• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.20-20
• /
• 2021

하천에서 유해화학물질 유출사고로 인하여 오염물질이 유입되었을 경우, 이에 대응하기 위하여 오염운의 도달시간과 농도를 예측하는 것은 매우 중요하다. 종방향의 혼합거동이 중요한 넓은 범위의 하천을 대상으로 오염물질의 이송을 예측하기 위하여 일반적으로 1차원 Fickian 모형을 사용한다. 그러나 실제 하천에서 오염물질의 농도를 측정하였을 경우, 대부분의 농도분포는 오염물질의 저장대효과로 인하여 긴 tail 부분을 갖는 왜곡된 분포를 갖게 된다. 이러한 저장대 효과는 여러 하천내의 다양한 불규칙성으로부터 발생하나, 국내 하천에 많은 보가 설치되어 있음에도 불구하고 하천 내부에 설치된 수리구조물에 의하여 발생하는 인공적인 저장대 효과에 관한 연구가 미흡한 실정이다. 따라서 본 연구에서는 실내 수리실험과 수치 모의를 통하여 노치가 존재하는 보주변에서의 흐름 특성과 오염 물질의 이송 특성을 규명하고, 이를 통해 보의 지형 및 수리적 인자가 저장대 메커니즘에 미치는 영향을 분석하였다. 수리 실험을 통한 넓은 범위에서의 수평방향 흐름장과 농도장을 측정하기 위하여 본 연구에서는 광역 계측방법인 Large Scale Particle-Image-Velocimetry (LSPIV) 기법과 Planar-Concentration-Analysis (PCA) 기법을 각각 유속과 농도 측정을 위해 적용하였다. 더 많은 보의 지형 및 수리적 조건에 따른 저장대 메커니즘을 분석하기 위하여 3차원 Reynolds-averaged Navier-Stokes (RANS) 모형을 통해 모의조건을 확장 적용하였다. 측정 및 모의 결과를 바탕으로 노치가 존재하는 보의 지형 및 수리적 인자가 저장대 메커니즘에 미치는 영향을 분석하였다. 저장대 영역 면적의 크기는 노치사이의 간격이 증가할수록 증가하였으며 노치의 높이의 경우에는 크게 민감하지 않은 경향을 나타냈다. 추적물질의 체류 시간은 노치사이의 간격과 보의 높이가 증가할수록, 유량이 감소할수록 증가하여 질량교환계수 값이 감소하는 경향을 나타냈다. 프루드 수와 레이놀드 수 모두 질량교환계수와 양의 상관 관계를 나타냈으나 저장대 영역의 면적의 크기와는 낮은 관계성을 나타냈다.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.9
• /
• pp.33-40
• /
• 2022

Sedimentation and pH neutralization has been investigated as preteatment of acid contaminate water. The settling and neutralizing process derive more effective degradation efficiency as the pre-treatment process before the removal process of adsorption, volatile, biodegradation, or oxidation. Settling velocity, uniformity coefficient, coefficient of curvature, and grain size index can define in the sedimentation process for characteristics of the soil. The stainless steel sieve has been used to separate each particle size of the dry soil by assembling in order of 4, 10, 20, 40, 80, 100, and 200 mesh sizes. The soil from Gamcheon Port in Busan drops upper side of the sieve and shakes back and forth to separate each different size of the particle. The 1L of Imhoff cone and 200 mL of the mass cylinder were used as settling tanks to calculate settling velocity. Stokes' equation was used to figure out the average density of dry soil with a value from settling velocity. In the results, the average particle density and lowest settling velocity were 1.93 g/cm³ and 0.11 cm/s, respectively. These values can detect the range of settling points of sediment to prevent chemical accidents. In pH neutralization, the initial pH of 2, 3, 4, and 5 of nitric acid and sulfuric acid are used as an acid solution; 0.1, 0.01, and 0.001 M of sodium hydroxide and calcium hydroxide are used as a base solution. The main goal of this experiment is to figure out the volume percentage of the acid solution becomes pH 7. The concentration of 0.001 M of base solution exceeds all the conditions, 0.01 M exceeds partially, and 0.1 M does not exceed 5 v/v% except pH 2. Calcium hydroxide present less volume than sodium hydroxide at pH neutralization both sulfuric and nitric acid.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2386-2396
• /
• 1996

