• 한국전통조경학회지
• /
• 제40권3호
• /
• pp.67-73
• /
• 2022

본고는 문화재 미등록 민가정원의 조영 당시 형태를 각 정원의 원형으로 삼아 미등록 민가정원의 변화과정을 추적하여 정원의 공간적 가치를 규명하고 전통정원의 계승과 변화라는 관점에서 미등록 민가정원의 역사공간적 가치를 논구하였다. 이를 위해 최근 지정문화재의 해제 수량 증가로 인해 정원의 보존 또한 위기에 처해 있는 강원도의 문화재 미등록 민가정원을 대상으로 정원의 공간변화를 통하여 미등록 민가정원의 양상을 규명하고 그 특성 및 가치를 천착하였고 이를 통하여 다음의 결과를 도출하였다. 첫째, 문화재 미등록 민가정원은 집성촌 지역에 입지하여 전통정원의 형태를 계승 유지할 수 있었다. 정원공간은 유교적 철학의 영향으로 공간이 구획되고 정원의 구성요소와 수종 및 식재방식이 달리 나타나고 있었다. 신분적 위계에 따른 정원 구성요소의 사용이 나타났다. 둘째, 대상지 4개소에서 공간의 축소가 지속적으로 확인되었다. 축소된 공간들은 정원공간들로서 도로의 신설과 환경개선 사업으로 정원의 일부가 국가로 귀속되는 현상이 나타났다. 셋째, 대상지 4개소 중 3개소에서 수령 100년 이상의 노거수 8주가 생육하고 있고 정원 구성요소들은 한중일 삼국에서 조선시대와 동시대에 사용되었던 석수조, 취병, 지당 등이 공통적으로 확인되어 전통정원의 역사성을 계승하고 있음을 확인할 수 있었다.

• 한국전통조경학회지
• /
• 제40권1호
• /
• pp.15-25
• /
• 2022

본 연구는 창덕궁 승화루(承華樓) 남측 공간에 위치한 화계(花階)의 조성 경위를 탐색하고, 화계 조성 전후의 실상을 파악하여 향후 내전(內殿) 지역의 복원정비에 유용한 기초자료를 확보하기 위해 수행되었다. 연구의 주요 결과는 다음과 같다. 첫째, 1900년대 초반 승화루 남측 공간은 낙선재(樂善齋) 일곽보다 상대적으로 높은 지대(地帶)를 형성하고 있었다. 또한 북고남저지형을 따라 행각으로 위요된 마당, 낙선재 서행각(西行閣)과 연결되는 장방형 공지(空地)가 조성되어 있었다. 특히 장방형 공지는 일정 간격으로 장대석 석렬을 배치한 계단형 경사지였다. 둘째, 승화루 화계는 1920년대 후반에 시행된 낙선재 서행각의 신관(新館) 개축공사로부터 비롯되었다. 신관 건립 과정에서 건축 및 부대공간 조성에 필요한 가용지(可用地)를 충분히 확보하기 위해 승화루 남측 공간의 원지형을 절토한 이후 절개지를 따라 지형처리 목적의 화계가 조성되었다. 셋째, 화계 조성 이후 승화루 남측 공간의 지형지물에 많은 변형이 발생하였다. 승화루의 앞마당은 낙선재 일곽보다 고지대에 자리하고 있었지만, 화계가 조성되는 과정에서 대부분 절토되어 사라졌다. 계단형 경사지 역시 신관 건축과 화계 조성 이후 자취를 감추었다. 화계의 선형을 따라 승화루 기단과 담장이 새롭게 조성되었으며, 독특한 양식의 협문과 부속 계단도 신설 담장으로 이설되었다.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.242-254
• /
• 2000

Accurate impression is very important to achieve desirable prosthesis and there are many factors in taking a good impression. For example, types of impression material, types of impression tray, impression taking methods and so on. Recently individual tooth tray technique is accepted as obtaining good impression that can be applied to multiple abutment impression, heavy salivated patient, to minimize the effect of natural teeth s undercuts and to reduce pain during cord packing procedures. The purpose of this study was to compare the accuracy according to materials and forms of the individual tooth tray which is clinically applied nowadays. Used materials in experiment were divided into 3 types (acrylic resin. $Futar^{(R)}$ occlusion. $Blu-mousse^{(R)}$) and forms were divided into 2 types (forming occlusal vent hole or not and forming marginal vent space or not). Stone master model from impression body and metal master model were measured by $X-PLAN360d^{(R)}$ to compare occlusal surface discrepancy and marginal discrepancy. The results were as follows: 1. In comparison of occlusal surface discrepancy and marginal discrepancy according to materials, groups with three materials showed no statistical difference 2. In comparison of occlusal surface discrepancy and marginal discrepancy according to occlusal vent hole, groups with occlusal vent hole showed significantly less marginal discrepancy than groups with no occlusal vent hole(p<0.05). 3. In comparison of occlusal surface discrepancy and marginal discrepancy according to 0.5mm-marginal-vent-space, groups with no 0.5mm-marginal-vent-space showed significantly less marginal discrepancy than groups with 0.5mm-marginal-vent-space (p<0.05). In summary these results suggest that individual tooth tray made of 3 types of materials with occlusal vent hole and individual tooth tray made of acrylic resin with no marginal vent space showed good accuracy of impression. In addition, individual tooth tray which is made of bite registration materials may be more useful because of advantage in facility and timesaving aspect of fabrication.

