• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.23-23
• /
• 2023

The Hairy labrador tea (Ledum palustre L. var. diversipilosum Nakai) is a evergreen small shrub, belonging to the Ericaceae and mainly distributed along the alpine areas of Hamgyeong-do in North Korea. Through seed physiological research on North Korean plants, we intend to obtain basic data for the development of mass propagation methods and use them for vegetation restoration. The internal and external morphological characters of the seed were observed using scanning electron microscopy or stereoscopy, and full seeds were selected through X-ray test. Seeds were cultured on a growth condition at 15/6℃ and 25/15℃ to examine the germination response according to temperature, and the number of germinated individuals was examined every 24 hours to calculate germination percentage and mean germination time. Low-temperature treatment (4℃) and hormone treatment (GA3) were performed to investigate the effect of dormancy breaking, and analysis of variance (ANOVA) was performed on the experimental results using SAS 9.4. The seeds of the Hairy labrador tea were elliptical-narrow in shape, and the epidermal cell wall pattern was reticulated. The final germination rate (FGP) was the highest at 58.9% under the condition of low temperature treatment at 25/15℃. The average number of days to germination (MGT) was the highest at 25.1 days without treatment at 15/6℃, and the average of the last germination days was confirmed to be about 13 days. As a result of low temperature treatment, it was confirmed that the final germination rate (FGP) increased by 43.3%. The significance of the final germination rate (FGP) was verified according to the pretreatment at 25/15℃.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.363-373
• /
• 2012

This paper proposes a method to generate a depth image at an arbitrary intermediate view-point, which is targeting a video service for free-view, auto-stereoscopy, holography, etc. It assumes that the leftmost and the rightmost depth images are given and they both have been camera-calibrated and image-rectified. This method calculates and uses a disparity increment per depth value. In this paper, it is obtained by stereo matching for the given two depth image by considering more general cases. The disparity increment is used to find the location in the intermediate view-point depth image (IVPD) for each depth in the given images. Thus, this paper finds two IVPDs, from left image and from right image. Noises are removed and holes are filled in each IVPDs and the two results are combined to get the final IVPD. The proposed method was implemented and applied to several test sequences. The results revealed that the quality of the generated IVPD corresponds to 33.84dB of PSNR in average and it takes about 1 second to generate a HD IVPD. We evaluate that this image quality is quite good by considering the low correspondency among the left images, intermediate images, and the right images in the test sequences. If the execution speed is improved, the proposed method can be a very useful method to generate an IVPD at an arbitrary view-point, we believe.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.17-25
• /
• 2012

Purpose: Recently, a three dimensional approach to hard and soft tissues of the maxillofacial area has been widely used. This study was to evaluate the reproducibility and accuracy of a stereocamera compared to actual measurement methods using a digital caliper and digitizer. Methods: The stereoscopies of 7 head dummies with different sizes and shapes were obtained using a Di3D system (Dimensional Imaging, Glasgow, UK) after marking reference points on facial areas. From the obtained stereoscopy, 10 measurements representing the width, height and depth of each of the facial sections of the dummy were measured twice using a three dimensional reverse engineering software program (RapidForm$^{TM}$ 2006, Inus, Seoul, Korea). The x, y, and z coordinates of each of the three dimensional measurements were obtained and distances between two points were calculated. All procedures were repeated twice. The actual measurement method was performed twice, directly on dummies, using a digital caliper and values were compared with the previously determined values. Results: The results were as follows. In the ANOVA analysis, there were no significant statistical differences among the three measurement methods. In the Bonferroni analysis, with adjustments applied for multiple comparisons, there was no difference between actual measurement methods using a digitizer and a digital caliper. However, there was some difference between using a stereocamera and actual measurement methods using a digitizer and a digital caliper in values of $Ex_{Rt}-Ex_{Lt}$, $En_{Rt}-En_{Lt}$, $Ala_{Rt}-Ala_{Lt}$, $Ch_{Rt}-Ch_{Lt}$, G-Pg', $Ala_{Rt}$-Prn, $Ala_{Rt}$-Prn. The mean value for technical error in measurement (TEM) in Di3D (0.98 mm) was slightly higher than for a digital caliper (0.17 mm) and a digitizer (0.30 mm). In an intraclass correlation coefficient (ICC) there were no significant differences among the three measurement methods, but the Di3D system with the stereocamera showed relatively lower reproducibility compared to actual measurement methods using a digitizer and a digital caliper. Conclusion: These results indicate that some complementary measures may be needed to improve accuracy and reproducibility in the Di3D system with stereocamera.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.193-213
• /
• 1995

