• 제목/요약/키워드: Storage Model

검색결과 2,596건 처리시간 0.025초

배터리 에너지 저장 장치를 위한 2단 DC-DC-AC 컨버터의 모델링 방법 (Modeling and Control of a Two-Stage DC-DC-AC Converter for Battery Energy Storage System)

  • 현동엽;정석언;현동석
    • 전력전자학회논문지
    • /
    • 제19권5호
    • /
    • pp.422-430
    • /
    • 2014
  • This study proposes a small-signal model and control design for a two-stage DC-DC-AC converter to investigate its dynamic characteristics in relation to battery energy storage system. When the circuit analysis of the two-stage DC-DC-AC converter is attempted simultaneously, the mathematical procedure of deriving the dynamic equation is complex and difficult. The main idea of modeling the two-stage DC-DC-AC converter states that this topology is separated into a bidirectional DC-DC converter and a single-phase inverter with an equivalent current source corresponding to that of the inverter or converter. The dynamic equations for the separated converter and inverter are then derived using the state-space averaging technique. The procedures of building the small-signal model of the two-stage DC-DC-AC converter are described in detail. Based on the derived small-signal model, the individual controllers are designed through a frequency-domain analysis. The simulation and experimental results verify the validity of the proposed modeling approach and controller design.

우육지방질의 산화에 미치는 김치의 항산화작용에 관한 연구 (Antioxidative Effect of Kimchi on the Lipid Oxidation of Cooked Meat)

  • 최홍식;이영옥
    • 한국식품영양과학회지
    • /
    • 제24권6호
    • /
    • pp.1005-1009
    • /
    • 1995
  • This study was carried out to investigate the antioxidative effect of kimchi on the lipid oxidation of cooked meat in model systems. Four model systems of cooked ground meat(CGM). CGM-water(W), CGM-brine(B) and CGM-kimchi(K) were prepared and their oxidation behaviours were evaluated during the storage at 4$^{\circ}C$ for 5 weeks. Thiobarbituric acid values and peroxide values of the systems of CGM, CGM-B and CGM-W increased significantly with the storage time, however, those values of CGM-K were hardly changed during the time of 5 weeks storage. Antioxidative effect of CGM-K increased with the addition level of kimchi in system. And also in the model systems which were prepared with cooked ground meat and kimchi whose fermentation period is different, the antioxidative effect of well ripened and properly fermented kimchi was higher than that of unripened kimchi during the lipid oxidation process of model systems. These results suggested that kimchi especially the properly femented kimchi in the systems plays an important roles as an antioxidative activity on the lipid oxidation of cooked ground meat.

  • PDF

A software tool for integrated risk assessment of spent fuel transportation and storage

  • Yun, Mirae;Christian, Robby;Kim, Bo Gyung;Almomani, Belal;Ham, Jaehyun;Lee, Sanghoon;Kang, Hyun Gook
    • Nuclear Engineering and Technology
    • /
    • 제49권4호
    • /
    • pp.721-733
    • /
    • 2017
  • When temporary spent fuel storage pools at nuclear power plants reach their capacity limit, the spent fuel must be moved to an alternative storage facility. However, radioactive materials must be handled and stored carefully to avoid severe consequences to the environment. In this study, the risks of three potential accident scenarios (i.e., maritime transportation, an aircraft crashing into an interim storage facility, and on-site transportation) associated with the spent fuel transportation process were analyzed using a probabilistic approach. For each scenario, the probabilities and the consequences were calculated separately to assess the risks: the probabilities were calculated using existing data and statistical models, and the consequences were calculated using computation models. Risk assessment software was developed to conveniently integrate the three scenarios. The risks were analyzed using the developed software according to the shipment route, building characteristics, and spent fuel handling environment. As a result of the risk analysis with varying accident conditions, transportation and storage strategies with relatively low risk were developed for regulators and licensees. The focus of this study was the risk assessment methodology; however, the applied model and input data have some uncertainties. Further research to reduce these uncertainties will improve the accuracy of this model.

