• Land and Housing Review
• /
• v.2 no.2
• /
• pp.189-194
• /
• 2011

To reinforce bearing capacity-changed section or different foundation in the same building, empirical or simple tools have been used. To solve this problem, we suggest the analytical solution that can evaluate and reinforce the stability of foundation. To estimate the effect of reinforcement by replacement in different foundation, soil stiffness evaluation method taking into account the influence factor with respect to depth beneath the foundation need to be applied. In this paper, graphs and relevant formulae are suggested to calculate equivalent soil reaction coefficient showing the effect of reinforcement by crushed stone and lean concrete replacement.

• Journal of Families and Better Life
• /
• v.24 no.3 s.81
• /
• pp.83-94
• /
• 2006

In order to understand how consumers' buying motivation is formed, that is the starting point of consumer behavior or consumers' decision-making processes, we examined how the interpersonal orientation for consumers is organized to control buying motivation and create a stepping-stone for subjects' behavior in fast varied consumer environments. In addition, we examined what influence this interpersonal orientation has on consumers' buying motivations. The results are shown as follows: First, interpersonal orientation is classified into six categories, according to Cohen's three types, i.e., compliance, detachment I: emotion independence, detachment II: performance independence, detachment III: perception independence, aggressiveness I: competitiveness, aggressiveness II: aggressiveness. Second, based on our inspection of the relation between interpersonal orientation and consumers' buying motivations, for external motivation and internal motivation, the value of R2 in regression seems too low to act as an influencing power on interpersonal orientation, while in case of introjected motivation, identified motivation I: self respect, and identified II: pursuit of harmony, I there seems to be some relationship.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.6
• /
• pp.736-749
• /
• 2015

The present study addresses the tea utensils and tea drinking methods seen in tomb mural paintings of Song, Liao, Jin, and Yuan, which were Koryo's foreign exchange countries. The paintings illustrate the pointing tea method, which was popular during dynasty times. Tea utensils observed in the paintings include a tea mill, mill stone, and tea pestle necessary for making cake tea into powder. The tea stove and boiling bottle are depicted as being required to boil water. Some mural works vividly depict how a tea drinker pours hot water from a boiling bottle into a cup with a stand, mixes it with a tea spoon, and whisks tea powder for foaming with a tea whisk. The tea drinking method of the Southern race Han is also similarly described in the tomb mural paintings of Liao, Jin, and Yuan from Northern nomads. The distribution of tea culture had an enormous influence on the development of tea utensil manufacturing methods. The significance of this study is that these findings can be used as basic data to provide food culture insights into Koryo celadon tea utensils.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.239-244
• /
• 2015

Chemical mechanical polishing (CMP) is one of the most important processes for enabling sub-14 nm semiconductor manufacturing. Moreover, post-CMP defect control is a key process parameter for the purpose of yield enhancement and device reliability. Due to the complexity of device with sub-14 nm node structure, CMP-induced defects need to be fixed in the CMP in-situ cleaning module instead of during post ex-situ wet cleaning. Therefore, post-CMP in-situ cleaning optimization and cleaning efficiency improvement play a pivotal role in post-CMP defect control. CMP in-situ cleaning module normally consists of megasonic and brush scrubber processes. And there has been an increasing effort for the optimization of cleaning chemistry and brush scrubber cleaning in the CMP cleaning module. Although there have been many studies conducted on improving particle removal efficiency by brush cleaning, these studies do not consider the effects of brush contamination. Depending on the process condition and brush condition, brush cross contamination effects significantly influence post-CMP cleaning defects. This study investigates brush cross contamination effects in the CMP in-situ cleaning module by conducting experiments using 300mm tetraethyl orthosilicate (TEOS) blanket wafers. This study also explores brush pre-treatment in the CMP tool and proposes recipe effects, and critical process parameters for optimized CMP in-situ cleaning process through experimental results.

