• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.35-46
• /
• 1998

The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.180-184
• /
• 2003

The intrauterine inseminator (IUI) was developed to provide the method of depositing dog semen into the uterine body instead of the vagina. The IUI consists of a vaginal endoscope, a balloon sheath, and injection catheter. When the endoscope is inserted into the vagina and the balloon expanded with air, the cervical os becomes visible so a injection catheter can be inserted through the cervix for deposition of the frozen-thawed semen. The efficacy of the IUI device was compared to intra-vaginal artificial insemination using semen that had been collected and frozen from pooled sperm-rich fraction of ejaculates collected from two Jindo dog donors. Aliquots of semen were extended with a Tris-egg yolk diluent, centrifuged, the seminal plasma removed, the pellet resuspended with the same diluent, and cooled to $5^{\circ}C$ over a 2 h period. A Tris-egg yolk-glycerol extender was added at $5^{\circ}C$; after 1 h, semen was loaded into 0.5 ml straws, and straws were frozen in LN vapor for 5 min, and immersed in LN for storage. The final sperm concentration for freezing was approximately $100{\times}10^{6}cells/ml$. The straws were thawed at $70^{\circ}C$ for precisely 6 sec, 1.5 ml Tris-egg yolk buffer at $38^{\circ}C$ added, and the 2 ml of thawed semen was used for a single insemination using the IUI device. Each bitch was inseminated at optimal insemination point, which was estimated by vaginal epithelial cells staining and progesterone concentration analysis. Use of the IUI device resulted in 21 of 26 females giving birth to 89 pups ($4.2{\pm}1.6$ pups per litter), while intra-vaginal AI resulted in 6 of 15 females whelping a total of 17 pups ($2.8{\pm}1.2$ pups per litter). We believe the IUI device is easier to use than previously described devices used for intrauterine insemination. In our experience the expansion of the balloon has a calming effect on the bitch that aids the inseminator. These results indicate that the IUI device was able to provide high fertility with 50 million frozen sperm per insemination and two inseminations.

• Korean Journal of Food Science and Technology
• /
• v.39 no.1
• /
• pp.20-24
• /
• 2007

The effects of phenolic acids on inhibition of browning by the Maillard reaction were investigated with a glucose-glutamic acid model for doenjang with citric acid as the antibrowning agent and phenolic acid as its synergist. Five phenolic acids, cinnamic, coumaric, caffeic, hydroxybenzoic, and protocatechuic acids, were used. In order to investigate the antibrowning capacity, 0.1M glucose, 0.1M glutamic acid, 50mM citric acid, and 1mM phenolic acid were dissolved in 1M phosphate buffer (pH 7.0), heated at $50^{\circ}C$ for 24hr in the presence of 0.2mM $FeCl_{2}$, and stored at $4^{\circ}C$ or $30^{\circ}C$ for four weeks. Phenolic acid addition more efficiently inhibited browning during storage at $30^{\circ}C$ than at $4^{\circ}C$, without changes in pH. Hydroxybenzoic acid was the most efficient and increased the antibrowning capacity by 13% compared to sample without phenolic acids. Although caffeic and protocatechuic acids inhibited most the formation of 3-deoxyglucosone or fluorescence, they increased browning by forming colored complexes between two hydroxy groups of phenolic acids and iron ions. Hydroxybenzoic acid will be able to be a useful synergist of citric acid, an antibrowning agent in doenjang, since it is permitted for doenjang.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.287-297
• /
• 2014

For several decades, many countries operating nuclear power plants have been studying the various disposal alternatives to dispose of the spent nuclear fuel or high-level radioactive waste safely. In this paper, as a direct disposal of spent nuclear fuels for deep geological disposal concept, the rod consolidation from spent fuel assembly for the disposal efficiency was considered and analyzed. To do this, a concept of spent fuel rod consolidation was described and the related concepts of disposal canister and disposal system were reviewed. With these concepts, several thermal analyses were carried out to determine whether the most important requirement of the temperature limit for a buffer material was satisfiedin designing an engineered barrier of a deep geological disposal system. Based on the results of thermal analyses, the deposition hole distance, disposal tunnel spacing and heat release area of a disposal canister were reviewed. And the unit disposal areas for each case were calculated and the disposal efficiencies were evaluated. This evaluation showed that the rod consolidation of spent nuclear fuel had no advantages in terms of disposal efficiency. In addition, the cooling time of spent nuclear fuels from nuclear power plant were reviewed. It showed that the disposal efficiency for the consolidated spent fuel rods could be improved in the case that cooling time was 70 years or more. But, the integrity of fuels and other conditions due to the longer term storage before disposal should be analyzed.

