• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.8-13
• /
• 2010

Many vehicles have significantly under-inflated tires, primarily because drivers infrequently check their vehicles' tire pressure. When a tire is used while significantly under-inflated, its sidewalls flex more and the tire temperature increases, increasing stress and the risk of failure. In this study we evaluated tire safety and economical efficiency at various inflation pressure. For tire safety we performed FMVSS indoor durability test, measurement of rolling tire temperature, braking performance at dry/wet road condition, and rolling resistance test for economical efficiency. Results show that low pressure decreases tire durability of both speed-increase condition and load-increase condition. Heat temperature of rolling tire increases as pressure decreases and significantly under-inflated tires cause increase of vehicle's stopping distance at wet road condition. Also Under-inflation increases the rolling resistance of a tire and, correspondingly, decreases vehicle's fuel economy.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.27-36
• /
• 1997

For the strength design of the brake system of a forklift truck, a procedure to calculate the internal forces acting on the system is presented in this paper. Vehicle dynamics, brake system kinematics, and internal force equilibrium analysis are integrated into the procedure. Design parameters such as stopping distance, maximum decceleration, and maximum torque generated by pedal force are considered in the vehicle dynamics, and geometric parameters of the brake system are considered in the brake system kinematics. With the two analysis results obtained, the internal forces acting in the brake system are finally calculated in the procedure.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.101-110
• /
• 2003

Motorcycle industry, for its competitive position, depends on part design technology. This part design has a bulky amount of data and asks the accumulation of advanced technical skill and experience, and fragmentary technical application is not enough to get to the kernel of a problem. Therefore, the improvement of proper productivity - the starting point of engineering design - and useful Design Methodology for products manufacturing are needed. Thus this paper is aimed to create a program that outputs dynamic characteristics of a vehicle when the data from fully understanding on motorcycle's brake system and induced formula for brake design are inputted. This paper is intended to show a creative design method by the thermal analysis data through FEM study and using shape design parameters derived from our programs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.67.4-67
• /
• 2002

Antilock brake System (ABS) is a essential safety equipment for modern vehicles. It prevents wheels from being locked-up when emergency braking of a vehicle is required. So it can improves directional stability of the vehicle, shortens stopping distance. Heavy Vehicles such as trucks and buses use mainly pneumatic pressures for their braking systems, where pneumatic modulators control the flow rate of compressed air thus braking pressures in the wheels. In this paper, a antilock braking algorithm which is suitable for heavy vehicles was developed. This algorithm uses limit cycle of wheels and is implemented in the ABS ECU. The developed algorithm and ECU were tested in the labo..

• 한국항해학회지
• /
• 제5권1호
• /
• pp.25-35
• /
• 1981

Since 1960 tankers and bulk carriers have rapidly increased in size up to 500, 000 dwt. in operating as main system of transportation for the international trade at sea, and studies are doing carried out by various groups with a view to increasing the size still further. However, the service speed of these ships has remained almost constant, and steering devices of them have nearly not changed, comparing with regular size of a dry cargo ship. This creats the dituation where stopping distance and advance are proportionally longer for larger ships. In case of collision at sea, these vessels have been arised some serious casualties, such as sinking, fire and oil pollution. This paper analyzers a study for the handling of super huge vessels to avoid collision at sea, basing on the results of the crash astern test and turning test of them.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.560-563
• /
• 1998

For the next generation railway brake system, a disc brake which can be operated directly and electrically is strongly expected. This paper deals with newly developed disc brake actuator using giant magnetostrictive materials(GMM) which can be integrated with disc brake. Regarding the brake system performance, a better delay time was also attained which can be integrated with disc brake. Regarding the brake system performance, a better delay time was also attained which will contribute to shorten a stopping distance.

• Journal of Radiation Protection and Research
• /
• 제16권2호
• /
• pp.7-16
• /
• 1991

감마선 조사선량의 국가표준을 확립하기 위하여 Co-60 감마선에 대한 조사선량률 절대 측정을 수행하였고 그 값이 갖는 오차한계를 분석 평가하였다. 측정기로는 고순도 흑연으로 제작된 원통형 이온전리함을 사용하였고 이온화 전류 측정은 vibrating reed 증폭기를 사용한 전하모드법에 의해 수행되었으며 관련 물리상수 및 각종 관련 보정인자를 평가하여 이온화 전류 측정값으로부터 조사선량률을 결정하였다.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.17-24
• /
• 2006

Anti-lock brake system(ABS) are designed to prevent wheel lock on all wheels of the vehicle by sensing wheel angular speed, processing the speed sensor signals in suitable digital electronic control circuits and comanding electrohydraulic actuators to control brake pressure. This study considers a control of ABS using wheel circumferential acceleration thresholds which avoids dangerous wheel locking due to excessive brake pressure during the vehicle braking and discusses the 3-channels, 3-sensors ABS system that employs "independent control" technique for the front wheels and "select low" technique for the rear wheels. The validities of the ABS such as vehicle stability, steerability and stopping distance during braking are assured through the vehicle tests on uniform asphalt straight roads.

• 한국안전학회지
• /
• 제24권1호
• /
• pp.69-77
• /
• 2009

This paper reports the aging driver traffic accident severity modeling results. For the modeling, Poisson regression approach is applied using the data set obtained from the Korea Transportation Safety Authority's simulator-based driver aptitude test results. The test items include the estimations of moving objects' speed and stopping distance, drivers' multi-task capability, and kinetic depth perception and so on. The resulting model with the response variable of equivalent property damage only(EPDO) indicated that EPDO is significantly influenced by moving objects' speed estimation and drivers' multi-task capabilities. More interestingly, a comparison with the younger driver model revealed that the degradation of such capabilities may result in severer crashes for older drivers as suggested by the higher estimated parameters for the older driver model.

• International Journal of Railway
• /
• 제2권1호
• /
• pp.22-29
• /
• 2009

A simple pendulum shows how efficient gravity is in recovering energy. Any transportation is a linearly oscillating system; every load gains kinetic energy, but loses the same to come to a stop. The Gravity Power Towers comprise of a set of vertically moving heavy masses coupled, through microprocessor controlled continuously variable gear and cable system, to a horizontally rolling unit on wheels either on rail or road. The heavy masses move vertically up against gravity gaining potential energy while stopping a moving mass; move down under gravity force, giving out energy. The Tower thus accelerates or sustains the speed a rolling unit, and while decelerating, recover the kinetic energy. Speeds of 360 kmph can be attained. Recovery of energy varies from 98.5-70%; the longer the distance between stops, the lesser is recovery. The economical, omnipresent & eternal Gravity Power grants energy independence to many a nation. Global warming reduces.