A numerical simulation has been performed for isothermal and reacting flows in an exisymmetric, bluff-body research combustor. The present formulation is based on the density-weighted averaged Navier-Stokes equations together with a k-epsilon. turbulence model and a modified eddy-breakup combustion model. The PISO algorithm is employed for solution of thel Navier-Stokes system. Comparison between measurements and predictions are made for a centerline axial velocities, location of stagnation points, strength of recirculation zone, and temperature profile. Even though the numerical simulation gives acceptable agreement with experimental data in many respects, the present model is defictient in predicting the recoveryt rate of a central near-wake region, the non-isotropic turbulence effects, and variation of turbulent Schmidt number. Several possible explanations for these discrepancies have been discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.169-169
• /
• 2015

유사 입자의 크기는 유사의 특성 및 그에 따른 거동 변화에 중요한 영향을 미친다. Stokes 침강 속도 모형에서 유사의 침강 속도에 가장 많은 영향을 주는 인자는 유사의 크기인 것 또한 확인된다. 유사 입자의 크기가 약 $60{\mu}m$보다 작은 유사들은 알갱이 사이의 점착력을 무시할 수 없다. 이로 인해 유사들은 응집 현상을 겪으며 입자 본래의 크기보다 크기가 큰 플럭을 형성하는 점착성 유사로 분류된다. 응집 현상이란, 흐름 내 점착성을 띠는 일차입자(Primary Particle)가 응집과 파괴를 반복하며 플럭을 형성하는 현상을 뜻한다. 입자 간의 충돌을 통해 응집이 진행되며 난류 전단으로 인해 형성된 플럭의 파괴가 발생한다. 많은 연구에서 점착성 유사의 충돌을 야기하는 가장 지배적인 원리는 난류라 알려져 있다. 이러한 응집 현상으로 인하여 플럭의 크기와 밀도는 지속적으로 변화를 겪으며 비점착성 유사와 다른 특징들을 보인다. 흐름에 존재하는 유사의 이동은 이송-확산 방정식을 통해 표현된다. 이송-확산 방정식은 시간 변화에 따른 농도의 변화를 입자의 침강과 난류 및 유사 자체의 특징에 의한 확산으로 해석한다. 침강속도로 대변되는 이송과 달리, 확산은 난류흐름 내에서 유사가 확산되는 정도를 정량화하기 위한 인자가 요구된다. 난류에 의한 유사의 확산은 유사 자체 특성에 따른 물질 확산에 비하여 매우 큰 값을 가지며, 이를 확산 계수로 개념화 한다. 확산계수는 와점성계수와 Schmidt 수(${\sigma}_c$)의 비로 정의된다. ${\sigma}_c$는 난류의 점성과 난류로 인한 부유과정에 의해 유사가 확산되는 정도를 나타낸다. 이에 따라 ${\sigma}_c$의 변화가 유사의 부유 및 침강거동에 많은 영향을 미칠 것이라 판단되나, 국내외에서 수행된 연구 동향에서는 ${\sigma}_c$를 0.5부터 1.0 사이의 상수를 적용하여 수행되었다. 이에 본 연구에서는 ${\sigma}_c$의 크기에 따라 달라지는 유사의 부유 및 침강 변화에 의한 총 부유량을 살펴보고자 한다. 유사의 점착성을 고려할 수 있는 1DV 수치 모형을 이용하여 비점착성 유사와 점착성 유사를 대상으로 수치연구를 수행하며, 유사의 크기 및 ${\sigma}_c$의 변화에 따른 총 부유량 경향을 살펴본다. 그 결과, 점착성 유사는 ${\sigma}_c$의 증가에 따라서 유사의 총 부유량이 증가하는 현상이 나타난 반면 비점착성 유사는 ${\sigma}_c$의 증가에 따라 유사의 총 부유량이 감소하는 경향이 나타났다. 그러나 크기가 아주 작은 비점착성 유사를 대상으로 수치 연구를 수행한 결과, ??에 따른 총 부유량의 경향은 유사의 점착성에서 기인하는 것이 아닌 입자의 크기로부터 야기되는 특성이라는 결론이 도출되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6C
• /
• pp.267-274
• /
• 2012

The conventional approach to evaluate the contaminant transport in soils adopts the macro-scale implementation while the pore configuration and network is a dominant factor to determine the fate of contaminant. However, the observation of fate and transport at pore scale may not be readily approachable because of the computational expenses to solve Navier-Stokes equation. We herein present the 2D Lattice-Boltzmann method that enables to assess the local fluid velocity and density efficiently for the case of single phase and multi-components. The solute fate spatio-temperal space is explicitly determined by the advection of fluid flow. Two different types of idealized pore space provides the path of fluid. Also, solute transport, the velocity field and average concentration of solute are computed in steady state. Results show that the pore geometry such as tortuosity mainly affect the solute fate. It highlights the significance of the pore configuration and shape in granular soils and rock discontinuity in spite of the equivalent porosity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.1
• /
• pp.79-92
• /
• 1984

