• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.263-266
• /
• 2005

Recently, many researches for high-strength and high-durability concrete structure have remarkably been studied by adopting new construction material, fiber reinforced polymer (FRP). In connection with these research trend, the shearing capacity of concrete beams reinforced by GFRP stirrup which is developed in this study was evaluated. Experimental variables are span to depth ratio and spacing of shear reinforcement for test. In the result of test, the crack pattern, failure mode and shear load between shear steel reinforcement specimen and GFRP stirrup reinforcement specimen showed similar structural tendency. Therefore, it was investigated that the adaptability of shear-reinforced concrete structure with GFRP stirrup will be improved with further researches of shear design variables.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.53-56
• /
• 2011

This study is concerned with the SL shear reinforcement that it can be installed easily in filed as product at the factory and seismic performance can be achieved. The method of study is as follows. first, we researched constructability and economy of existing method. Secondly, we made specimen and were examined structural performance tests in order to verify the performance of the shear reinforcement. Shear strength of HILL01-HILL03 specimen applied to SL shear reinforcement increased about 5-14% when compared with the applied shear stirrup reinforcing existing specimens. Also, the amount of the maximum deflection of the central sub-section of HILL01-HILL03 specimen applied to SL shear reinforcement decreased about 41-42% when compared with the applied shear stirrup reinforcing existing specimens. As a result, developed SL shear reinforcement increased in shear strength and stiffness of reinforcement, structural safety is judged to be increased.

• Earthquakes and Structures
• /
• 제18권1호
• /
• pp.15-25
• /
• 2020

The seismic behaviour of reinforced concrete (RC) columns made from high-strength materials was investigated experimentally. Six high-strength concrete specimen columns (1:4 scale), which included three with high-strength stirrups (HSSs) and three with normal-strength stirrups (NSSs), were tested under a combination of high axial and reversed cyclic loads. The effects of stirrup strength and the ratio of transverse reinforcement on the cracking patterns, hysteretic response, strength, stiffness, ductility, energy dissipation and strain of transverse reinforcement were studied. The results indicate that good seismic behaviour of an RC column subjected to high axial compression can be obtained by using a well-shaped stirrup. Stirrup strength had little effect on the lateral bearing capacity. However, the ductility was significantly modified by improving the stirrup strength. When loaded with a large lateral displacement, the strength reduction of NSS specimens was more severe than that of those with HSSs, and increasing the stirrup strength had little effect on the stiffness reduction. The ductility and energy dissipation of specimens with HSSs were superior to those with NSSs. When the ultimate displacement was reached, the core concrete could be effectively restrained by HSSs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.403-406
• /
• 2005

This paper deals with the propriety of the shear test data with stirrup reported in ACI and ASCE structural journal and the shear resistance characteristics affected by compressive strength of concrere($f_{ck}$), shear span-to-depth ratio (a/d), tensile reinforcement ratio($\rho$), and shear reinforcement ratio($rho_{v}$). The analysis was accomplished by the 242 shear test data. The test data include the flexural failure data around 40$\%$.

• 콘크리트학회논문집
• /
• 제27권3호
• /
• pp.291-298
• /
• 2015

본 논문은 시공성과 내진성능을 증대하기 위해 고성능 강섬유를 혼합한 묶음대각철근 연결보를 제시한다. 연결보의 실험은 4개의 실험체로 구성하고 고성능 강섬유를 혼합한 실험체에 반복하중을 가하여 이력거동을 비교 평가하였다. 실험의 주요 변수는 강섬유의 혼합에 따라 대각철근의 묶음 여부와 스터럽의 철근량이다. 기준이 되는 실험체는 묶음대각철근에 ACI318에서 요구하는 스터럽의 철근량을 100% 적용하였다. 이와 함께, 동일한 묶음대각철근을 적용한 상태에서 스터럽의 철근량을 75%와 50%로 조절하여 두 실험체를 추가적으로 만들고 일반대각철근을 고려, 총 4개의 실험체가 제작되었다. 이번 실험에서 연결보의 콘크리트 타설시 고성능 강섬유를 함유율 1%로 혼합하였다. 모든 실험체는 1/2스케일로 형상비 3.5(l/h=1050/300)으로 이루어졌다. 본 실험결과에서 강섬유를 1% 혼입한 고성능 시멘트를 적용한 연결보는 스터럽 철근양을 75%, 50% 줄인 것과 기준실험체로 적용된 스터럽 철근양 100%의 강도 및 강성, 에너지소산능력에서 큰 차이를 보이지 않았다.

