• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.984-995
• /
• 1996

Data errors according to the various noises caused in the satellite communication links are corrected by the Viterbi decoding algorithm which has extreme error correcting capability. In this paper, we designed and implemented a convolutional encoder and Viterbi decoder ASIC which is used to encode the input data at the transmit side and correct the errors of the received data at the receive side for use in the VSAT communication system. And this chip may be used in any BPSK, QPSK, or OQPSK transmission system. The ambiguity resolver corrects PSK modem ambiguities by delaying, interting, and/or exchanging code symbol to restore their original sequence and polarity. In case of previous decoding system, ambiguity state(AS) of data is resolved by external control logic and extra redundancy data are needed to resolve AS. But, by adopting decoder proposed in this paper, As of data is resolved automatically by internal logic of decoder in case of continuous mode, and by external As line withoug extra redudancy data in burst mode case. So, decoding parts are simple in continuous mode and transmission efficiency is increased in bust mode. The features of this chip are full duplex operation with independent transmit and receive control and clocks, start/stop inputs for use in burst mode systems, loopback function to verify encoder and decoder, and internal or external control to resolve ambinguity state. For verification of the function and performance of a fabricated ASIC chip, we equiped this chip in the Central and Remote Earth Station of VSAT system, and did the performance test using the commerical INTELSAT VII under the real satellite link environmens. The results of test were demonstrated the superiority of performance.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.187-196
• /
• 2015

The team's performances were analyzed by evaluating the scores gained by their offense and the scores allowed by their defense. To evaluate the team's attacking and defending abilities, we also considered the factors that contributed the team's gained points or the opposing team's gained points? In order to analyze the outcome of the games, three prediction models were used such as decision trees, logistic regression, and discriminant analysis. As a result, the factors associated with the defense showed a decisive influence in determining the game results. We analyzed the offense and defense by using the response variable. This showed that the major factors predicting the offense were non-stop pass and attack speed and the major factor predicting the defense were the distance between right and left players and the distance between front line attackers and rearmost defenders during the game.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.1-8
• /
• 2019

The HPM (High-speed Power Matching) system is an electro-hydraulic control system. It directly controls the swash plate of the pump by selecting four-loop logic based on joystick signals, pump flow, and pressure signal to improve the efficiency and controllability of construction machines. In the NFC (Negative Flow Control) system, a typical pump control system using conventional open center type MCV, the loss is continuously generated by flow through the center bypass line even when the excavator is not in operation. Also, due to the slow response of the pump that indirectly controls the flow rate using the pressure regulator, peak pressure occurs at the start or stop of the operation. Conversely, the HPM system uses an MCV without center-by-pass flow path and the swash plate of a pump for the HPM is controlled by a high-speed proportional flow control valve. As a result, the HPM system minimizes energy loss in standby state of the excavator and enables peak pressure control through rapid electro-hydraulic control of a pump. In this paper, the concept of the HPM system algorithm is introduced and the hydraulic system efficiency is compared with the NFC system using the excavator SAT (System Analysis Tool).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.191-196
• /
• 2019

In the case of urban railway facilities, the power supply should be maintained for the safe movement of passengers in communication facilities, disaster prevention facilities and boarding area security because of the confusion when power supply is cut off due to the nature of public transportation. In addition, considering that the number of trains is running on the urban railway line, it is necessary to operate at least 30 minutes for the bus stop and at least 1 hour for the communication and disaster prevention facilities. Therefore, it is essential to supply emergency power source to maintain stable operation of induction lamp and smoke exhaust system because main power is cut off in order to prevent further spread due to fire in case of the history of urban railway section or vehicle fires. Recently, UPS(Uninterruptible Power Supply) function to prevent power outage in emergency, emergency power generation combined with ESS function which saves electricity at nighttime price time, A hybrid power storage system with a UPS function.

• Tribology and Lubricants
• /
• v.31 no.3
• /
• pp.109-124
• /
• 2015

This paper presents a wear analysis procedure for the journal bearings on a stripped-down single-cylinder engine during start-up and coast-down by motoring. A journal bearing is in the mixed elastohydrodynamic (EHL) lubrication region when the shaft speed is less than the corresponding lift-off speed. Below the lift-off speed, a wear scar can form on bearing surfaces. In part 1 of this paper, we develop the appropriate formulations and the calculation procedure for the analysis. Specifically, we formulate an equation for modified film thickness in a journal bearing considering the additional wear volume. In order to obtain the modified specific wear rate induced by the modified Archard’s wear coefficient, we utilized the extended non-dimensional diagram for the specific wear rate, k, the fractional film defect coefficient, Ψ and the asperity load sharing factor, γ₂. This asperity load sharing factor is newly calculated by setting the Zhao-Maietta-Chang (ZMC) asperity contact pressure equation coupled with the central film thickness equation derived by using the ZMC asperity contact model equal to the modified central contact pressure derived by using the central (or maximum) contact pressure at the dry rough line-contact configuration. We can use the procedure introduced in this paper to determine the lifetime (or longterm) linear wear in radial journal bearings that is a result of repeated stop-start cycles.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.3
• /
• pp.181-185
• /
• 2018