• 한국전통조경학회지
• /
• 제37권1호
• /
• pp.12-22
• /
• 2019

본 연구는 매장문화재 보존형 역사공원의 설계 여건으로서 관련 법규와 제도를 고찰한 후, 비지정문화재를 보존조치한 능곡선사유적공원, 안산신길역사공원, 용죽역사공원에 대한 사례 연구를 진행하여 설계 양상을 도출하였다. 연구의 결과는 다음과 같다. 첫째, 역사공원 관련 법규에 따르면 유적지의 보존과 활용을 동시에 만족시켜야 하고, 역사관련시설공간, 광장, 휴게공간, 운동공간, 교육문화공간, 편익공간을 도입할 수 있다. 둘째, 매장문화재의 보존만 강조한 공간구성과 동선 체계에 의해서 유구보존공간과 기능적 공간들이 격리되고, 주변 토지이용을 고려한 이용행태를 수용하지 않아서 역사공원의 효용성이 적었다. 셋째, 건축적 방식의 노출 현지보존, 움집 재현, 복토 현지보존 후 철쭉이나 석재로 수혈주거지 위치를 표시하는 소극적 유구보존방식과 관람 위주의 활용으로 인하여 역사공원의 정체성이 약했다. 넷째, 이용자 접근을 막는 울타리가 유구의 체험을 방해하고, 노출된 유구의 상부를 보호하는 수직 구조물이 역사공원의 경관을 압도하였다. 다섯째, 매장문화재 정보를 전달하는 안내판에 전문용어 위주의 텍스트와 발굴 사진만 제시하여 유구 공간을 이해하기 어려웠다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제21권2호
• /
• pp.17-24
• /
• 2015

Purpose: This study examines distance from nurse station to bed according to composition of single bedroom. Methods: This study has two groups of target sample ward planes. The first group has diverse patients bedroom. The other group is 36 single bedrooms and 2 3-bedrooms. The guideline of distance measurement was instituted for consistency. This study has 3 main concepts of the guideline. 1) The distance is shortcut from NS to bed. 2) The traffic line is center line between walls and center of door. 3) The start point is center of NS and the end point is bed. Results: The result of this study can be summarized into two points. The first one is that single bedroom has good privacy and longer distance from NS to bed. The second one is that weak point of single bedroom was asked ward operating system and architectural planning like as patients room, bed per unit, location of NS and plan type. Implications: Consideration Should be taken into account for the effective bedroom composition and allocation in ward. This Stuy hopefully serve as a stepping stone for the standard design of space program in ward planning.

• 한국환경복원기술학회지
• /
• 제10권1호
• /
• pp.72-81
• /
• 2007

This study mainly aims at suggesting plans applicable to the outdoor of environment-friendly communities in Korea by leveraging more natural conditions and materials when creating an outdoor biotop for an environment-friendly community and generating material types and development techniques enabling a natural circulation system. To this end, materials used in the outdoor of environment-friendly communities and traditional residential areas in Korea and biotop materials found in natural areas were examined. First, when the case examples of environment-friendly communities were reviewed, biotop spaces and materials that may function as habitats were hardly found. Materials used in biotop were mainly man-made structures made of artificial or processed materials, such as concrete, stones, bricks, woods and steels. Meanwhile, the outdoor space of traditional Korean villages had stone walls, soil walls, rock piles and composite piles, which composed of natural materials such as rocks, soil and plants, that naturally formed porous spaces along with the introduction of plants and provided habitats for a variety of insects. In natural areas, naturally created biotop spaces, such as rock piles, log piles, old tree deployment, branch piles, hay stacks and defoliated leaves, were found. Meanwhile, when spaces and materials available for biotop creation were reviewed to create an environment-friendly residential complex, they were divided into fences and hedges, green spaces between parks and residential buildings, ponds and waterscape spaces, zones separating pedestrian walks and roadways, breast walls and slope boundary, plant box and pergola. For each space, materials used for creating biotops and that were found in traditional Korean residential areas and natural areas were applied and suggested.

