• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.366-373
• /
• 2020

This study explored the factors associated with dependence among smartphone-dependent adults in their 20s. The data was derived from the 2017 survey on smartphone over-dependence conducted by the Ministry of Science and ICT and the National Information Society Agency. The participants were 879 adults in their 20s. The data was analyzed by frequencies, percentages, means, standard deviations, independent t-tests, Pearson's correlation coefficients, and multiple regression analysis. The results revealed instant messengers as the most used application by participants. Participants in the high risk category of dependence also used SNS (Social Networking Services), music, and games more than those in the potential risk category. The more serious the dependence, the greater the frequency of smartphone use (β=.16, p=.000), and use of games (β=.10, p=.028), webtoons (β=.14, p=.004), SNS (β=.09, p=.047), and financial transactions (β=.17, p=.000). They did not recognize their smartphone dependence when it was relatively low. However, when this became serious, they then realized that they depended on the smartphone more than others. That means that it is not easy for adults to recognize their smartphone dependence on their own. However, recognition of the problem is the first step for adults to solve their problems. A program that evaluates their problematic smartphone use should be installed and used on all smartphones.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.67-75
• /
• 2005

For th aim of lightweight microwave absorbers, conductive and magnetic microspheres are fabricated by plating of Co films on hollow ceramic microspheres of low density. Metal plating was carried out in a two-step electroless plating process (pre-treatment of activation and plating). Uniform coating of the film with about $2{\~}3{\cal}um$ thickness was identified by SEM. High-frequency magnetic and microwave absorbing properties were determined in the rubber composites containing the Co-coated microspheres. Due to conductive and ferromagnetic behavior of the Co thin films, high dielectric constant and magnetic loss can be obtained in the microwave frequencies. Due to those electromagnetic properties, high absorption rate (25 dB) and thin matching thickness ($2.0{\~}2.5{\cal}mm$) are predicted in the composite layers containing the metal-coated microspheres of low density (about 0.84 g/cc) for the electromagnetic radiation in microwave frequencies.

• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.457-466
• /
• 1997

We developed a new hearing aid telephone which helps the hearing impaired person to improve the listening ability of telephone speech. Recently, the hearing impaired person and the elderly who has hearing loss have been continuously increased and their desire for participating society as a producer has been increased also. So they strong1y want the hearing aid devices which make compensation fortheir handicap. The hearing aid telephone is one of the basic aid devices that helps the hearing impaired to communicate well with other poeple and to acquire easily useful information through the phone. We analyze the hearing ability of the hearing impaired, design the new model of the hearing aid telephone and test the telephone in three fields-electrical, word perception, user test. Our new tolephone has lour band pass filter channels and the center frequencies of these filters are 500, 1000, 2000, 3000Hz which are considered psychoacoustic factors and telephone line characteristics. The hearing impaired can adjust the total gain characteristics of receiving sound to his hearing ability by setting four volumes in the telelphone. This procedure is called fitting which is a very important factor for the hearing impaired to take meaning of speech. The total gain of this telephone is over 20dB from 250Hz to 3200Hz range. From the results of the tests we certify that our new model is better for the hearing impaired to understand the meaning or telephone speech than the old general models. The next step of developing the hearing aid telephone is to study about compressing sidetone and noise, dividing frequency bands, selecting hearing aid pattern and compensating psychoacoustic loudness. we expect that the advanced hearing aid telephone can be developed by the research about speech perception characteristics of the hearing impaired in engineering and clinical side.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.5
• /
• pp.11-20
• /
• 2002

Based on regularization principles, we propose a new dequantization scheme on DCT-based transform coding for reducing of blocking artifacts and minimizing the quantization error. The conventional image dequantization is simply to multiply the received quantized DCT coefficients by the quantization matrix. Therefore, for each DCT coefficients, we premise that the quantization noise is as large as half quantizer step size (in DCT domain). Our approach is based on basic constraint that quantization error is bounded to ${\pm}$(quantizer spacing/2) and at least there are not high frequency components corresponding to discontinuities across block boundaries of the images. Through regularization, our proposed dequantization scheme, sharply reduces blocking artifacts in decoded images. Our proposed algorithm guarantees that the dequantization process will map the quantized DCT coefficients will be evaluated against the standard JPEG, MPEG-1 and H.263 (with Annex J deblocking filter) decoding process. The experimental results will show visual improvements as well as numerical improvements in terms of the peak-signal-to-noise ratio (PSNR) and the blockiness measure (BM) to be defined.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.67-74
• /
• 2008

This paper proposes two peak-windowing algorithms for peak-to-average power reduction(PAPR) of orthogonal frequency division multiple access(OFDMA) downlink systems. The Proposed algorithms mitigate the effect of excessive suppression due to successive peaks or relatively high peaks of the signal. First, multi-stage peak windowing algorithm is proposed, which exploits multiple threshold of target PAPR in order to step down the peaks gradually. Secondary, variable-length peak windowing algorithm is proposed, which adapts the window length with respect to the existence of successive peaks within a half of window length. Therefore, the proposed method reduces the distortion of signal amplitude caused by window overlapping. The proposed algorithms outperform the conventional peak windowing with the aid of window-length adaptation or sequential peak power reduction. Simulation results show the efficiency of the proposed algorithms over OFDMA downlink systems, especially WiBro systems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.117-125
• /
• 2007

