• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.565-571
• /
• 2011

Because most fatigue cracks in wheel and rail take place by rolling contact of wheel and rail in railroad industry, it is critical to understand the rolling contact phenomena, especially for the three-dimensional situation. This paper presents an approach to steady-state rolling contact problem of three-dimensional contact bodies, with or without tangential force, based on the finite element method. The steady-state conditions are controlled by the applied relative slip and tangential force. The three-dimensional distribution of tangential traction and contact stresses on the contact surface are investigated. Results show that the distribution of tangential traction and contact stresses on the contact surface varies rapidly as a result of the variation of stick-slip region. The tangential traction is very close in form to Carter's distribution.

• 한국음향학회지
• /
• 제35권3호
• /
• pp.183-191
• /
• 2016

자동차의 저소음 보기류 구동 시스템을 개발하는 체계적인 방법론이 전산해석과 리그 실험을 통해 제시되었다. 벨트 구동 소음 예측의 두 가지 난제는 1) 벨트와 풀리 접촉면에서의 스틱-슬립 비선형성과 2) 벨트 구동 시스템과 파워트레인 회전진동계와의 연성이다. 본 연구에서는 최근 개발된 해석 방법을 이용하여 벨트 구동시스템과 엔진 회전진동계를 통합한 해석 모델을 구축하였고, 다양한 파워트레인 운전 조건에서 정합성을 확보하였다. 통합 모델을 이용하여 스틱-슬립 소음이 발생하는 벨트 시스템을 개선할 수 있음을 확인하였다. 또한 새로운 방법론을 통해 신엔진 개념설계에서 NVH (Noise, Vibration and Harshness), 기능, 연비 등을 고려한 개념 설계안을 제시하였다.

• 폴리머
• /
• 제37권5호
• /
• pp.642-648
• /
• 2013

이상소음은 고분자 판재가 상호간에 미끄럼 운동을 할 때 마찰에 의한 스틱-슬립 메카니즘에 의하여 발생한다. 본 연구에서는 실험적 방법을 통하여 이상소음을 줄이기 위하여 가전제품에 많이 사용되는 ABS, PP, MIPS, POM 고분자 소재에 대하여 ABS를 기초로 하여 소재간의 조합이 이상소음에 미치는 영향을 알아보았다. 소재간 마찰에 의한 이상소음을 평가하기 위한 실험방법과 장치를 제안하였으며, 실험변수로는 소재의 조합뿐만 아니라 고분자 판재의 표면 거칠기, 수직 접촉하중, 상대운동 속도 등을 두었다. 본 연구를 통하여 이상소음 저감을 위해서 ABS 소재와 POM 소재 조합이 가장 좋음을 알 수 있었으며, 다른 재료조합에 대한 결과도 상호 비교하였다.

• 한국음향학회지
• /
• 제41권4호
• /
• pp.389-396
• /
• 2022

본 논문은 냉장고 수축팽창 소음의 원인 및 메커니즘을 파악하고 소음 감소 방법을 제안한다. 냉장고에서 발생하는 수축팽창 소음은 주로 내부부품 사이의 접촉면에서 발생하는 스틱슬립 현상에 의한 것이다. 스틱슬립 현상을 일으키는 요인을 규명하기 위해 마찰실험이 수행되었다. 또한 내부부품의 진동레벨을 측정하여 수축팽창 소음의 특성 및 위치를 규명하였다. 실험 결과를 바탕으로 요인별 소음 특성을 검증하는 실험이 진행되었다. 이를 통해 마찰실험과 냉장고 수축팽창 소음 발생 위치와 빈도가 동일한 것을 확인하였다. 하중적재로 수직력이 증가하면 진동레벨도 증가하였다. 또한 표면거칠기를 증가하였을 때 수축팽창 소음이 저감되는 것으로 확인되었다. 따라서, 마찰실험 결과와 동일하게 접촉면의 표면거칠기를 증가하는 것이 수축팽창 소음저감 방법이라는 결론을 도출하였다.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.511-518
• /
• 1997

The technique of fretting fatigue test was developed and fretting fatigue tests of A12024-T4 were conducted under several conditions. The newly developed calibration methods for measuring surface contact tractions showed good linearity and repeatability. The plate type specimen to which tow bridge type pads were attached and vision system was used to observe the crack behaviour. The oblieque cracks appeared in the early stage of crack growth and they became mode I cracks as they grow about 1 mm. The mode I transition points were found to be longer when surface tractions are higher or bulk stress is lower. Before the crack becomes mode I crack, 'well point' where crack grow about rate is minimum, was detected under every experimental condition. The crack behaviour was found to be affected by surface tractions, contact area, bulk stress. It was also found that partial slip and stick condition is most detrimental and the crack starts from the boundary of stick and slip. For gross slip crack started at the outside edge of pad. After crack mode transition, fretting fatigue cracks showed almost same behaviour of plain mode I fatigue cracks. Equivalent stress intensity factor was used to analyze the behaviour of fretting fatigue cracks and it was found that stress intensity factors can be applied to fretting fatigue cracks.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.88-94
• /
• 1998

The fretting wear characteristics of Zircaloy-4 tube in light water were investigated experimentally. A fretting wear tester was designed to be suitable for this fretting test. This study was focused on the effects due to the combination of normal load, slip amplitude and number of cycles as the main factors of fretting. The results of this study showed that the wear volume increased abruptly at slip amplitude above 100 ${\mu}{\textrm}{m}$, which is defined as critical slip amplitude of Zircaloy-4 tube in light water, and that under 160 ${\mu}{\textrm}{m}$ the wear volume decreased as load increased at the same slip amplitude.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.55-63
• /
• 1998

The fretting wear characteristics of Zircaloy-4 tube in light water were investigated experimentally. A fretting wear tester was designed to be suitable for this fretting test. This study was focused on the effects due to the combination of normal load, slip amplitude and number of cycles as the main factors of fretting. The results of this study showed that the wear volume increased abruptly at slip amplitude above 100$\mu$m, which is defined as critical slip amplitude of Zircaloy-4 tube in light water, and that under 160$\mu$m the wear volume decreased as load increased at the same slip amplitude.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.376-377
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1589-1590
• /
• 2013

• Tribology and Lubricants
• /
• 제23권6호
• /
• pp.266-271
• /
• 2007

The brake performance of sintered friction materials for the high speed train was studied. In this study, newly developed sintered materials based on copper were compared with the commercial products for high speed trains. They were tested on a 1/5 scale dynamometer using low carbon steel disks. Effectiveness, fade, and recovery tests were carried out to examine friction performance and the change of disk thickness variation (DTV) during brake applications and noise propensity were also evaluated. Results showed that the two sintered friction materials exhibit similar friction coefficients and braking performance, whereas the newly developed friction material was superior in terms of DTV generation and noise propensity to the commercial friction material. The improvement of the newly developed friction material was attributed to the high graphite content which reduced the stick-slip phenomena and prevented uneven disk wear by producing friction films on the counter disk.