• 유통과학연구
• /
• 제16권4호
• /
• pp.67-74
• /
• 2018

Purpose - Most of the amendments to the law on the improvement of the distribution structure of mobile communication terminal equipment, the fully self-sufficient system of terminals, and the separated disclosure system on the terminals are aimed at securing transparency of the distribution structure by eliminating or reducing handset subsidies. This study investigates what items are important for the purchase of mobile phones in various and rapidly changing mobile phone markets from the consumer's point of view and tries to make a strategic suggestion for future mobile distribution strategies. Research design, data, and methodology - The procedure of this study takes place in four steps. In step 1, only the SF type respondents selected for this study were extracted through MBTI analysis. In step 2, they were divided into three hierarchies for the AHP analysis and each element was arranged. In step 3, the AHP analysis was converted to a Fuzzy-AHP number using the trigonometric centroid method. This was to eliminate the ambiguity of the response by converting into a fuzzy number even if data consistency was maintained with CI value below 0.1. In step 4, the number of converted 2-layer and 3-layer was combined to derive the priority when the final handset is selected. Results - First, the highest importance among the four items in the second tier was the terminal function item, followed by brand, price, and design item. Second, in the third tier, the highest importance was level of after-sales service, followed by device price, processing speed, ease of use, usefulness, and rate system. Third, the arithmetic average of the determinant of the fuzzy function showed that processing speed, ease of use and usefulness in the function item, level of after-sales service in the brand item, and device price in the price item were the five most important factors among 16 choice factors. Conclusions - First, there will be a change in the consumption patterns of consumers who have compared distributors and dealers to purchase handsets with more subsidies. Second, it is highly likely that people will purchase new handsets only when they need to change their devices because they can not receive subsidies by switching phone brands any more.

• 지질공학
• /
• 제18권1호
• /
• pp.17-26
• /
• 2008

본 연구에서는 활동억지시스템으로 보강된 사면에 대한 설계법을 체계화하고, 이에 대한 설계 흐름도를 작성하여 합리적인 사면의 설계가 가능하도록 하였다. 제안된 사면의 설계법은 현장상황조사단계, 사면설계단계, 산사태발생 예측단계, 사면파괴규모 판단단계 및 보강공법 선정단계와 같이 5단계로 구성하였다. 사면파괴규모는 기존에 제안된 사면파괴의 위험성을 평가하는 국외의 각종 기준을 정리하고, 이를 국내에서 발생된 산사태 파괴규모와 함께 분석함으로서 정량적인 기준을 마련하였다. 사면활동체적은 파괴규모가 소규모인 경우 $150m^3$이하이고, 중규모인 경우 $150m^3{\sim}900m^3$이며, 대규모인 경우 $900m^3$상으로 분류하였다. 제안된 사면파괴규모를 토대로 각각의 파괴규모에 따라 활동억지시스템을 결정할 수 있도록 하였다. 한편, 활동억지시스템인 억지말뚝, 쏘일네일링 및 앵커에 대한 각각의 설계법을 제안하여 최적의 사면안정공법을 마련할 수 있도록 하였다.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1315-1324
• /
• 2022

The need for remanufacturing ships and various mechanical components continues to increase along with environmental problems. Research on remanufacturing is being carried out in various fields, but research on cleaning is quite insufficient. In particular, there is no research on the cleaning-ability of diverse mechanical components. In order to increase the life cycle of mechanical components, remanufacturing must be considered from the step of design. Particularly, it is also very important to evaluate the degree of easiness in cleaning to remove various pollutants generated by long-term use quickly as well as easily. In this study, the degree of easiness in cleaning is defined as cleaning-ability. In fact, remanufacturing components can be easily done only when cleaning-ability is set high from the step of design. The purpose of this study is to evaluate the cleaning-ability of ships and various mechanical components. The details of easiness in cleaning are cleaning and drying identification, accessibility to cleaning tools, convenience in cleaning, and convenience in drying. This study presents a quantitative procedure to evaluate cleaning-ability, derived various factors influencing each of the details of easiness and their ranges, and gave scores to the factors according to their ranges. The weight was also calculated for the details of easiness in cleaning and the factors. Lastly, this researcher suggests a scoring procedure to evaluate cleaning-ability quantitatively and the total weight of cleaning-ability.

• 한국소음진동공학회논문집
• /
• 제16권12호
• /
• pp.1192-1200
• /
• 2006

Viscoelastic damping materials are widely used to reduce noise and vibration because of its low cost and easy implementation, for examples, on the body structure of passenger cars, air planes, electric appliances and ships. To design the damped structures, the material property such as elastic modulus and loss factor is essential information. The four-parameter fractional derivative model well describes the dynamic characteristics of the viscoelastic damping materials with respect to both frequency and temperature. However, the identification procedure of the four-parameter is very time-consuming one. In this study a new identification procedure of the four-parameters is proposed by using an FE model and a gradient-based numerical search algorithm. The identification procedure goes two sequential steps to make measured frequency response functions(FRF) coincident with simulated FRFs: the first one is a peak alignment step and the second one is an amplitude adjustment step. A numerical example shows that the proposed method is useful in identifying the viscoelastic material parameters of fractional derivative model.

