컨테이너 물동량 증가와 컨테이너선의 대형화에 따라서 항만 하역장비는 지속적으로 변화하고 있다. 본 연구는 항만 하역장비 가운데 컨테이너크레인의 기계적 생산성을 상세히 평가하기 위해 개발된 시뮬레이션 모델을 소개한다. 모델은 컨테이너크레인의 메커니즘으로 싱글 및 듀얼 트롤리 방식을, 스프레더 유형으로 싱글, 트윈, 탠덤 방식을 고려하고 컨테이너크레인의 규모와 속도 등에 관련된 세부 사양을 입력받아 기구학적 특성을 구현한다. 또한 외부의 물리적 제약으로 선박의 크기, 컨테이너의 적재위치와 무게를 고려한다. 본 모델은 다양한 입력변수가 파라미터 (parameter)로 분리되어 실험 조건을 편리하게 설정할 수 있으며, 객체 지향적으로 설계 개발되어 향후 새롭게 개발되는 장비 유형이나 기존 장비의 변화를 유연하게 수용할 수 있다.
자동차 진단 데이터의 양이 증가함에 따라 자동차 에코시스템의 액터는 스마트 자동차에서 수집된 데이터에 따라 새로운 서비스를 시뮬레이션 하거나 설계하기 위하여 실시간으로 분석을 해야 하는 어려움에 직면하게 된다. 본 논문에서는 자동차에서 생성된 막대한 양의 자동차 내장 진단 데이터를 처리하고 분석하는데 필수적이고 심오한 해석학을 제시하는 빅 데이터 솔루션에 관한 연구를 하였다. Hadoop 및 그 에코시스템은 자동차 소유자에 대한 새로운 서비스 제공을 위해 자동차 에코시스템의 액터에 의해 사용될 수 있는 막대한 데이터 및 전달된 유용한 결과를 처리하기 위해 개발된 것이다. 지능형 교통시스템이 안전성 보장, 속도로 인한 사고로 입는 상해 및 충돌의 비율 감소 등에 관여함에 따라, 자동차 진단 데이터 기반의 빅 데이터 솔루션 개발을 통해 향후 실시간 결과 감시, 여러 스마트 자동차에서의 데이터 수집, 수집된 데이터에 대한 신뢰성 있는 처리 및 용이한 저장을 실현화하게 된다.
리튬이온 배터리는 낮은 자체 방전율 특성과 고밀도 에너지 저장장치로 다양하게 응용되고 있으며, 단위 셀 배터리의 전압은 4V 보다 낮아, 직렬로 연결하여 사용해야 하는 것이 일반적이다. 배터리 셀전압의 직렬 연결 동작시, 각각의 단위 셀 배터리는 내부저항이 균일하지 않아, 충전 시, 특정 단위 셀 배터리는 4V 이상이 걸려, 폭발이 발생할 수도 있으며, 또한, 방전 시 배터리의 특성을 떨어뜨릴 수 있는 한계 전압 이하가 되는 심각한 문제가 존재한다. 따라서, 단위 셀 배터리의 충전 및 방전 동작에서는 과충전과 과방전을 사전에 감지하기 위한 전압 센싱 동작이 필요하며, 이에, 본 논문에서는 고속 배터리 전압 센싱 모듈 개발을 소개한다. 제작된 CVM(Cell Voltage Monitoring)은 단위 배터리 셀을 통하여, 전압 및 온도 채널 포함하여, 12채널을 모니터링할 수 있으며, 채널당 12-bits 분해능과 192 kbps 전송 속도를 가진다.
제자리 덮어쓰기가 불가능하고 블록의 지움 횟수가 제한되는 낸드 플래시 메모리를 저장매체로 사용하기 위해서 지움 횟수 평준화를 지원하는 다양한 가비지 컬렉션 정책들이 연구되고 있다. 기존정책들은 지움 횟수 평준화를 지원하기 위해 가비지 컬렉션이 수행될 때마다 전체 블록에 대해 지움 대상블록을 선정하기 위한 클리닉 지표를 구하는 연산을 수행하여야 하고 이 연산들은 시스템의 성능을 저하시킨다. 본 논문에서 제안하는 가비지 컬렉션 정책은 지움 횟수의 분산(variance)과 블록들의 최대 지움횟수에 따라 변경되는 임계값을 이용하여 전체 블록에 대한 클리닉 지표를 구하는 연산을 수행하지 않으면서 지움 횟수 평준화를 제공한다. 가비지 컬렉션 시 분산이 임계값 보다 작을 때는 Greedy 정책을 이용하여 지움 비용을 최소화하고, 분산이 임계값 보다 클 때는 최대 지움 횟수를 가진 블록을 지움 대상에서 제외하여 지움 횟수를 평준화한다. 본 논문에서 제안하는 방법으로 가비지 컬렉션을 수행하였을 때, 블록들의 지움 횟수가 지움 횟수 상한에 가까워질수록 블록들의 지움 횟수 표준 편차가 0에 근접하며, 기존의 지움 횟수 평준화를 지원하는 알고리즘과 비교하여 두 배 이상 빠른 가비지 컬렉션 속도를 보였다.