The purpose of this study is to investigate a possible contribution of nonspecific esterases, which occur in the oral cavity, to the degradation of ester bonds in polymethacrylates. One of the problems connected with the use of composite resins for restorations is their inadequate resistance to wear. It has been shown that methacrylate hydrolysis can be catalyzed by enzymes and that a carboxylic hydrolase (porcine liver esterase) catalyzed the hydrolysis of several mono - and dimethacrylates. The softening effect on a BISGMA/TEGDMA polymer induced by hydrolase will accelerate the in vivo wear of the polymer. Porcine liver esterase (EC 3.1.1.1) 3.2 mol/L $(NH_4)_2$ $SO_4$ was obtained from Sigma Chemical Company. The esterase activity of one unit is defined as the amount of enzyme capable of hydrolyzing $l{\mu}mol$ ethyl butyrate per min at pH 8.0 AT $25^{\circ}C$. Phosphate buffer, 10mmol/L, pH 7.0, was made by adjustment of a solution of $Na_2HPO_4$ with $H_3PO_4$. Composite resins used in this study are Silux Plus, Z-100, Durafil VS, and Prisma APH. Cylindrical specimens, 14mm in diameter and 3mm thick, of Silux Plus, Z-100, Durafil VS, Prisma APH were polymerized under the celluloid strip. 60 specimens were divided into 2 groups. One group was emersed only in buffer solution, the other group was emersed in buffer and enzyme solution. Silux Plus and Z-100 were divided into 2 subgroups, one subgroup was cured only Visilux 2. And the other subgroup was cured Visilux 2 and Triaid II. Thereafter, specimens were polished to its best achievable surface according to manufacture's directions. The Vickers hardness of the specimens was measured after 1, 2, 4, 7, 9, 15, 50 days. The solutions were changed after each measurement. Composite resin surfaces were evaluated for the surface roughness with profilometer (${\alpha}$-step 200, Tencor instruments, USA) after 1 and 50 days. And then surfaces of specimens were pictured with stereosopy after 1 and 50 days. The results were as follows. 1. The surface hardness of Silux plus, durafil VS, and Prisma APH were decreased with time. But, the surface hardness of Z-100 was not decreased. 2. The surface hardness of all composite resins was decreased by esterase. 3. Composite resins, which were light-cured by Visilux 2 and concomitantly baked by oven, showed more hardened surface than light-cured by Visilux 2 only. 4. Significant surface changes were occured in Silux plus after esterase treatment.

• Applied Microscopy
• /
• v.42 no.1
• /
• pp.35-42
• /
• 2012

The skin is the largest organ of the integument system whose surface is closely related to many physiological and pathological conditions. The skin surface is closely related to functional status of the epidermis and dermis. The outermost surface of the skin shows characteristic pattern defined by small furrows are called micro-relief. The micro-relief change is according to physiological and pathological conditions of the skin. But, there is no data on health Korean skin micro-relief yet. This study presents some aspect of health Korean skin micro-relief from the twenties. The silicon replicas obtained from forearm, dorsum hand and finger were analyzed by profiles were accessed by stereoscopy. We measured density of furrow, width of furrow, and depth of furrow in micro-relief with sectioned silicon replica sample using stereoscope. Stereoscopic analysis showed that male group has a larger density of furrow and depth furrow in finger significantly. The densities of furrow were shown different not only between forearm and finger but also between finger and hand in male with female group. In conclusion, there were differences results between sex different and regional difference in skin replica profile. These quantitative data can be used for basis of further skin research for Korean.

• Cartoon and Animation Studies
• /
• s.22
• /
• pp.81-97
• /
• 2011

The technology of 'Virtual Reality' has placed in advanced tools for human beings' joy and anger together with sorrow and pleasure in our generation. It has recently tried in a variety ways to use as an implication for treatment in the field of Cognitive Psychology. Especially, it widely approaches to human in terms of that a sense of reality in a virtual world through the five senses should reinterpret the meaning of cognition in the real world. Based on this paradigm shift, it allows for new treatment using the technology of virtual reality. A typical example is a field of Therapy in order to overcome panic disorder. It has advantages that in particular development of flexible interaction technologies in a virtual space can lead patients to experience psychological environments rather than physical one. the interaction technology provides environments in which users' five senses can be actively stimulated, it is very useful that information from the experiences in the virtual world allows people to learn through real experiences by renewing potential energies, advantages of Virtual Reality Therapy can be customized treatment by depending on symptoms in patients with panic disorder and are capable of differentiate application for the cure at each stage. It is to treat by leading patients to get accustomed to environments and situations in real world through care process with each symptom and stage. It is helpful that based on A Human-Sensibility Ergonomics, technologies like immersive virtual reality equipment, force-relative feedback and stereophonic sound, and like stimulating the sense of smell make people to induce experiences by stimulating human's five senses. There are many advantages of immersion in virtual world in that the phenomenon such as challenge, interaction, reality, illusion, and cooperation is expanded. As an application for therapy by growing such augmented reality, virtual space and sharing of data through the Internet and also inexpensive its availability have recently expanded the base. There are other benefits of Virtual Reality Therapy offering active interaction environments for cognitive experience which can provide appropriately adjusted environments for patients who are hard to overcome the real situation because of phobia. In addition to that it is safe and economical and patients' confidentiality is assured. Moreover, due to the principles of applying real-time navigation the Virtual Reality Therapy makes modification and supplementation easier and also it can reduce cybersickness because of the supply of Lenticular allowing people to see stereoscopy without eyeglasses, which makes sense of presence clearer. On top of that due to the development of interactive technologies, it is becoming close to sense of reality similar to real world by leading users to navigate by themselves and to operate objects in a virtual space. This paper will therefore examine, although it is of limited, characteristics of application of virtual reality technology based on A Human-Sensibility Ergonomics used for treatment for a disorder. this paper will analyse a range of its application and problems and it will suggest the future possibilities.