• Journal of KIISE:Databases
• /
• v.34 no.2
• /
• pp.109-118
• /
• 2007

Recently, flash memory is used to store data in mobile computing devices such as PDAs, SmartCards, mobile phones and MP3 players. These devices need index structures like the B-tree to efficiently support some operations like insertion, deletion and search. The BFTL(B-tree Flash Translation Layer) technique was first introduced which is for implementing the B-tree on flash memory. Flash memory has characteristics that a write operation is more costly than a read operation and an overwrite operation is impossible. Therefore, the BFTL method focuses on minimizing the number of write operations resulting from building the B-tree. However, we indicate in this paper that there are many rooms of improving the performance of the I/O cost in building the B-tree using this method and it is not practical since it increases highly the usage of the SRAM memory storage. In this paper, we propose a BOF(the B-tree On Flash memory) approach for implementing the B-tree on flash memory efficiently. The core of this approach is to store index units belonging to the same B-tree node to the same sector on flash memory in case of the replacement of the buffer used to build the B-tree. In this paper, we show that our BOF technique outperforms the BFTL or other techniques.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.227-237
• /
• 1995

Omeprazole(OMP) complexes such as inclusion complexes of OMP with $hydroxypropyl-{\beta}-cyclodextrin$(HPCD) and ${\beta}-cyclodextrin({\beta}-CD)$, OMP-cholestyramine(CHL) and OMP-ethylenediamine(OMP-ED) were prepared, respectively. The partition coefficients in Witepsol H-15 /pH 7.4 phosphate buffer solution of OMP complexes$(OMP-HPCD;\;3.69{\pm}0.26,\;OMP-{\beta}-CD;\;4.08{\pm}0.21,\;OMP-CHL;\;4.36{\pm}0.25\;and\;omeprazole\;sodium(OMP-Na);\;3.64{\pm}0.37)$ were higher than that of OMP $(2.66{\pm}0.47)$. OMP was not completely dissolved until even 3 hrs, but all the OMP complexes studied were released about 100% in 20 min. The rectal suppositories containing OMP or each above OMP complex were prepared using Witepsol H-15 base, and their dissolution and stability were examined, and pharmacokinetic study were investigated after their rectal administrations to the rabbits. While the suppository containing OMP was released only less than 60% in 150 min, $OMP-{\beta}-CD$, OMP-CHL, OMP-Na and OMP-ED suppositories were all released about 65% in 20 min. Especially, OMP-HPCD suppository released OMP about 70% in 10 min. All the additives such as sodium laurylsulfate, eglumine, arginine and PVP increased drug release from OMP-HPCD suppository to some extent. The decomposition rate constants of OMP in the suppositories were $9.117{\times}10^{-3}\;day^{-l}$ for OMP suppository, $2.121{\times}10^{-2}$ for OMP-HPCD, $1.607{\times}10^{-2}$ for $OMP-{\beta}-CD$, $9.26{\times}10^{-3}$ for OMP-Na, $6.769{\times}10^{-3}$ for OMP-CHL and $5.58{\times}10^{-3}\;day^{-l}$ for OMP-ED suppository, respectively. Additives such as arginine, eglumine and ED had some stabilizing effect for OMP-HPCD, OMP-CHL and OMP-Na suppositories, respectively. After 6 month-storage at $30^{\circ}C$, 75% RH, OMP-CHL suppository was most stable. The values of Tmax for OMP-HPCD and OMP-Na suppositories were $11.7{\pm}2.36\;and\;11.4{\pm}2.56\;min$, respectively. The values of Cmax for OMP-HPCD and OMP-CHL suppository were $2.31\;{\mu}g/ml\;(p<0.01)\;and\;1.89\;{\mu}g/ml\;p<0.01)$, respectively. The values of AUC for OMP and $OMP-{\beta}-CD$ suppository were $61.9{\pm}25.79\;and\;68.6{\pm}29.48\;{\mu}g\;{\cdot}\;min/ml$, and the corresponding values for OMP-HPCD and OMP-CHL were $106.1{\pm}43.16\;(p<0.05)\;and\;127.3{\pm}42.52\;{\mu}g\;{\cdot}\;min/ml(p<0.01)$, respectively. The above results indicate the OMP-HPCD and OMP-CHL suppositories have the excellent bioavailabilties in vivo study.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.222-230
• /
• 2013