Recently, a fuel cell with low voltage and high current output characteristics is remarkable for new generation system. It needs both a DC-DC step-up converter and DC-AC inverter to be used in fuel cell generation system. Therefor, this paper, consists of an isolated DC-DC converter to boost the fuel cell voltage 380[VDC] and a PWM inverter with LC filter to convent the DC voltage to single-phase 220[VAC]. Expressly, The fuel cell system which it proposes DC-DC the efficient converter used PWM the phase transient control law and it depended to portion resonance ZVS switching, loss peek voltage and electric current of realization under make schedule, switching frequency anger and the switch reduction. And mind benevolence it sprouted 2 in stop circuit and it added and a direct current voltage and the electric current where the ingredient is reduced in load side ripple stable under make whom it will be able to supply. Besides the efficiency of 92[%]is obtained over the wide output voltage regulation ranges and load variations. Also, under make over together the result leads simulation and test, the propriety confirmation.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.86-94
• /
• 2014

To develop a Root Cause Analysis Map which determines the cause of the accident in chemical laboratory, The Root Cause Analysis(RCA) Map for the laboratory areas was sketched from Phase 1 of the accident element to Phase 3 of the accident element, based on the RCA Map which is applied in the petrochemical industry. On the basis of laboratory RCA Map which was classified by using such method. The root causes of the 211 accident cases in laboratories were classified from Phase 4 to Phase 5 by the Cause Factor Charting technique and The cause of the accident data were inputted to EXCEL program. After that, The causes of the accident data were sorted and classified by type and each step. So 'Approximate Primary RCA Map Draft' was written. In addition, it was reaffirmed whether the root causes of 211 accidents of laboratory were appropriate to 'Primary RCA Map Draft'. By complementing the cause which was expected to cause future accidents, the RCA Map for chemical laboratories was developed. Based on 'RCA Map' proposed in this study, the causes of accidents were analysed management systems 35%, monitoring 12.2%, Human Factor Eng. 15.1% and education training 12.1% by the size of the frequency from Phase 1 to Phase 5.

• Journal of Convergence for Information Technology
• /
• v.10 no.1
• /
• pp.128-138
• /
• 2020

The purpose of this study is to verify the medial effect of social support in the process of the effect of working mother compatibility on spouse satisfaction. To that end, 727 employed workers who were kept samples until the 10th year (2017) were analyzed out of the data from the Korea Children's Panel Survey. Data analysis was performed for frequency analysis and regularity verification, and correlation and hierarchical regression were performed. In addition, the three-step method of Baron & Kenny (1986) was used to verify the mediated effect of social support. The results of the verification are as follows. First, the advantages of working mothers' work-in-home compatibility have had a static impact on their spouse satisfaction(ß=.164, t=4.078, p<.01). Second, the conflict between working mothers and their families has shown an amulet (-) impact on their spouse satisfaction(ß=-.134, t=-3.438, p<.05). Third, the partial selling effect of social support was verified in the process of the effect of the factors of conflict and advantages of working mothers on their spouse satisfaction. Based on the above research results, the compatibility of working mothers with working families suggested development and application of programs to enhance spouse satisfaction and social support.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.149-158
• /
• 2005

This paper proposed a blind watermarking method for video contents which satisfies both the invisibility and the robustness to attacks to prohibit counterfeiting, modification, illegal usage and illegal re-production of video contents. This watermarking algorithm targets MPEG compression system and was designed to control the amount of watermarking to be inserted according to the adaptive quantization scale code to follow the adaptive quantization of the compression system. The inserting positions of the watermark were chosen by considering the frequency property of an image and horizontal, vertical and diagonal property of a $8{\times}8$ image block. Also the amount of watermarking for each watermark bit was decided by considering the quantization step. This algorithm was implemented by C++ and experimented for invisibility and robustness with MPEG-2 system. The experiment results showed that the method satisfied enough the invisibility of the inserted watermark and robustness against attacks. For the general attacks, the error rate of the extracted watermark was less than $10\%$, which is enough in robustness against the attacks. Therefore, this algorithm is expected to be used effectively as a part in many MPEG systems for real-time watermarking, especially in the sensitive applications to the network environments.

• Journal of Acupuncture Research
• /
• v.27 no.5
• /
• pp.125-134
• /
• 2010

Objectives : There has been a need for developing and establishing operational curriculum for the education of acupuncture, but defining the level and step of the acupuncture education in clinical perspectives was not thoroughly recognized so far. Methods : We analysed the usage of acupuncture points in the official textbook to recognize the most frequently used acupoints in clinical medicine. It was found that $ST_{36}$ $LI_4$ $SP_6$ $HT_7$ $LR_3$ $CV_{12}$ $BL_{23}$ $CV_6$ $BL_{20}$ $CV_4$ $LI_{11}$ $PC_6$ $KI_3$ $GB_{20}$ $GV_{20}$ $GB_{34}$ $BL_{18}$ $GV_{14}$ $BL_{17}$ $BL_{40}$ are the most frequently used 20 acupuncture points and GB(足少陽擔經), CV(任脈), ST(足陽明胃經) are the most frequently used meridians. Results : The $ST_{36}$, $GB_{34}$, $LI_{11}$ and GB(足太陽膀胱經) meridian are most frequently used for muskuloskeletal disease, $ST_{36}$, $LI_4$, $LI_{11}$ and GB(足太陽膀胱經) meridian are most frequently used for neuromuskular disease, and $ST_{36}$, $CV_{12}$, $BL_{20}$ and CV(任脈) meridian are most frequently used for the digestive system disorders. Conclusions : This study was the first systematic approach to get essential acupuncture points for the education of clinical perspectives of TKM especially for the acupuncture and moxibustion. We found that the $ST_{36}$, $GB_{34}$, $LI_{11}$ and GB(足太陽膀胱經) are the most frequently used acupuncture point and meridian. This study will be used for the development of TKM clinical curriculum.