• Geomechanics and Engineering
• /
• v.19 no.4
• /
• pp.329-342
• /
• 2019

In this paper, the effect of a group of sand columns in the loose soil bed using triaxial tests was studied. To investigate the effect of geotextile reinforcement type on the bearing capacity of these sand columns, Vertical encased sand columns (VESCs) and horizontally reinforced sand columns (HRSCs) were used. Number of sixteen independent triaxial tests and finite element simulation were performed on specimens with a diameter of 100 mm and a height of 200 mm. Specimens were reinforced by either a single sand column or three sand columns with the same area replacement ratio (16%) to evaluate the Influence of the column arrangement. Effect the number of sand columns, the length of vertical encasement and the number of horizontal reinforcing layers were investigated, in terms of bearing capacity improvement and economy. The results indicated that the ultimate bearing capacity of the samples with three ordinary sand columns (OSCs) is eventually about 11% more than samples with an OSC. Also, comparison of the column reinforcing modes showed that four horizontal layers of geotextile achieved similar performance to a vertical encasement geotextile at the 50% of the column height, from the viewpoint of strength improvement, while from the viewpoint of economy, the geotextile needed for encasing the single column is around 2.5 times of the geotextile required for four layers.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.4
• /
• pp.37-50
• /
• 2016

Recognizing the problem of fallacy in geographical name of Changokbyeong(蒼玉屛), assumption has been made on the location of Changokbyeong through literature research on antique maps, ancient paintings, and old prose, through field survey on rock inscriptions and landscape characteristics, and through interviews with local people. Furthermore, Baegyeonwa, the Cuckoo Hut, and Iyangjung(二養亭), an annex to the cottage, both of which were managed by Saahm Park Soon(思菴 朴淳), the Subject of Jouissance, were studied in depth with emphasis on the spatial structure as well as special features of the area as a garden. The major findings are as follows: Changokbyeong is a spatial threshold that imparts a sense of unity with Okbyeng seowon(玉屛書院) and indeed Changokbyeong is presumed to have been the frontal river terrace of Okbyeng seowon according to the analysis of antique maps and rock inscriptions. This ancient location and the Ogari Stone Wall, the present day Changokbyeong, are only 460m away so that both areas are considered as falling under the influence of Changokbyeong landscape. The expression "Changokbyeong Geupsangeum(蒼玉屛及散襟)" written in an old prose tells us that the high rock wall with Sangeumdae inscribed on the rock might be the rock wall of Changokbyeong. In addition, while not a single rock inscription has been found on the Ogari Stone Wall, 11 rock inscriptions designed and ordered by Saahm Park Soon, the Subject of Jouissance, are found on every corner of the high rock wall standing in front of Okbyeng seowon, 8 of those 11 being place names and recitative poems(known as Jeyeongsi: 題詠詩) in close formation resembling the handwritings in a little notebook. This provides a strong evidence for assuming the location of Changokbyeong to be the frontal river terrace of Okbyeng seowon. The "Songgyun Jeoljo Suwol Jeongshin(松筠節調 水月精神)" rock inscription on Changokbyeong should be considered as the stamping ground and as the symbolic language of Changokbyeong that bears the high character and nobility of the Subject of Jouissance, Saahm Park Soon. The inscription should also be recognized as the handwritings of Wooahm Song Si-Yeol(尤庵 宋時烈) correcting the misconceptions that persisted until today. Meanwhile, the garden remains of Saahm's Changokbyeong are composed of four sites: Sangeumdae-Sugyeongdae-Cheonghakdae-Baekhakdae from the left. At the back of Sangeumdae, there is the original house, the Baegyeonwa(拜鵑窩), and on the fantastically shaped stone wall at the left of Baekhakdae, there is the annex, the Iyangjung, together creating a landscape composition that overlooks the splendor of the Ogari Stone Wall. The Iyangjung is located on the highest spot to the left of the four sites, and it is believed to have been a little outhouse and library for Saahm which remains to the present day as a place where Saahm's character can be felt. The drinking plates[窪樽] made of rock that are affectionately arranged on the broad flat rock in front of Iyangjung is part of the garden remains that reflects the artistic taste of Saahm regarding the drinking culture at the time.