• 콘크리트학회지
• /
• 제8권6호
• /
• pp.173-182
• /
• 1996

이 연구에서는 콘크리트 보의 전단거동에서 콘크리트 압축강도가 스터럽 유효성에 미치는 영향을 실험적으로 연구하였다. 이를 위하여 단며이 $300{\times}600mm$ 인 수직 스터럽이 배근되지 않은 콘크리트 보 4개와 수직 스터럽이 배근된 콘크리트 보 20개에 대하여 실험을 수행하였다. 주요 실험변수는 2종류(보통강도, 고강도)의 콘크리트 압축강도 수준과 6종류의 전단철근비이다. 실험에 앞서 주어진 단면과 가정된 재료 상수에 대하여 ACI Building Code를 사용하여 휨파괴가 유발되는 전단철근비( ${\rho}_vACI$)를 산정하였으며, 이 값을 기준으로 6종류의 전단철근비를 선택하였다. 실험결과, 스터럽이 배근되지 않은 콘크리트 보에 있어서 ACI 전단강도식의 안전율은 콘크리트의 압축강도가 증가함에 따라 감소하는 것으로 나타났다. 그러나 스터럽이 많이 배근된 고강도 콘크리트 보에서는 보통강도 콘크리트 보 이상의 안전율이 확보되는 것으로 나타나 스터럽 유효성은 고강도 콘크리트 보에서 더 큰 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.26-29
• /
• 2006

A flat plate-column connection is susceptible to brittle punching shear failure, which may result in the necessity of shear reinforcement. In present study, experimental tests were performed to study the capacity of slab-column connections strengthened with lattice, stud rail, shear band and stirrup under gravity and cyclic lateral load. Among them, the capacity of the specimens with lattice are superior to the others due to the truss action of the lattice bars and dowel action of the longitudinal bars as well as the shear resistance of the web re-bar. On the other hand, the strengths of the specimens with stud rail, shear band and stirrup are lower than the estimated strength by the ACI, therefore design formulas of the ACI are needed to revise.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.351-363
• /
• 2020

Based on the dynamic tests of recycled aggregate concrete (RAC) short columns confined by the hoop reinforcement, the dynamic failure mechanism and the mechanical parameters related to the constitutive relation of confined recycled aggregate concrete (CRAC) were investigated thoroughly. The fracturing sections were relatively flat and smooth at higher strain rates rather than those at a quasi-static strain rate. With the increasing stirrup volume ratio, the crack mode is transited from splitting crack to slipping crack constrained with large transverse confinement. The compressive peak stress, peak strain, and ultimate strain increase with the increase of stirrup volume ratio, as well as the increasing strain rate. The dynamic confining increase factors of the compressive peak stress, peak strain, and ultimate strain increase by about 33%, 39%, and 103% when the volume ratio of hoop reinforcement is increased from 0 to 2%, but decrease by about 3.7%, 4.2%, and 9.1% when the stirrup spacing is increased from 20mm to 60mm, respectively. This sentence is rephrased as follows: When the stirrup volume ratios are up to 0.675%, and 2%, the contributions of the hoop confinement effect to the dynamic confining increase factors of the compressive peak strain and the compressive peak stress are greater than those of the strain rate effect, respectively. The dynamic confining increase factor (DCIF) models of the compressive peak stress, peak strain, and ultimate strain of CRAC are proposed in the paper. Through the confinement of the hoop reinforcement, the ductility of RAC, which is generally slightly lower than that of NAC, is significantly improved.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.131-138
• /
• 2001

In inverted T-shape composite beam examine the structural behavior by experiment According to arrangement, type of stud connector, type of shear connector, reinforcement by welding of stirrup and a close analysis we came to these conclusion. 1) The compare result of bending strength according to arrange type of stud connector : A1-W(stud connector located web)specimen is exceed than A1-F(stud connector located flange). 2) B1-N(using prominence and depression of the web by shear connector) specimen is decrease than A1-W(using stud bolt by shear connector)specimen in bending strength and B2-N(reinforced by welding the stirrup to lower flange)specimen is similar with A2-W specimen. 3) According to reinforced by welding the stirrup to flange, the stiffness and bending strength of the beams are increase. A-scries stirrup comparatively low effective in the increase of strength by welding the stirrup to flange because enough composite effect show by stud connector, but B-series stirrup is comparatively high effective in shear connector effect because shortage of prominence and depression of the web.

• 한국강구조학회 논문집
• /
• 제28권1호
• /
• pp.1-12
• /
• 2016

본 연구에서는 스터럽 보강 선설치 앵커의 정적 전단하중에 대한 저항강도 평가를 위한 실험 연구를 수행하였다. 실험변수로는 전면지압철근 유무와 콘크리트 균열 유무로 설정하였다. 앵커는 M36, 연단거리는 180mm로 하였다. 모든 철근은 HD-10 철근을 사용하고 스터럽의 간격은 100mm로 하였다. 실험으로부터 전면지압철근을 설치한 경우 스터럽 저항강도는 16% 증가하였다. 한편 균열 콘크리트에서의 저항강도는 비균열 콘크리트에 비해 5% 감소에 불과하였다. 실험 결과로부터 ACI 318 및 ETAG 001 기준은 스터럽의 저항강도를 안전측으로 평가하였으며, 적절한 강도 평가 방안을 제안하였다. 마지막으로 스터럽 보강 시 앵커 본체의 파괴강도에 대한 고찰을 제시하였다.