• /
• pp.145-151
• /
• 2006

IT기술의 급속한 발전과 함께 데이터의 증가 양이 양산되고 있다. 새로운 데이터양은 매우 커지고 있으며, 유비쿼터스 환경에서 필요되는 센서 장치 혹은 클라이언트 장치들로부터 생성된 새로운 데이터 형태는 매우 다양하여 데이터들을 관리하고 제어하기가 어렵다. 특히, 유비쿼터스 환경에서 발생된 데이터는 PDA, 스마트 폰, 모바일 장치 혹은 센서 장치 등 다양한 원천 소스 등을 통해 생성된다. 그러므로 의사결정을 위해 유비쿼터스 장치로부터 생성된 데이터를 관리하고 제어하기 위해서 통합된 저장 장소로 데이터 웨어하우스를 사용한다. 데이터 웨어하우스는 서로 다른 몇몇 DBMS 데이터를 하나의 DBMS로 통합하고 집단화한다. 또한, 소스 데이터로부터 갱신된 데이터는 효과적으로 데이터 웨어하우스로 전파되어야 한다. 그러므로 본 연구에서는 새로운 IT패러다임 환경인 유비쿼터스 컴퓨팅 환경에서 정확하고 효율적인 데이터 관리 방법론을 위한 모델을 제시한다. 또한 갱신된 데이터를 의사 결정을 위해 활용할 수 있으며, 기존 방법론과 비교하여 분석 결과를 보인다.

• Journal of Applied Biological Chemistry
• /
• 제59권4호
• /
• pp.299-304
• /
• 2016

PCR 산물을 이용한 시퀀싱방법 중 Illumina 플랫폼으로 시퀀싱을 수행하면 100개 이상의 인위적인 시퀀스가 생겨나며, 그러한 인위적으로 형성되는 시퀀스에 의해 Operational taxonomic units를 기반으로 한 미생물생태 변화 및 네트워크 분석에 영향을 미친다. 이러한 문제점이 있음에도 불구하고 분변미생물생태를 분석하는데 Illumina에서 제공하고 있는 시퀀싱을 주된 방법으로 사용하고 있으며, 또한 그러한 시퀀스 기반의 분변미생물 생태분석 결과는 분변샘플상태(i.e., 분변 보관 기간, 분변양, 분변의 신선도)에 따라 상이하게 나타난다. 본 연구에서는 분변샘플의 동결건조가 시퀀스 데이터의 퀄리티를 향상시키는지 관해 조사하였으며, 이를 통해 분변샘플에 동결건조처리는 전체적인 미생물생태구조를 변화시키지는 않지만 인위적으로 형성되었을 가능성이 있는 시퀀스의 수를 감소시키는 것으로 확인되었다. 따라서, 분변으로부터 DNA를 추출하기 이전에 동결건조처리하는 방법을 Illumina 기반의 분변미생물생태분석에 사용하는 것을 권장한다.

• Journal of Microbiology and Biotechnology
• /
• 제27권2호
• /
• pp.219-225
• /
• 2017

An aqueous chlorine dioxide ($ClO_2$) treatment combined with highly activated calcium oxide (CaO) and mild heat was tested for inactivating naturally existing bacteria and Escherichia coli O157:H7 inoculated on fresh-cut kale. Kale samples were treated with different concentrations of $ClO_2$ (10, 30, and 50 ppm), CaO (0.01%, 0.05%, 0.1%, and 0.2%), and mild heat ($25^{\circ}C$, $45^{\circ}C$, $55^{\circ}C$, and $65^{\circ}C$) as well with combinations of 30 or 50 ppm $ClO_2$ and 0.2% CaO at $55^{\circ}C$ for 3 min. An increasing concentration of $ClO_2$ and CaO significantly reduced the microbial population compared with the control. In addition, mild heating at $55^{\circ}C$ elicited greater microbial reduction than the other temperatures. A combined treatment of 50 ppm $ClO_2$ and 0.2% CaO at $55^{\circ}C$ reduced the population of naturally existing bacteria on kale by 3.10 log colony forming units (CFU)/g, and the counts of E. coli O157:H7 were below the detection limit (1 log CFU/g). In addition, no significant differences in the Hunter color values were evident in any treatment during storage. Therefore, a combined treatment of $ClO_2$ and active CaO at $55^{\circ}C$ can be an effective sanitizing method to improve the microbiological safety of fresh-cut kale without affecting its quality.