기존 도시의 홍수저감을 위한 우수관거 배수용량 증대 및 지하 빗물저류조 설치효과 비교 분석 (Comparative Analysis of the Storm Sewer Expansion Methodology and Underground Rainwater Storage Tanks for Urban Flood Control)

  • 이호열;서규태;이택순
    • 한국물환경학회지
    • /
    • 제29권6호
    • /
    • pp.754-761
    • /
    • 2013
  • Urban floods are usually caused by the lack of drainage capacity. Hence, sewer capacity expansion methodology by replacing small pipes with bigger ones is primarily applied as a flood control measure. However, this approach is often unreasonable because of the costs and time involved. Thus, the installation of underground rainwater storage tanks with the two advantages of flood control and water conservation is proposed. This study compared the effectiveness of flood control by both the sewer expansion methodology and rainwater storage tanks using the Storm Water Management Model. Three cases were simulated in this study. The first case analyzed flood reduction by the storm sewer expansion methodology. The simulation results indicate that the overflow volume from manholes was reduced by 49% with this methodology. The second case analyzed flood reduction by installation of rainwater storage tanks. The simulation results indicate that the overflow volume was reduced by 62%. However, these two cases could not prevent urban floods completely. Hence, the third case analyzed the joint application of the storm sewer expansion methodology and rainwater storage tanks. In this simulation, flooding did not occur. Consequently, the results of this study clearly show that underground rainwater storage tanks are more effective for flood control than capacity expansion of storm sewer. Furthermore, the joint application of these two flood control measures is more effective than their separate application.

경사하강법을 이용한 낸드 플래시 메모리기반 저장 장치의 고효율 수명 예측 및 예외처리 방법 (High Efficiency Life Prediction and Exception Processing Method of NAND Flash Memory-based Storage using Gradient Descent Method)

  • 이현섭
    • 융합정보논문지
    • /
    • 제11권11호
    • /
    • pp.44-50
    • /
    • 2021
  • 최근 빅데이터를 수용하기 위한 대용량 저장 장치가 필요한 엔터프라이즈 저장 시스템에서는 비용과 크기 대비 직접도가 높은 대용량의 플래시 메모리 기반 저장 장치를 많이 사용하고 있다. 본 논문에서는 엔터프라이즈 대용량 저장 장치의 신뢰도와 이용성에 직접적인 영향을 주는 플래시 메모리 미디어의 수명을 극대화 하기 위해 경사하강법을 적용한 고효율 수명 예측 방법을 제안한다. 이를 위해 본 논문에서는 불량 발생 빈도를 학습하기 위한 메타 데이터를 저장하는 매트릭스의 구조를 제안하고 메타데이터를 이용한 비용 모델을 제안한다. 또한 학습된 범위를 벗어난 불량이 발생 했을 때 예외 상황에서의 수명 예측 정책을 제안한다. 마지막으로 시뮬레이션을 통해 본 논문에서 제안하는 방법이 이전까지 플래시 메모리의 수명 예측을 위해 사용되어 온 고정 횟수 기반 수명 예측 방법과 예비 블록의 남은 비율을 기반으로 하는 수명 예측 방법 대비 수명을 극대화 할 수 있음을 증명하여 우수성을 확인했다.

저류함수를 이용한 일단위 장기유출모의 모형 구축 (Long term Rainfall-Runoff Modeling Using Storage Function Method)

  • 성영두;정구열;신철균;박진혁
    • 한국수자원학회논문집
    • /
    • 제41권7호
    • /
    • pp.737-746
    • /
    • 2008
  • 강우-유출 및 저수지운영 모형의 최종 개발 목적은 가용한 관측자료를 이용하여 실무자가 하천의 유량예측 및 저수지운영 업무를 쉽고 정확하게 수행할 수 있도록 분석도구를 제공하는데 있다. 본 연구에서는 물관리 실무에서 홍수량 예측업무에 활용중인 단기 강우-유출 저류함수 모형을 확장하여 장기유출에 모의에 기여도가 높은 유효우량 및 침투량 산정기법을 개선하여 장기 유출분석이 가능하도록 저류함수기반의 장기 유출모형을 구축하였다. 개발된 모형의 적용가능성을 검토하기 위하여 낙동강 유역내 3개 댐유역(안동,합천,밀양)을 대상으로 연간 유출모의를 실시 하였으며, 현재 물관리 실무에서 장기유출모형으로 활용중인 SSARR모형과의 성능을 비교하였다. 수문곡선 비교 결과, SSARR 모형이 상대적으로 재현성 높은 결과를 보여주었지만, 본 연구에서 개발한 모형은 관측 가용한 자료만으로도 비교적 신뢰성 있는 장기유출모의가 가능하다는 점에서 향후 실무에서 유용하게 활용할 수 있을 것으로 사료된다.

