• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.937-939
• /
• 2000

The preventive structure of field lead connector's V-notch on synchronous generator has been developed. The preventive structure of field lead, installed in the generator, prevent from V notch of field lead connector in rotor on daily start and stop (on-line). This development of study was performed at the Seoinchon combined cycle power plant on gas turbine generator. This preventive structure of field lead will be prevent from V-notch of field lead on synchronous generator's field.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.40-45
• /
• 2008

In this paper, the exact analysis of the parallel coupled line with open stub and an application to branch-line hybrid are presented. The Z-parameter of the parallel coupled line with an open stub is derived. The structure shows the characteristics as a lowpass filter unit cell(LUC) with wide stop band. Using the characteristics we designed a miniaturized branch-line hybrid with wide harmonic-suppressed band. The size of the new branch-line hybrid is a half of the conventional branch-line hybrid. The frequency response is the same with that of the conventional one near 1.7 GHz center frequency. Including the fifth harmonics, up to 12 GHz spurious responses are suppressed below to -20dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.260-267
• /
• 2014

In this paper, the unit cell of LH structure using microstrip transmission line and chip capacitor is devised, and the reactive components of equivalent circuit are extracted from the proposed unit cell. And then, we have analyzed for the unit cell parameters and applied the characteristics to the wideband high pass filter design. This filter cascading several unit cells with high pass property has been implemented on microstrip transmission line, and the performance has been the band rejection characteristics of 62.9 dB in the stop band to 0~2.18 GHz and less than the insertion loss of 1.17 dB in the pass band from 3.0G Hz to 12.75 GHz.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.490-497
• /
• 2011

When operating Express and Standard trains, which run with two different scheduled time, in a single line with limited number of side tracks for overtaking standard trains, it is required to have various modeling methodologies and simulations in order to calculate an optimum headway to maximize the capacity of the line with the best scheduled time. Especially it is inevitable that following trains have to slow down or stop in the middle of their operations due to the preceding trains, in case it is inappropriate controlled about either in which station an overtaking should be taken or how long it should be. This study is to analyze TPS data which have been produced with a simulation program which the team has invented to optimize Express and Standard mixed traffic plan and to introduce an algorism which shows detected conflict data, calculates appropriate dwell time after getting overtaken and helps to decide stations for overtaking.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.484-489
• /
• 2011

Heights of a platform above the rail for the passenger train in the country are classified into two categories such as the low level (500mm; mainline) and the high level (1,135mm; metropolitan subway line) platforms. In order to operate similarly both a mainline railroad and a metropolitan subway line, as the requisite door safety system, it is necessary to develop the doorstep equipment of the rolling stock regardless of both the low and high level platforms. In this study, performance requirements of doorstep equipments used for two types of platforms are examined on the supposition that the train only for the low level platform could stop in the both low and high level platforms.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.162-169
• /
• 2016

Gyeong-bu railway line in Korea between Seoul and Cheon-an was built as two double tracks. A four-display signaling system, only for the metro line, was installed on the second double track so KTX and conventional trains can only operate on the first double track. This study suggests a method to allow KTX and conventional trains operated on the five-display signaling system to respond to accidents and track defects on the second double-track under the four-display signal system by means of problem analysis, calculation of breaking distances for KTX and conventional trains at each break mode, and improvement of the ATS system.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.279-282
• /
• 2006

Upon a turbopump's running, cavitation may occur at the inlet of the LOx pump by pressure drop and heat transfer along the LOx feeding line. Since the cavitation can cause serious damage to the pump or to stop running, the absence of the cavitation at the inlet of a turbopump should be confirmed before the using the turbopump. In the present study, the calculation of the volume fraction of LOx gas phase at the inlet of the pump are performed with different temperatures of LOx in the tank, pressure drops and heat transfers along the feeding line. This calculation method can be applied to define the limits of thermal and hydraulic characteristics during the design of a LOx feeding system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.146-150
• /
• 2015

Steel is produced through the steel-making process with a desired shape by a rolling press. Scrap is removed according to the sheet edge to improve the quality of the product. This machine is called a side trimmer. This study aimed to develop a side trimmer for automatically changing the width of the trimming knife without line stopping. This machine consists of a housing opening device and a turning device. The measuring technologies of sheet width, trimming knife rotation angle, and knife gap for increasing the control accuracy. This experiment was conducted to evaluate the performance of the developed technologies. It was reduced by 10% compared with the operation time of the conventional method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.212-217
• /
• 2004

In general, the braking system of high speed train has an important role for the safety of the train. To stop safely train at its pre-decided position, it is necessary to combine properly the various brakes. The prototype of Korean high speed train (KHST) has been designed, fabricated and tested by the domestic researchers. It has adopted a combined electrical brakes, such as rheostatic brake, regenerative brake and eddy current brake, and mechanical brakes composed of disc brake, wheel disc brake and tread brake. In this paper, the performances and control algorithms of braking system have been reviewed by the experimental method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.1
• /
• pp.62-68
• /
• 2012

In this paper, a detection method of a pedestrian safety road marking was proposed. The proposed algorithm uses laser range and reflectivity of a range finder (LRF). For a detection of crosswalk marking and stop line, the DFT (Discrete Fourier Transform) of reflectivity and cross-correlation method between the reference replica and the measured reflectivity are used. A speed bump is detected through measuring an altitude difference of two LRFs which have the different tilted angle. Furthermore, we proposed a velocity constrained a detection method of a speed bump. Finally, the proposed methods are tested in on-line, on the pavement of a road. The considered road markings are wholly detected. The localization errors of both road markings are smaller than 0.4 meter.