• 설비공학논문집
• /
• 제20권7호
• /
• pp.492-499
• /
• 2008

The cooling load in winter is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, the performance of a multi-heat pump with 3-piping system was investigated as a function of refrigerant charge and its performance was analyzed in cooling mode, heating mode, and heat recovery mode. COP in the heating or cooling mode showed little dependence on refrigerant charge at overcharge conditions, while those were strongly dependent on refrigerant charge at undercharge conditions and outdoor inlet temperature. In the heat recovery mode, the performance of the system was very sensitive to charge amount at all conditions. Optimum charge amount in the heat recovery mode was 14% lower than that in the cooling mode at the standard condition because the refrigerant only passed the indoor units. It is required to store the excessive refrigerant charge in a storage tank to optimize the system performance at operating modes.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권5호
• /
• pp.201-205
• /
• 2003

We synthesized dendrimers containing light switchable units, azobenzene group. And the dendrimer containing 48 pyridinepropanol functional end group, which could form a complex structure with metal ions was synthesized. To apply to the molecular level devices or data storage system using Langmuir-Blodgett(LB) film, we firstly investigated the monolayer behavior using the surface pressure-area($\pi$-A) isotherms at air-water interface. And then the surface pressure shift of monolayer by light irradiation was also measured to the dendrimer with azobezene group. As a result, the monolayer of dendrimer with azobenzene group showed the reversible photo-switching behavior by the isomerization of azobenzene group in their periphery. The samples for electrical measurement were fabricated to two types which were pure dendrimer with pyridinepropanol group and its complexes with $Pt^4+$ ions by LB method. We have studied the electrical properties of the ultra thin dendrimer LB films investigated by the current-voltage(I-V) characteristics of Metal/Dendrimer LB films/Metal(MIM) structure. And we have investigated different results in the surface activity at the air-water interface as well as the electrical properties for the monolayers of pure dendrimer with pyridinevopanol group and its complex with $Pt^4+$ ions. In conclusion, it is demonstrated that the metal ion around dendrimer with pyri야nepropanol group can contribute to make formation of network structure among dendrimers and it result from the change of electrical properties. This results suggest that the dendrimers with azobenzene group and pvridinedropanol group can be applied to high efficient nano-device of molecular level.

• Journal of Information Processing Systems
• /
• 제10권1호
• /
• pp.103-118
• /
• 2014

Over the last couple of years, traditional VANET (Vehicular Ad Hoc NETwork) evolved into VANET-based clouds. From the VANET standpoint, applications became richer by virtue of the boom in automotive telematics and infotainment technologies. Nevertheless, the research community and industries are concerned about the under-utilization of rich computation, communication, and storage resources in middle and high-end vehicles. This phenomenon became the driving force for the birth of VANET-based clouds. In this paper, we envision a novel application layer of VANET-based clouds based on the cooperation of the moving cars on the road, called CaaS (Cooperation as a Service). CaaS is divided into TIaaS (Traffic Information as a Service), WaaS (Warning as a Service), and IfaaS (Infotainment as a Service). Note, however, that this work focuses only on TIaaS and WaaS. TIaaS provides vehicular nodes, more precisely subscribers, with the fine-grained traffic information constructed by CDM (Cloud Decision Module) as a result of the cooperation of the vehicles on the roads in the form of mobility vectors. On the other hand, WaaS provides subscribers with potential warning messages in case of hazard situations on the road. Communication between the cloud infrastructure and the vehicles is done through GTs (Gateway Terminals), whereas GTs are physically realized through RSUs (Road-Side Units) and vehicles with 4G Internet access. These GTs forward the coarse-grained cooperation from vehicles to cloud and fine-grained traffic information and warnings from cloud to vehicles (subscribers) in a secure, privacy-aware fashion. In our proposed scheme, privacy is conditionally preserved wherein the location and the identity of the cooperators are preserved by leveraging the modified location-based encryption and, in case of any dispute, the node is subject to revocation. To the best of our knowledge, our proposed scheme is the first effort to offshore the extended traffic view construction function and warning messages dissemination function to the cloud.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제2권2호
• /
• pp.59-66
• /
• 2013

본 논문에서는 임베디드 시스템에서 DSP를 위한 메모리 접근 변수의 저장 방법에 대한 최적화 ILP 알고리즘을 제안하였다. 본 논문은 0-1 ILP 공식을 이용하여 DSP 주소 생성 유닛의 메모리 변수 데이터 레이아웃을 최소화한다. 제약 조건을 기반으로 변수의 메모리 할당 여부를 식별하고, 변수가 지시하는 주소코드를 프로그램 포인터에 등록한다. 프로그램의 처리 순서가 프로그램 포인터에 선언되면, 해당 변수의 주소코드에 대한 자동증감 모드를 적용한다. 주소 레지스터에 대한 로드를 최소화하여 변수의 데이터 레이아웃을 최적화한다. 본 논문에서 제안한 알고리즘의 효율성을 입증하기 위하여 FICO Xpress-MP Modeling Tools을 이용하여 벤치마크에 적용하였다. 벤치마크 적용 결과, 기존의 선언적 주문 메모리 레이아웃보다 제안한 알고리즘을 적용한 최적의 메모리 레이아웃이 주소/수정 레지스터에 대한 로드 수를 감소시켰고, 주소코드의 접근을 줄임으로써, 프로그램의 실행 시간을 단축시켰다.

