• 한국방재학회 논문집
• /
• 제11권3호
• /
• pp.57-61
• /
• 2011

기후변화로 인하여 홍수, 태풍과 같은 대규모 자연재난이 전 세계적으로 발생하고 있으며, 이로 인하여 심각한 피해가 발생하고 있다. 특히, 현행 피해조사는 수작업으로 이루어지기 때문에 많은 시간이 소요되고 있으며, 또한 현장 조사자의 주관이 포함되어 정확성과 객관성이 부족하고 광범위한 피해지역이나 조사자가 접근할 수 없는 지역에 대한 피해조사가 어렵다. 따라서 신속 정확하고 객관적인 피해조사를 위하여 Stereo images와 IT기술을 이용한 피해조사 통합운영시스템을 개발하였으며, 2008년 경북 봉화군, 2009년 충북 제천시, 2010년 전북 남원시, 경남 합천군 피해현장에 대해 시범적용 하였다. 본 연구는 Stereo images와 IT기술을 이용하여 현장에서 휴대성과 안정성, 그리고 사용자 편의 등을 고려한 피해조사 통합운영시스템 개발과 현장운용결과에 대해 기술하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.96-99
• /
• 1987

In the way of perception and depth finding of 3-D scene stereo vision is one of the best ways. Matching is important problem of stereo vision. In this paper we develop an algorithm that is adaptable to errors and computation time. And we demonstrate the way of matching.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.181.5-181
• /
• 2001

This paper presents the method of 3D reconstruction of the depth information from the endoscopic stereo scopic images. After camera modeling to find camera parameters, we performed feature-point based stereo matching to find depth information. Acquired some depth information is finally 3D reconstructed using the NURBS(Non Uniform Rational B-Spline) algorithm. The final result image is helpful for the understanding of depth information visually.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.41.2-41
• /
• 2002

The stereo correspondence of two retinal images is one of the most difficult problems in stereo vision because the reconstruction of 3-D scene is a typical visual ill-posed problem. So far there still have been many unsolved problems, one of which is to reconstruct 3-D scene for a monochromatic surface because there is no clue to make a correspondence between two retinal images. We consider this problem with two layered self-organization neural network to simulate the competitive and cooperative interaction of binocular neurons. A...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.663-668
• /
• 1991

In order to navigate, mobile robot needs to avoid obstacles on his way. We describe a stereo vision method for detecting obstacles on the floor ground. With the knowledge of floor geometry, stereo images are transformed so that the relative views of obstacle to the floor are seen. After comparing the transformed images, obstacles information such as location and size are extracted and determined from the local disparities. Some experimental results are shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.541-541
• /
• 2000

This paper Presents the method of 3D reconstruction of the depth information from the endoscopic stereo scopic images. After camera modeling to find camera parameters, we peformed feature-point based stereo matching to find depth information. Acquired some depth information is finally 3D reconstructed using the NURBS(Non Uniform Rational B-Spline) algorithm. The final result image is helpful for the understanding of depth information visually.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.508-511
• /
• 2006

Generally, stereo pair images are necessary for 3D viewing. In the absence of quality stereo-pair images, it is possible to synthesize a stereo-mate suitable for 3D viewing with a single image and a depth-map. In remote sensing, DEM is usually used as a depth-map. In this paper, LiDAR data was used instead of DEM to make a stereo pair from a single aerial photo. Each LiDAR point was assigned a brightness value from the original single image by registration of the image and LiDAR data. And then, imaginary exposure station and image plane were assumed. Finally, LiDAR points with already-assigned brightness values were back-projected to the imaginary plane for synthesis of a stereo-mate. The imaginary exposure station and image plane were determined to have only a horizontal shift from the original image's exposure station and plane. As a result, the stereo-mate synthesized in this paper fulfilled epipolar geometry and yielded easily-perceivable 3D viewing effect together with the original image. The 3D viewing effect was tested with anaglyph at the end.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.182-182
• /
• 2003

Generally, DEM (Digital Elevation Model) is generated by stereo-images acquired same conditions, sensor type, viewing angle, capturing elevation and etc. It is difficult to generate DEM with stereo images acquired different satellite. This study intends that it is DEM generation using pair-images with other sensor systems.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.943-946
• /
• 1998

In this paper, we applied FFT to PCB Images, cutting unnecessary singals and noise, moving the starting point to center of image and used rotaion transform. from the detected edge Hough Transform identify the length, but not the angle, so we matched PCB images with using rotation transform to identify length and angle. After rotation transform we employ Least Squared Method to exact stereo matching.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.45-53
• /
• 2006

This paper proposes a method for an effective intelligent route decision for automatic moving robots(AMR) using a 2D spatial map of a stereo camera system. In this method, information about depth and disparity map are detected in the inputting images of a parallel stereo camera. The distance between the automatic moving robot and the obstacle is detected, and a 2D spatial map is obtained from the location coordinates. Then the relative distances between the obstacle and other objects are deduced. The robot move automatically by effective and intelligent route decision using the obtained 2D spatial map. From experiments on robot driving with 240 frames of stereo images, it was found that the error ratio of the calculated distance to the measured distance between objects was very low, 1.52[%] on average.