Objective: The purpose of this study was to investigate the effect of types of drive-in initial steps in basketball on technical factors, to provide basic information for the enhancement of basketball skill. Method: Ten men (age: $24.70{\pm}2.26years$; height: $181.00{\pm}5.72cm$; weight: $75.70{\pm}8.23kg$; career length: $10.00{\pm}3.59years$), each with a career length of over five years and no history of injury to the lower extremities within the prior six months, participated in this study. They were asked to perform four types of drive-in movements at $35{\sim}60^{\circ}$, wearing their own shoes, after running from a start line 5 m away and catching a basketball passed by an expert passer. The drive-in movements were measured by eight infrared cameras (Oqus 300, Qualisys, Sweden). Collected raw data were used to calculate total initial step time, displacement, velocity, center of mass (COM) height, and COM velocity. Results: Total initial step displacement and velocity of cross drive-ins (JC, SC) were greater than that of direct drive-ins (JD, SD; p < .05). COM velocity of cross drive-ins (JC, SC) was also greater than that of direct drive-ins (JD, SD; p < .05). Conclusion: Our results indicated that cross drive-ins, regardless of stop step type, are more effective than direct drive-ins. This is because cross drive-ins are technically bold due to less influence from walking violations and double dribble rules in basketball. However, using one-sided movement is too difficult to play in competitive game; therefore, basketball players should develop the ability to choose appropriate movement frequency.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.2 s.9
• /
• pp.111-118
• /
• 2003

Korea High-Speed Railway has various safety systems to secure safe and stable transportation and makes assurance doubly sure to minimize casualty and property damage caused by natural disasters. But, there is no regulation that reflects domestic railway line, climate, topographical and geological characteristic in introducing the foreign regulations yet. Therefore, it is necessary for us to modify a regulation which is suitable to domestic high-speed railway. In this study, it is possible to establish more reasonable boundary rainfall by grasping and improving the troubles with existing boundary rainfall that is scheduled to be utilized for high-speed rail-transport operation control under rainfall. Also, it is possible to insure the safety of train by four steps such as 'normal operation', 'warning issue', 'train speed control' and 'train stop' using the established boundary rainfall. It will go far toward minimizing the occurrence of natural disasters.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.153-160
• /
• 2012

Various social problems such as traffic congestion, car accidents and environmental problems(air pollution, noises etc.) have been happening in the Seoul metropolitan area that has the car oriented traffic system providing cars continuously. Along with this, the financial burden caused by current oil price anxiety made paradigm shift from caroriented to public transportation-oriented. Its typical example is an arterial branch bus system changing(bus lane through the center of main road) started in Seoul in July, 2004. But study on safety analysis of bus lane and characteristic of accidents are not sufficient enough to now. The bus lanes are expanded to provide roads for better traffic operation and accidents between buses and pedestrians or ordinary vehicles are considered main problems. This study divided each bus route of median bus lane(bus-only lane through the center of main roads) and bus lane at roadside by intersection and collected and analysed data about influence variables of bus accidents chosen in each section. We constructed a logistic model using collected data. As a result, bus lane at roadside are used by both buses and other kinds of vehicles differently from median bus lane and showed such characteristic in accident influence. Therefore access management to factors causing conflict and improvement of operation management are required. In case of median bus lane, the more buses moving general vehicle lane and traffic volume of section were, the more accidents happened. In case that stop line of center lane is not backward, view blocking of vehicles turning left caused accidents.

• International Journal of Aerospace System Engineering
• /
• v.2 no.1
• /
• pp.1-5
• /
• 2015

The Unmanned Air Vehicle (UAV) systems are indispensable tools of air surveillance and reconnaissance nowadays. Via this systems, hazardous end risky intelligence gathering activities are handled easily. Although they are named as "Unmanned" the UAV systems are commanded by pilots/operators. So, because of weather conditions, enemy attacks etc. as well as pilot error it is possible to face with sudden Round per Minute (RPM) drops and subsequently engine cut/stop during a mission flight at high altitudes. In this case, there are some very urgent decisions to make and rapid "emergency procedure" steps to take in a very short time before Line of Sight (LOS) is lost. The time before crash and the distance to landing air base need to be calculated, the Return Home route need to be checked and the landing/crash side need to be determined. Therefore it is a vital necessity that UAV pilots have some extra qualifications like being determined, well instructed and trained, experienced apart from operating ability. Within this scope, for an education process of a UAV pilot experience sharing and lessons learned are as important as simulators even more. By means of lessons learned it is possible to find out the reasons, mistakes and prevent the likely UAV accidents. In this study it is told about a real UAV crash, experienced of the pilot, the dos and don'ts and the difficulties. Thus it is aimed to help the people who can experience the same or similar situations in future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.26-37
• /
• 2009

This paper suggests a sensor's placement method for detecting the dilemma zone problem when real-time driver's safety service is provided at signalized intersections by multiple pointed traffic sensors using USN environments. For detecting the dangerous situations from vehicles accelerating through yellow intervals, red-light running and stopping abruptly like as dilemma zone problem, VISSIM(microscopic, behavior-based multi-purpose traffic simulation program) is used to perform a real-time multiple detection situation by changing the input data like as various inflow-volume, design speed change, driver perception and response time. As a result, the optimal interval of traffic sensors is 20~27m, and the initialized sensor location from stop-line is different according to road design speed. Moreover, the pattern of detection about dilemma zone is also different according to inflow-volumes. This paper shows that the method is useful to evaluate the sensor's placement problem based on micro-simulation and the results can be used as the basic research for USN services.