선형 Model에 의한 소류역에 있어서의 무차원 단위도 유도에 관한 연구 (A study on the derivation of Dimensionless Unit Hydrographs by the Linear model in the small watersheds)

  • 이순혁;한중석
    • 한국농공학회지
    • /
    • 제23권3호
    • /
    • pp.78-87
    • /
    • 1981
  • This study was attempted to get dimensionless unit hydrograph by linear model which can be used to the estimation of flood for the development of Agricultural water resources and laid emphasis on the application of dimensionless unit hydrographs for the ungaged watersheds by applying linear model. The results summarized through this study are as follows. 1.Peak discharge is found to be Qp= CAR (C =0. 895A-o.145) having high significance between peak discharge, Qp and effective rainfall, R within the range of small watershed area, 84 to 470km2. consequently, linearity was acknowledged between rainfall and runoff. Reasonability is confirmed for the derivation of dimensionless unit hydrograph by linear model. 2.Through mathematical analysis, formula for the derivation of dimensionless unit hydrograph was derived. qp--p=(tp--t)n-1[e-(n-1)](tp--t-1) 3.Moment method was used for the evaluation of storage constant, K and shape parameter, n for the derivation of dimensionless unit hydrograph. Storage constant, K is more closely related with the such watershed characteristics as length of main stream and slopes. On the other hand, the shape parameter, n was derived with such watershed characteristics as watershed area, river length, centroid distance of the basin and slopes. 4.Time to peak discharge, Tp could be expressed as Tp=1. 25 (√s/L)0.76 having a high significance. 5.Dimensionless unit hydrographs by linear model stood more closely to the observe dimensionless unit hydrographs On the contrary, dimensionless unit hydrographs by S.C. S. method has much difference in comparison with linear model at the falling limb of hydrographs. 6.Relative errors in the q/qp at the point of 0.8 and 1.2 for the dimensionles ratio by linear model and S. C. S. method showed to be 2.41, 1.57 and 4.0, 3.19 percent respectively to the q/qp of observed dimensionless unit hydrographs. 7.Derivation of dimensionless unit hydrograph by linear model can be accomplished by linking the two empirical formulars for storage constant, K, and shape parameter, n with derivation formular for dimensionless unit hydrograph for the ungaged small watersheds.

  • PDF

A Fuzzy Multi-Objective Linear Programming Model: A Case Study of an LPG Distribution Network

  • Ozyoruk, Bahar;Donmez, Nilay
    • Industrial Engineering and Management Systems
    • /
    • 제13권3호
    • /
    • pp.319-329
    • /
    • 2014
  • Supply chain management is a subject that has an increasing importance due to the developments in the global markets and technology. In this paper, a fuzzy multi-objective linear programming model is developed for the supply chain of a company dealing with procurement, storage, filling, and distribution of liquefied petroleum gas (LPG) in Turkey. The model intends to determine the quantities of LPG to be procured, stored, filled to cylinders, and transported between the plants and demand centers for six planning periods. In this model, which aims to minimize both total costs (sum of procurement, storage, filling, and transportation costs) and total transportation distances, demand quantities of the main demand centers and decision maker's aspiration levels about objective functions are fuzzy. After comparing the results obtained from the model with those obtained by using different methods, it is concluded that the proposed method can be applied to real world problems practically and it may be used in this type of problems in order to generate an efficient solution.

A Review of Li-ion Battery Equivalent Circuit Models

  • Zhang, Xiaoqiang;Zhang, Weiping;Lei, Geyang
    • Transactions on Electrical and Electronic Materials
    • /
    • 제17권6호
    • /
    • pp.311-316
    • /
    • 2016
  • Batteries are critical components of electric vehicles and energy storage systems. The connection of a battery to the power grid for charge and discharge greatly affects energy storage. Therefore, an accurate and easy-to-observe battery model should be established to achieve systematic design, simulation, and SOC (state of charge) estimations. In this review, several equivalent circuit models of representative significance are explained, and their respective advantages and disadvantages are compared to determine and outline their reasonable applications to Li-ion batteries. Numerous commonly used model parameter identification principles are summarized as well, and basic model verification methods are briefly introduced for the convenient use of such models.

댐 군 월별 운영 정책의 도출을 위한 추계적 동적 계획 모형 (A Stochastic Dynamic Programming Model to Derive Monthly Operating Policy of a Multi-Reservoir System)

  • 임동규;김재희;김승권
    • 경영과학
    • /
    • 제29권1호
    • /
    • pp.1-14
    • /
    • 2012
  • The goal of the multi-reservoir operation planning is to provide an optimal release plan that maximize the reservoir storage and hydropower generation while minimizing the spillages. However, the reservoir operation is difficult due to the uncertainty associated with inflows. In order to consider the uncertain inflows in the reservoir operating problem, we present a Stochastic Dynamic Programming (SDP) model based on the markov decision process (MDP). The objective of the model is to maximize the expected value of the system performance that is the weighted sum of all expected objective values. With the SDP model, multi-reservoir operating rule can be derived, and it also generates the steady state probabilities of reservoir storage and inflow as output. We applied the model to the Geum-river basin in Korea and could generate a multi-reservoir monthly operating plan that can consider the uncertainty of inflow.