• 한국터널지하공간학회 논문집
• /
• 제4권4호
• /
• pp.319-332
• /
• 2002

국내 조적식 철도터널의 라이닝은 적벽돌이나 화강암의 석재블럭 또는 석축으로 구성되어 있다. 조적식라이닝은 지진하중에 대한 고려가 없이 시공이 되어 있어 지진시 거동에 대한 연구가 필요하다. 따라서 본 연구에서는 철도터널내 조적식 라이닝에 대한 물성평가 및 내진 해석기법을 개발하여 내진성능을 평가할 수 있도록 하였다. 적벽돌 조적식 라이닝은 배열이 지반조건에 따라 3~5층으로 구성 되어 있으며 벽돌과 벽돌은 모르터로 부착이 되어 있다. 본 연구에서는 조적식 라이닝의 거동분석 및 내진성능 평가를 위해 적벽돌, 횡줄눈, 종줄눈과 배면줄 눈을 각각 고려한 모형을 개발하였다. 내진해석은 구조물의 고유주기 뿐만 아니라, 지반과의 상호 작용을 고려한 전체계의 주기 등을 고려하는 응답스펙트럼해석을 실시하였다. 또한 라이닝과 지반조건변화에 따른 거동을 분석하고, 보강공법에 따른 거동을 분석하여 합리적인 보강공법을 유도하였다.

• 한국조경학회지
• /
• 제29권5호
• /
• pp.71-83
• /
• 2001

The purpose of this study is to find out the characteristics of landscape details in representing symbolic images in memorials on the themes of war, tragedy, and the democratization movement. In considering the characteristics of memorial landscapes, the researcher divided the characteristics of landscape details into 3 analysis categories. They are the symbolic application of landscape elements, the embodiment of landscape details, and the organization of landscape details to represent symbolic images, for example, memory, mourning, reflection, healing, glory, and identity. Among details in 24 memorials designed in or after 1970. 133 symbolic details were selected including 64 items in Korea. The analysis revealed that among 30 elements used by designers for memorialization, walls, ponds, sculptures were used more often than other elements in representing the meaning of mourning, reflection, and healing that are the basic function of memorial. In regard to detail form, the designers used basic shapes like circles, squares and rectangles, horizontal and vertical lines to heighten the symbolic effect of shapes in confined form. Stone and water utilized from nature were also used as main materials because of their materiality meaning of death, eternity, life, and healing. The techniques of using lighting, fire, and sound were introduced to make details more effective. Details were organized in harmony and repetition to represent the flew of time and space in symbolic images. The study identified the following characteristics of memorial landscapes in Korea that were different from other country first, in designing memorials, most designers in Korea have been more focused on the organization of space than the details in memorials, and so, they have been neglecting to deliver symbolic image through detail design, while depending mainly on the introduction of art works. Lastly, because they introduced traditional elements which have little relation with the symbolic image needed, there have been many details which inaccurately represent symbolic meanings.

• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.544-551
• /
• 2000

A fabrication method of inner and outer crown using CAD/CAM is presented. The information of abutment teeth is transferred to a computer through a 3-dimensional scanner. A Konus inner and outer crown is designed on a computer and a real crown is machined based on this design using CAM. This method can save laboratory time and reduce inaccuracies compare to conventional casting procedure. A stone model with six prepared abutment teeth from a patient was used in this study. Three dimensional information from the model was transferred to a computer using a contact type 3-dimensional scanner with a $25{\mu}m$ accuracy. All margins were identified on a computer image where there is a change in surface taper of a model. To provide a cement space, the image of a inner sur face of a Konus inner crown was duplicated $25{\mu}m$ apart from the surface of a prepared abutment teeth image. The cement space was $20{\mu}m$ at the cervical margin. All Konus crowns were machined with a $10{\mu}m$ accuracy. It was concluded that this method can reduce working-time for the laboratory process and increase accuracy. A further research is required to make a simplified process for a more complex prosthesis.

• 건축역사연구
• /
• 제21권4호
• /
• pp.7-24
• /
• 2012

The Buddhist cave temple carved into the rock provides a large space for the ritual in general in which a structure of Stupa is built in the center of the space purely for religious worship empty of Sarira, and the temple is formed around this Stupa. Relief-Stupa of the cave temple indicates the similar shape that of Relief-religious worship of flat land temple. However, there appears a small difference in representation since the background of formation of the cave temple differs in that of flat land temple. Specially, Caitya Stupa of currently existing cave temples have been damaged to lose of their original shape only possible to be analyzed the stylistic development through Relief-Stupa from which the characteristic of Stupa could be understood. The early cave temple could be characterized with a balanced structure consists of upturn bowl, steeple stone with simple drum & Hamikawasnagae, in which it appears strongly the detail factor characteristics of drum & steeple of having system with Caitya Stupa. In the post cave temple, the subject of worship moved to statue of Buddha due to the influence of Gandhara, Mathura art which reduced the importance of Stupa. This illustrates in Relief-stupa as well the style change as well as changes in detail factor. The sculpture appeared at the limited location either the wall of Caitya shrine or pillar in vihara cave with stronger decorative meaning. Contrast to the Relief Stupa of early flat land temples or the cave temples mentioned above sculptured with symbolism, however, the post cave temple showed the relief structure based on the plan of flat plan.