• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.26-30
• /
• 2015

In this paper, a simple equivalent circuit model for a defected ground structure (DGS) microstrip line with stepped impedance slot-lines in the ground plane is presented. In addition, an analytic expression for the resonance frequency of the proposed structure is derived. In equivalent circuit modeling, the capacitance and the inductance of the resonance circuit are evaluated from the dimensions of the etched pattern in the ground plane. The resonance frequencies calculated from the proposed method are compared with those obtained with an electromagnetic (EM) simulation.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.360-362
• /
• 1999

Formation of the nickel-cadmium alloy in the negative electrode of nickel-cadmium cell subjected to continuous charging at elevated temperatures ($40~45^{\circ}C$) is shown to be one of the causes of the 'stepped' discharge curves. The alloy has been characterized by electrode potential measurement and X-ray diffraction method. The potential lowering during discharge is related to discharge of the alloy. X -ray diffraction suggests that the nickel-cadmium alloy can be formed during charge in negative electrode by interaction of the two metals. Addition of Ni $(OH)_2$ into $Cd{\;}(OH)_2$ active material is found to form the alloy more readily than sintered negative electrode alone.ode alone.

• 한국전자파학회지:전자파기술
• /
• 제2권4호
• /
• pp.10-16
• /
• 1991

A microstrip bandpass filter using stepped impedance resonators and tapped input / output is realized with Teflon substrate, whose center frequency is 3.5 GHz and fractional bandwidth is 20%. In order to realize a wider bandwidth of 30%, the Crystal's design method and the input / output tapping scheme are used. Another microstrip filter designed as mentioned above is realized with Epsilam-10 substrate. This case shows good agreement between the theoretical responses and the measured ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.142-144
• /
• 1986

The research was conducted for the purpose of examining the dynamic characteristics of train wheel at the running state and preventing the vibrations of the high speed railway. The stress at the boundary surface of web and rim, .sigma./sub c/, was analyzed in consideration of the uniform In-plane compressive stress depending on the conditions of rolling and the rotation of train wheel. Then the equation of transverse vibration of the annular plate with the stepped thickness was analyzed by Rayleigh-Ritz's method.

• 한국항해학회지
• /
• 제22권2호
• /
• pp.33-38
• /
• 1998

Approximate design formulse for bandpass filter using stepped microstrip lines are derived. The coupling length of which can be adjusted according to the factor K.Some advantages fo this filter, thus, are the abilities to control the size and shape by changing the structure of the resonator. Using the design formulas an experimental filter was designed and fabricated . The experimental results have been agree with the designed ones, and hence, the validity of the proposed method has been confirmed.

• 한국전자파학회논문지
• /
• 제22권2호
• /
• pp.245-251
• /
• 2011

본 논문에서는 의사 인터디지털 계단형 임피던스 공진기(Pseudo-Interdigital Stepped Impedance Resonator: PI-SIR)와 개방 루프 링 공진기(Open-Loop Ring Resonator: OLRR)를 이용한 마이크로스트립 이중 대역 대역 통과 여파기를 제안한다. PI-SIR을 이용하여 이중 대역 여파기의 첫 번째 통과 대역과 두 번째 통과 대역을 설계하고, OLRR을 이용하여 두 번째 통과 대역 특성을 강화한다. PI-SIR 구조에서 특성 임피던스 비와 전기적 길이 비를 이용하면 첫 번째 통과 대역과 두 번째 통과 대역을 쉽고 정확하게 조정할 수 있다. 2.45 GHz와 5.8 GHz에서 동작하는 이중 대역 여파기의 설계 결과와 측정 결과로부터 제안된 여파기가 유용하다는 것을 알 수 있다.