• 한국정밀공학회지
• /
• 제31권1호
• /
• pp.59-66
• /
• 2014

The central seam, the vertical 'line' between doors, in the front view of a refrigerator must have its gap and flush within certain ranges to meet functional and aesthetic requirements. The conventional criteria for gap and flush control in the industry are to keep the gap and flush within certain ranges at each of various points along the seam. For aesthetics, however, the uniformity of the gap is also as important because a 'tapered' seam is negatively perceived by human eyes. This paper shows a case study of tolerance design for a refrigerator door system. It presents a step-by-step procedure, which consists of datum flow chain analysis, identification of assembly features, computer modeling of feature tolerances, assembly operations and measurements, tolerance simulation, and tolerance adjustments based on the simulation results. It is found that extra care may need to be used to satisfy the aesthetical criterion for gap uniformity.

• 한국전산구조공학회논문집
• /
• 제12권3호
• /
• pp.397-406
• /
• 1999

본 연구는 부구조화에 기초한 다단계 혼성 구조 재해석방법을 제시한다. 부구조화의 틀에 보존근사화의 각 항을 차원축소법의 기저로 한 보존 전역-부분근사화에 의하여 변위 산정의 정확성과 효율성을 확보하고, 이를 바탕으로 이미 구성된 응력-변위 관계식을 병용하는 혼성방식을 통하여 전체 설계의 중간 단계에서 반복되는 재해석 과정의 신뢰성을 높인다. 전체적으로 선형근사화와 상반근사화를 교차적용하는 1단계 보존근사화로부터 전역 근사화와 결합하여 구하는 변위산정과 그에 종속되는 행렬연산으로 산출하는 응력계산의 3단계로 이루어지는 본 방법은 대형 구조계를 대상으로 하여, 해석의 기본 틀로 부구조화 방법을 택하였으며, 몇 개의 예제들을 통하여 타당성 및 유용성을 검증하였다.

• 전자공학회논문지S
• /
• 제35S권9호
• /
• pp.86-94
• /
• 1998

본 논문에서는 기존 고속 블럭 알고리즘보다 성능이 우수하고 하드웨어 구현에 적합한 새로운 MFSS(Modified Four-Step Search) 알고리즘을 제안한다. 제안하는 알고리즘의 추정 과정은 일정한 규칙을 갖기 때문에 하드웨어 구현에 적합하고, 모의실험을 통해 거의 FS(Full Search) 성능에 근접할 정도로 기존의 고속 움직임 추정 알고리즘보다 성능의 우수함을 확인하였다. 본 논문에서는 이러한 MFSS(Modified Four-Step Search) 움직임 추정 및 보상기 설계에서 중요한 고려 사항은 설계 결과의 하드웨어적인 크기와 출력이 나오기 까지의 필요한 지연 시간인데, 본 논문에서는 9개의 PE(Process Element)만을 이용하여 구현함으로써 전체 로직의 양을 최적화 하였고, 움직임 추정기와 보상기를 결합함으로써 메모리를 공유하고 필요한 지연시간도 줄이는 구조를 제안한다.

• 조명전기설비학회논문지
• /
• 제12권3호
• /
• pp.29-36
• /
• 1998

본 연구에서는 제어시스템과 규범모델 사이의 스텝응답의 오차적분올 최소화하여 모델추종법에 기초한 디지탈 PID제어기의 설계법을 제안한 것이며, 전류형인버터 구동유도전동기의 속도제어에 적용했고, 시스템의 동특성을 스댐웅답으로 나타냈다. PlD제어기의 최적파라메터는 행렬연산으로 쉽게 구할 수 있으며, 계산도 간단하며 계통 적인 설계과정을 통하여 일률적으로 처리된다. 끝으로, 스댐상의 목표치 변화 및 외란에 대해서도 안정하고 정상편차가 없는 운전결과를 컴퓨터 시뮬레이션으로 나타냈고 실험적으로 그 결과를 확인하였다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.121-124
• /
• 1996

In general, cellular manufacturing system can be constructed by the following two steps. The first step forms machine cells and part families, and the second step determines cell layout based on the result of first step. Cell layout has to be considered when cell is formed becauese the result of cell formation affects it. This paper presents a cell formation algorithm and proposes an integrated mathematical model for cell formation and cell layout. The cell formation algorithm minimizes the number of exceptional element in cellular manufacturing system. New concept for similarity and incapability is introduced, based on machine-operation incidence matrix and part-operation incidence matrix. One is similarity between the machines, the other is similarity between preliminary machine cells and machines. The incapability identifies relations between machine cells and parts. In this procedure, only parts without an exceptional element are assigned to machine cell. Bottleneck parts are considered with cell layout design in an integrated mathematical model. The integrated mathematical model determines cell layout and assigns bottleneck parts to minimize the number of exceptional element and intercell moving distance, based on linearixed 0-1 integer programming. The proposed algorithm is illustrated by using numerical examples.

• Archives of Plastic Surgery
• /
• 제50권2호
• /
• pp.142-147
• /
• 2023

Some of Asian eyelids have double fold and some do not. Many people tend to prefer double eyelid in aesthetic and functional reasons. Since the mechanism of double eyelid is bonding the eyelid skin to the eye-opening tissue, the principle of double eyelid surgery is also connecting the eyelid skin to levator component. Double eyelids are differentiated by their shape according to the height and curvature. The double eyelid surgery procedure is divided into incision method and nonincision method. And the incision method is subdivided into double fold line design, skin and oculi muscle incision or excision, pretarsal or preaponeurotic soft tissue excision, fixation of posterior lamella to anterior lamella, and skin suture. The nonincision method is to connect the posterior lamella and the anterior lamella as a thread only without an incision. A successful double eyelid surgery creates a fold well-balanced in height, curvature, and depth of the fold based on patient's preference. In this article, the author's own methods of performing surgery are described, with a step-by-step guide and surgical tips.