A mathematical model is used to investigate nitrogen dynamics in the intensive aquaculture ponds in the western coast of Korea. Parameters associated with water quality, sediments and growing of shrimp (Fenneropenaeus chinensis) are measured to calibrate the model for feeding ponds A and B and storage ponds. The model describes the fate of nitrogen including loadings of ammonia from feeds, phytoplankton assimilation, nitrification, sedimentation, volatilization and discharge. The model obtains good agreements with the measured values of TAN $(NH_4,\;NH_3),\;NO(NO_2,\;NO_3)$ and Chl (chlorophyll a). Impacts of water exchange on TAN and Chl are investigated, showing that the range of 0.01-0.2 (/day) cannot effectively reduce TAN but reduces Chl. Nitrogen in the ponds A is removed by sedimentation $66\%,$ volatilization $8\%,$ discharge of particulate and dissolved $8\%.$ The pond B shows $56\%\;and\;26\%$ of sedimentation and volatilization, respectively, to yield $10\%.$ decrease and 8c/o increase compared to those in the pond A. While the pond A has larger area (1.02:0.66 ha) and same stocking density (0.025 md./L) at the beginning of culture, the pond B obtains higher stocking density (0.0065:0.0091 md./L), longer feeding period (103:121 day) and resultant higher shrimp production (1.15:2.13 t/ha/cycle) at harvest. This is possibly due to the hydraulic characteristics driven by paddlewheels. At low ratio of the low speed area and the pond area, the rate of sedimentation is high, while the rate of gas exchange is low. Thus, the measurement and model analysis suggest that water quality and shrimp production are positively correlated with the hydraulic characteristics in the shrimp ponds.
본 논문은 0.6㎛ CMOS 기술로 LZSS 알고리즘과 엔트로피 부호를 이용한 부호기/복호기 단일-칩의 본 논문은 0.6uul CMOS 기술로 LZSS 알고리즘과 엔트로피 부호를 이용한 부호기/복호기 단일-칩의 VLSI 설계 및 구현에 관하여 기술하였다. 처리 속도 50MHz를 갖는 사전탐색처리장치(DISP)의 메모리는 2K×Bbit 크기를 사용하였다. 이것은 매번 33개 클럭 중 한 개의 클럭은 사전의 WINDOW 배열을 갱신으로 사용하고 나머지 클럭은 주기마다 한 개의 데이터 기호를 바이트 단위로 압축을 실행한다. 결과적으로, LZSS 부호어 출력에 엔트로피 부호를 적용하여 46%의 평균 압축률을 보였다. 이것은 LZSS에 보다 7% 정도의 압축 성능이 향상된 것이다.
Purpose: The aims of the present study are to determine the optimum compression rate in terms of file size reduction and diagnostic quality of the images after compression and evaluate the transmission speed of original or each compressed image. Materials and Methods: The material consisted of 24 extracted human premolars and molars. The occlusal surfaces and proximal surfaces of the teeth had a clinical disease spectrum that ranged from sound to varying degrees of fissure discoloration and cavitation. The images from Digora system were exported in TIFF and the images from conventional intraoral film were scanned and digitalized in TIFF by Nikon SF-200 scanner (Nikon, Japan). And six compression factors were chosen and applied on the basis of the results from a pilot study. The total number of images to be assessed were 336. Three radiologists assessed the occlusal and proximal surfaces of the teeth with 5-rank scale. Finally diagnosed as either sound or carious lesion by one expert oral pathologist. And sensitivity, specificity and k value for diagnostic agreement was calculated. Also the area (Az) values under the ROC curve were calculated and paired t-test and oneway ANOVA test was performed. Thereafter, transmission time of the image files of the each compression level was compared with that of the original image files. Results: No significant difference was found between original and the corresponding images up to 7% (1 : 14) compression ratio for both the occlusal and proximal caries (p<0.05). JPEG3 (1 : 14) image files are transmitted fast more than 10 times, maintained diagnostic information in image, compared with original image files. Conclusion: 1 : 14 compressed image file may be used instead of the original image and reduce storage needs and transmission time.