The analysis of total load was carried out by using the theory of unit stseam power (USP). The dimensionless USP equation of $S_R$ which was the rate of suspended load and bed load was derived from the USP function by applying the Einstein's reference concentration and Stokes' fall velocity. And the R relationship between the water discharge and Reynolds number (Re) was discussed, and it was shown that USP was closely related with Re. The value of $S_R$ was determined from the experimental data of Han River downstream and Mantz. And it was tested to several observatories of Korean Rivers. A good correlation among USP, suspended load and $S_R$ was shown and USP was increased with the increment of the turbulent intensity. Judging from the above results, it is considered this study can be contributed to estimate the total load.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.1
• /
• pp.72-78
• /
• 2008

In this study, advanced (fluid-structure interaction (FSI)) analysis system has been developed in order to predict turbine cascade performance with blade deformation effect due to aerodynamic loads. Intereference effects due to the relative movement of the rotor cascade with respect to the stator cascade are also considered. Reynolds-averaged Navier-Stokes equations with one equation Spalart-Allmaras and two-equation k-ω SST turbulence models are solved to accurately predict fluid dynamic loads considering flow separation effects. A fully implicit time marching scheme based on the (coupled Newmark time-integration method) with high artificial damping is efficiently used to compute the complex fluid-structure interaction problem. Predicted aerodynamic performance considering structural deformation effect of the blade shows somewhat different results compared to the case of rigid blade model. Cascade performance evaluations for different elastic axis positions are importantly presented and its aeroelastic effects are investigated.

• Journal of Korean Traditional Oncology
• /
• v.14 no.1
• /
• pp.45-52
• /
• 2009

Lung cancer is the most common primary tumor of brain metastasis. Metastasis to the brain is a frequent complication of non-small cell lung cancer (NSCLC) occuring in 12 ~ 18% of patient. The incidence of brain metastasis is rising because of longer survival of cancer patients as a result of the increase in early diagnosis of primary tumors and aggressive management, and improvements in imaging quality and accessibility such as widespread use of MRI. The most common symptoms are gradual onset of headache, focal weakness, and mental changes. Surgery, chemotherapy, radiotherapy and steroid therapy are treatment of NSCLC with brain metastasis. We report a patient with NSCLC metastasis to the brain. This patient underwent chemotherapy, radiotherapy and steroidtherapy. However, the patient requested oriental medical treatment for the patient's continuous headache and disease. We administered Banhabaekchulchoenma-tang gagambang with Allergen-removed Rhus Verniciflua Stokes(aRVS). The patient showed remarkable improvement in terms of frequency and severity of headache. Further study will be needed in order to determine the long-term effectiveness of oriental medical treatment on cancer patient with headache.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.321-327
• /
• 2008

Performance characteristics of the axi-symmetric supersonic exhaust diffuser (SED) with a second throat are numerically investigated. Computational strategy repeats those for a straight exhaust diffuser with zero-secondary flows. Renolds-Average Navier-Stokes equations with a standard ${\kappa}-{\varepsilon}$ turbulence model incorporated with standard wall function are solved to simulate the diffusing evolutions of the nozzle plume. The methodology is validated with accuracy. To predict the improvement of starting performance by second throat diffuser, diffuser characteristic curve due to the SED equipped with the second throat is speculated with respect to that of a straight area type as a function of nozzle stagnation pressure. Principal physics caused by the of the second throst is also addressed in terms of a second throat area ratio.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.9
• /
• pp.843-850
• /
• 2010

This In this paper, we describe the performance characteristics of a turbo blower as a function of the shape of the volute casing: expansion diameter and width of the volute casing. The turbo blower considered in the present study is mainly used in a refuse collection system. The flow characteristics inside the turbo blower were analyzed by a three-dimensional Navier-Stokes solver and compared with experimental results. The distributions of pressure and efficiency obtained by numerical simulation were in good agreement with those determined experimentally. Throughout the numerical simulation of the turbo blower, the blower performance was enhanced by decreasing the local losses in the blade passage and the outlet flow. The efficiency and pressure for the design flow condition were enhanced by about 3% and 2%, respectively, compared to the efficiency and pressure of the reference blower. Detailed flow analysis was performed using the results of the numerical simulation