• Advances in nano research
• /
• 제15권3호
• /
• pp.215-224
• /
• 2023

Nonlinearity plays an important role in control systems and the application of design. For this reason, in addition to linear vibrations, nonlinear vibrations of the stepped nanobeam are also discussed in this manuscript. This study investigated the vibrations of stepped nanobeams according to Eringen's nonlocal elasticity theory. Eringen's nonlocal elasticity theory was used to capture the nanoscale effect. The nanoscale stepped Euler Bernoulli beam is considered. The equations of motion representing the motion of the beam are found by Hamilton's principle. The equations were subjected to nondimensionalization to make them independent of the dimensions and physical structure of the material. The equations of motion were found using the multi-time scale method, which is one of the approximate solution methods, perturbation methods. The first section of the series obtained from the perturbation solution represents a linear problem. The linear problem's natural frequencies are found for the simple-simple boundary condition. The second-order part of the perturbation solution is the nonlinear terms and is used as corrections to the linear problem. The system's amplitude and phase modulation equations are found in the results part of the problem. Nonlinear frequency-amplitude, and external frequency-amplitude relationships are discussed. The location of the step, the radius ratios of the steps, and the changes of the small-scale parameter of the theory were investigated and their effects on nonlinear vibrations under simple-simple boundary conditions were observed by making comparisons. The results are presented via tables and graphs. The current beam model can assist in designing and fabricating integrated such as nano-sensors and nano-actuators.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.578-597
• /
• 2014

Understanding of 'spatial' pressure distribution is required to determine design loads on local structures, such as plating and framing. However, obtaining a practical 'spatial' pressure distribution is a hard task due to the sensitivity of the data acquisition frequency and resolution. High-resolution Pessure-Idicating Flm (PIF) was applied to obtain pressure distribution and pressure magnitude using stepped crushing method. Different types of PIF were stacked at each test to creating a pressure distribution plot at specific time steps. Two different concepts of plotting 'spatial' pressure-area curve was introduced and evaluated. Diverse unit pixel size was chosen to investigate the effect of the resolution in data analysis. Activated area was not significantly affected by unit pixel size; however, total force was highly sensitive.

• 한국지반신소재학회논문집
• /
• 제4권1호
• /
• pp.3-6
• /
• 2005

사면 또는 옹벽 등 토목구조물에 보강용으로 적용되는 지오그리드의 고장은 토목구조물의 형태변형을 유발할 수 있는 과도한 크리프 변형으로 정의할 수 있다. 본 연구에서는 지오그리드의 크리프 변형을 단시간에 시험할 수 있는 SIM(Stepped Isothermal Methods)과 통계적 수명평가기법을 적용하여, Polyester 편포형 지오그리드의 수명을 예측하였다. 그 결과 예측한 75, 100, 114년에서의 크리프 변형율은 각각, 8.74, 8.79, 8.80%이고, CV%는 2.16~2.20%로 매우 반복성 있는 결과를 보여준다. 수명 예측 결과는 $27^{\circ}C$에서 100년 사용 후 지오그리드의 크리프 변형율이 9.3%로 추정되었고, 현장에서 요구되는 수명(100년 사용 후 크리프 변형율 10% 미만)을 만족하는 것을 확인할 수 있었다. 이 연구를 통하여, SIM을 적용할 경우 기존의 시간-온도 중첩원리(Conventional Time-Temperature Superposition)를 적용한 수명평가 방법에 비하여 시료간의 편차를 최소화 시킬 수 있고 또한 99.5%의 시험시간을 단축시킬 수 있어서 매우 효과적인 것으로 판단된다.

• Wind and Structures
• /
• 제28권1호
• /
• pp.31-47
• /
• 2019

The accurate prediction of snow distributions under the wind action on roofs plays an important role in designing structures in civil engineering in regions with heavy snowfall. Affected by some factors such as building shapes, sizes and layouts, the snow drifting on roofs shows more three-dimensional characteristics. Thus, the research on three-dimensional snow distribution is needed. Firstly, four groups of stepped flat roofs are designed, of which the width-height ratio is 3, 4, 5 and 6. Silica sand with average radius of 0.1 mm is used to model the snow particles and then the wind tunnel test of snow drifting on stepped flat roofs is carried out. 3D scanning is used to obtain the snow distribution after the test is finished and the mean mass transport rate is calculated. Next, the wind velocity and duration is determined for numerical simulations based on similarity criteria. The adaptive-mesh method based on radial basis function (RBF) interpolation is used to simulate the dynamic change of snow phase boundary on lower roofs and then a time-marching analysis of steady snow drifting is conducted. The overall trend of numerical results are generally consistent with the wind tunnel tests and field measurements, which validate the accuracy of the numerical simulation. The combination between the wind tunnel test and CFD simulation for three-dimensional typical roofs can provide certain reference to the prediction of the distribution of snow loads on typical roofs.