• 한국실내디자인학회논문집
• /
• 제25권3호
• /
• pp.70-81
• /
• 2016

Nowadays the preschool children spend much of the day playing indoors. Therefore, it needs the indoor environment that helps a variety of fun activities and physical development, and it requires the space configuration and playable furniture considering the emotional development for mental health. However, the furniture for fast growing preschoolers has not various types because the domestic furniture market for children is mostly baby beds and the furniture for the education of children. Therefore, this study presents the concepts and types of the playable furniture reflecting emotional design for preschool children's healthy emotion and suggests the most appropriate type of playable furniture considering play behavior by age. In this study, we investigated the physical, cognitive, social, emotional and linguistic development characteristics and play behavior of preschoolers, and derived the right type of playground equipment and furniture, and examined the types of playable furniture to help the emotional development. We derived the items to be checked for developing the playable furniture by age for emotional development, and classified preschoolers' playable furniture into the use of learning, relaxation and storage, and suggested its basic type focusing on the cases of various playable furniture developed at home and abroad. As a result, the playable furniture was divided into three types. The first is the self-play type making possible self amusement, the second is module built-up-type that consists of furniture and modules or units and creates various patterns and can be modified through the self-assembly and disassembly, and the third is IT game type grafting IT skills and a variety of electronic games to furniture. We sorted these types into three classes (1-3 years old, 4-5, 6-7) according to age and presented the type of play for each age, the play element and representative image that can be introduced to this furniture. In this study, we provided the basic design types of age-specific emotional playable furniture by analyzing these results.

• 한국실내디자인학회논문집
• /
• 제19권1호
• /
• pp.217-225
• /
• 2010

As life quality have grown today, People have been greatly interested in health. Moreover, new knowledge and concepts are being applied in the medical facility field and that makes the field expand constantly. Hereby, this research is a study on design elements of dental clinics and the research goals are to understand interior design of current dental clinics by investigation and analysis on furniture, closing materials, colors and so on, and to investigate esthetic and functional environments for dental clinics through analyzing upcoming trends of inner spaces of dental clinics. The investigation was conducted by visits to four clinics per each research area, where are in Busan area and opened after year 2000 and are located in Seoul and Busan. Though the spaces of dental clinics vary according to the characteristics of each clinic, it generally has a consultation room, a waiting room and an X-ray room. The closing materials that make patients feel at ease are used in the waiting room, and ones that make patients feel tidy and fresh are used in consultation spaces, spare spaces, and management spaces. In Seoul area, antique and harmonic colors are used, and modernistic colors are used in Busan area. Reception desks, chair units, sofas and sink storage shelfs are the common furniture in the clinic. We have learned what are mentioned above by research and investigation on the component characteristics of dental clinic spaces. Based on these, more systematical and in-depth research should be continued.

• 융합신호처리학회논문지
• /
• 제4권3호
• /
• pp.34-40
• /
• 2003

본 논문에서는 비디오 장면전환 효과 중 디졸브(dissolve)에 의한 점진적인 장면전환 구간을 검출하는 알고리즘을 제안한다. 제안한 알고리즘은 처리의 효율성과 MPEG Sequence의 최소한의 복원과정을 위해 Ⅰ, P 프레임의 Color-R값에 대한 DCT계수를 사용하였다. 인간의 시각으로는 비디오의 장면전환점을 쉽게 구분해 낼수 있듯이 컴퓨터가 인식하기 쉽도록 영상을 3차원으로 시각화하고 분석하여 장면전환 구간을 검출하였다. 우선 각각의 영상에서 Color-R에 대한 DCT계수를 추출하고 블록단위인 8＊8단위 열의 합을 구해 다시 프레임에 대한 행을 4단계로 분할하여 특징치를 분석하고 4단계의 샷 특징치를 통합하여 샷을 검출한다. 실험결과 제안한 방법이 영상의 단일 특징치를 사용한 방법보다 4단계의 특징치 분석을 사용함으로서 더 좋은 성능을 나타내었다 또한 Ⅰ, P 프레임의 Color-R값의 부분적 복원과정으로 계산시간을 절약할 수 있었다.