• Journal of the Korean Geographical Society
• /
• v.30 no.3
• /
• pp.230-241
• /
• 1995

The Characteristics of nocturnal temperature fields were analyzed to understand the factors of freezing-and-cold damages on orange orchards in Cheju Island. Temperatures were measured from January 7th through 27, 1995 at 25 sites in an area of 1x1.25$ extrm{km}^2$, Wasan-ri, Chochon-up, Pukcheju-kun located on the northeastern slope of Mt.Hanla. Several other weather elements such as wind and cloud were observed as supplementary data. Surface weather maps were also analyzed to clarify the influence of prevailing pressure patterns on the temperature fields. The vertical temperature profiles were obtained at the height from the ground up to 360 cm in 30 cm intervals at site 3, a frost hollow, and site 10 on the upper slope. The results show that freezing damages occured in the hollows, terrain depressions, rather than at the upper slope due to nocturnal radiation cooling as well as accumulation of cold airflow from Mt.Hanla. Windbreaks of densely planted Japanese ceders with stone-walls also roled as obstacles to the cold airflow in nights with Clear skies and light winds. The maximum intensity of temperature inversion in hollows, quasi-cold air lake, was 3.1$^{\circ}C$. Cold air from Mt.Hanla was trapped in the depressions up to a height of 90cm forming frost pocket. Man-made facilities such as shelterbelt or stone-wall which are built to prevent the penetration of cold north-westeries in winter aggravated the cold damage. The differance of daily minimum temperatures between before and behind shelterbelts was 2.$0^{\circ}C$. The man-made convection by smudgin which raised the temperatures up to 3.8$^{\circ}C$ can reduce the cold damage in the hellows.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.439-450
• /
• 2009

The purpose of this study is to find out characteristics of the fillers made by epoxy resin (L-30) and filling epoxy resin (L-50) with talc, quartz sand and wollastonite with different mixture ratio of 5%, 50%, 80%, 120%, and 150%. The viscometer and colorimeter were used to measure the viscosity and chromaticity of the fillers. Additionally, IC and SEM were used to reveal characteristics of the filler, and checked ultrasonic wave velocity, compressive strength and contact angle to estimate the stability between the filler and stones which are essential for conservation treatments. The filler mixed with the talc had the lowest value in the ultrasonic wave velocity analysis, and its compressive strength decreased as the mixing rate of talc increased. On the other hand, wollastonite had higher values than others in the ultrasonic wave velocity and the compressive strength regardless of epoxy resin type, also, these values increased as mixing rate increased. The properties of the filler, which include the granularity and shape, have influence on characteristics of the stone conservation adhesives. Thus, the filler type, characteristic, and mixture ratio must be considered for effective conservation treatment.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.385-392
• /
• 2005

The object of this study is to prove the quality and reliability of recycled aggregate concrete by finding a way to improve the durability of the material through the experiment on the accelerated carbonation, freezing and thaw, and drying shrinkage, analysing the influence on the durability to Promote more active use of recycled aggregate concrete. The result of study as follows. (1) Resistibility to the freeze and thaw of the recycled aggregate concrete showed relative dynamic modulus of elasticity over $90\%$ which is very good, and all cycles show $99.2{\~}91.0\%$ dynamic modulus of elasticity which is improved compared with the $97.5{\~}90.6\%$ relative dynamic modulus of elasticity of ordinary concrete made of broken stone. (2) Carbonated thickness of the recycled aggregate concrete and the normal concrete was similar or it appeared with the tendency which it diminishes more or less. (3) Length change rate in drying contraction of the recycled aggregate concrete made of the recycled aggregate was lower than the ordinary concrete made of the broken stone by $18.5{\~}3.9\%$ in all blending.

• Archives of design research
• /
• v.14 no.2
• /
• pp.197-207
• /
• 2001

A designed object reveals its meaning and image through form, color and material. Among these three elements, material has more powerful influence with its tactile and visual characteristics. In Korea, traditionally materials itself were mainly used to design artifacts rather than various color or formal decoration. The purpose of this study is to investigate the Korean traditional materials, and to classify them by the characteristics of their texture. For this study, the pictures of Korean traditional artifacts were collected from the national museums and literature. Those are architectural and interior elements, furniture, cloths and textiles, arts and crafts. Total of 533 collected artifacts were classified into seven categories, metal, day, stone, paper, wood, straw, fabric things. : 59 metal things, 115 clay things, 62 stone things, 73 paper things, 80 wood things, 47 straw things, 97 fabric things. Each materials were classified into its forming methods and surface treatment focused on the he characteristics of their surface texture. Throughout this study, the uniqueness of forming method and surface treatment of each materials in Korea has been clarified. And furthermore the classification by this various traditional methods of materials will provide plentiful information and ideas to today's designers of the world.