International Journal of Internet, Broadcasting and Communication
/
제9권4호
/
pp.38-43
/
2017
Sensor Networks (WSNs) can be defined as a self-configured and infrastructure-less wireless networks to monitor physical or environmental conditions, such as temperature, sound, vibration, pressure, motion or pollutants and to cooperatively pass their data through the network to a main location or base-station where the data can be observed and analyzed. Typically a wireless sensor network contains hundreds of thousands of sensor nodes. The sensor nodes can communicate among themselves using radio signals. A wireless sensor node is equipped with sensing and computing devices, radio transceivers and power components. The individual nodes in a wireless sensor network (WSN) are inherently resource constrained: they have limited processing speed, storage capacity, communication bandwidth and limited-battery power. At present time, most of the research on WSNs has concentrated on the design of energy- and computationally efficient algorithms and protocols In order to extend the network life-time, in this paper we are looking into a routing protocol, especially LEACH and LEACH-related protocol. LEACH protocol is a representative routing protocol and improves overall network energy efficiency by allowing all nodes to be selected to the cluster head evenly once in a periodic manner. In LEACH, in case of movement of sensor nodes, there is a problem that the data transmission success rate decreases. In order to overcome LEACH's nodes movements, LEACH-Mobile protocol had proposed. But energy consumption increased because it consumes more energy to recognize which nodes moves and re-transfer data. In this paper we propose the new routing protocol considering nodes' mobility. In order to simulate the proposed protocol, we make a scenario, nodes' movements randomly and compared with the LEACH-Mobile protocol.
Li$[Ni_{1/2}Co_{1/2}]O_2$ powder were synthesized from co-precipitation spherical metal oxide, $[Ni_{1/2}Co_{1/2}](OH)_2$. The preparation of metal hydroxide was significantly dependent on synthetic conditions, such as pH, amount of chelating agent, stirring speed, etc. The optimized condition resulted in $[Ni_{1/2}Co_{1/2}](OH)_2$, of which the particle size distribution was uniform and the particle shape was spherical, as observed by scanning electron microscopy. Calcination of the uniform metal hydroxide with LiOH at higher temperature led to a well-ordered layer-structured Li$[Ni_{1/2}Co_{1/2}]O_2$, as confirmed by X-ray diffraction pattern. Also these materials have ${\alpha}-NaFeO_2$ ($R\bar{3}m$) structure. Due to the homogeneity of the metal hydroxide, $[Ni_{1/2}Co_{1/2}](OH)_2$, the final product, Li$[Ni_{1/2}Co_{1/2}]O_2$, was also significantly uniform, i.e., the average particle size was of about 10 to 15 ${\mu}m$ in diameter and the distribution was relatively narrow. As a result, the corresponding tap-density was also high approximately 2.41 $gcm^{-3}$, of which the value is comparable to that of commercialized $LiCoO_2$.
최근 레이저를 이용하여 환원된 친환경 그래핀 패턴 기술(Laser Induced Graphene, LIG)은 간단하고 효율적으로 원하는 형태로 다양한 기판 위에 패터닝하는 것이 가능하여 신축 유연 전자 소자, 박막 형태의 에너지 저장 소자 등과 같이 새로운 친환경 전자 소자 제작에 많이 활용되고 있다. 이러한 그래핀 패턴 구조를 이용한 전자 소자의 성능과 효용성을 높이기 위해서는 그래핀 고유의 2차원 특성을 유지하면서 가능한 최소한의 선폭을 구현할 수 있는 최적화된 레이저 패터닝 조건에 대한 연구가 필수적이다. 본 논문에서는 최근 레이저 그래핀 패턴 연구에서 많이 사용되는 Ti:sapphire 펨토초 레이저를 이용해서 그래핀 광-열 산화반응을 분석하여 최적화된 그래핀의 최소선폭을 구현하였다. 레이저 에너지의 확산 효과를 최소화하기 위하여 레이저 광강도와 레이저 스캔 속도를 조절하여 최적의 그래핀 특성을 나타내는 패턴을 연구하였으며 18 ㎛의 집속된 빔을 이용하여 최소 30 ㎛의 이차원 그래핀 선폭을 구현하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.