Retinal bipolar cells according to the light stimulus respond to potential slowly, emit neurotransmitter release(glutamine acid) to depend on membrane potential. In this paper, the several physiological information on neurotransmitter release mechanism in the presynaptic terminal of the ON-type bipolar cells are incorporated into the formula model. The source of fast components and slow components of neurotransmitter release was arranged in parallel, this model was able to reproduce the membrane potential and intracellular $Ca^{2+}$ concentration dependence of neurotransmitter release faithfully. In addition, because the fast releasable components of neurotransmitter was represented by the membrane potential dependence of trapezoid type, whereas the slow releasable components was represented by the membrane potential dependence of a bell type, $Ca^{2+}$ concentration rise in intracellular is suppressed by $Ca^{2+}$ buffer to reduce slow releasable components, it was confirmed that the membrane potential dependence of neurotransmitter release was characteristics of a trapezoid type. And, in the light response of ON type bipolar cell, the result of the simulation of the neurotransmitter release caused by the components of transient and persistent was that the start of light response occurred the fast release of neurotransmitter, it was confirmed that the transient component and persistent component of the light response occurred the slow release. It was confirmed that the later of persistent component of the light response occurred due to the continuous release by synaptic vesicle supplemented from the storage pool.

• Clean Technology
• /
• v.21 no.4
• /
• pp.224-228
• /
• 2015

Phospholipase D (PLD) was immobilized on a submicro-porous membrane through covalent immobilization. The immobilization was conducted on the porous membrane surface with the treatment of polyethyleneimine, glutaraldehyde, and the anhydrase, in sequence. The immobilization was confirmed using X-ray photon spectrometer. The pH values of phosphatidylcholine (PC) dispersion solution with buffer were monitored with respect to time to calculate the catalytic activities of PC for free and immobilized PLD. The catalytic rate constant values for free PLD, immobilized PLD on polystyrene nanoparticles, and immobilized PLD on a porous cellulose acetate membrane were 0.75, 0.64, and 0.52 s^-1, respectively. Reusability was studied up to 10 cycles of PC hydrolysis. The activity for the PLD immobilized on the membrane was kept to 95% after 10 cycles, and comparable to the PLD on the nanoparticles. The stabilities for heat and storage were also investigated for the three cases. The results suggested that the PLD immobilized on the membrane had the least loss rate of the activity compared to the others. From these studies, the porous membrane was feasible as a carrier for the PLD immobilization in the production of phosphatidic acid.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.8
• /
• pp.1239-1244
• /
• 2003

Microcapsules were prepared by coacervation method using acetone/liquid paraffin system to control the ripening of kimchi. Eudragit E100, which was soluble at below pH 5.0 in aqueous solution, was used to make microcapsules to be sensitive to acidity of kimchi. The microcapsules with Eudragit E100 containing grapefruit seed extract (GFSE) showed the highest yield of 92.13%, the size of microcapsules was decreasing as increasing the amount of aluminium stearate, a dispersing agent. Morphology of the microcapsules determined by scanning electron microscopy showed spherical forms. GFSE, encapsulated antimicrobial agents, was quickly released at acidic buffer (pH 4,5,6) within 1 storage day. However, 70% of encapsulated GFSE in Eudragit E100 microcapsules was continuously released at pH 7 till 3 days, and it was sustained till 9 days. Characteristics of kimchi containing microcapsules of GFSE were analysed with ripening period. Decease of pH in kimchi was retarded with the added GFSE microcapsules till 2 days of fermentation, but GFSE did not affect pH in kimchi after 3 days. Total numbers of microorganisms and lactic acid microorganisms in kimchi were decreased with increasing the amount of the added GFSE microcapsules, however, the effect of controlled released GFSE from pH sensitive Eudragit E100 microcapsules was hard to detect. These results suggest the possibility of pH sensitive microcapsules for high qualify of kimchi.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.3
• /
• pp.169-179
• /
• 2011

There are two types of nuclear reactors in Korea and they are PWR type and CANDU type. The safe management of the spent fuels from these reactors is very important factor to maintain the sustainable energy supply with nuclear power plant. In Korea, a reference disposal system for the spent fuels has been developed through a study on the direct disposal of the PWR and CANDU spent fuel. Recently, the research on the demonstration and the efficiency analyses of the disposal system has been performed to make the disposal system safer and more economic. PWR spent fuels which include a lot of reusable material can be considered being recycled and a study on the disposal of HLW from this recycling process is being performed. CANDU spent fuels are considered being disposed of directly in deep geological formation, since they have little reusable material. In this study, based on the Korean Reference spent fuel disposal System (KRS) which was to dispose of both PWR type and CANDU type, the more effective CANDU spent fuel disposal systems were developed. To do this, the disposal canister for CANDU spent fuels was modified to hold the storage basket for 60 bundles which is used in nuclear power plant. With these modified disposal canister concepts, the disposal concepts to meet the thermal requirement that the temperature of the buffer materials should not be over $100^{\circ}C$ were developed. These disposal concepts were reviewed and analyzed in terms of disposal effective factors which were thermal effectiveness, U-density, disposal area, excavation volume, material volume etc. and the most effective concept was proposed. The results of this study will be used in the development of various wastes disposal system together with the HLW wastes from the PWR spent fuel recycling process.