• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.430-439
• /
• 2020

Purpose: As the frequency of impact typhoons increases and the form of damage becomes more complicated, the need for information to help disaster response workers recognize the typhoon situation in advance is growing. In this study, Definitions and implementation measures for information utilized at each stage of the task were proposed in carrying out typhoon response tasks that occur every year. Method: In 2019, the government classified information that was used for each step of work and conducted analysis on necessary information for the situation. Based on the analyzed information, typhoon status information was established through an opinion survey by central and local government officer. Result: The task of typhoon situations was the most important part of monitoring weather conditions and sharing damage situations, and the information utilized was analyzed to require information derived through the convergence of historical and situation information. Conclusion: As the correlation between work and information between the response departments increases as the typhoon situation progresses, information about typhoon situation should be applied to the actual typhoon situation in the future to enhance information and establish a related system.

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.995-1006
• /
• 2016

According to 5th IPCC Climate Change Report, there is a very high likelihood that the frequency and intensity of extreme rainfall events will increase. In reality, flood damage has increased, and it is necessary to estimate the future probabilistic design rainfall amount that climate change is reflected. In this study, the future probabilistic design precipitation amount is estimated by analyzing trends of future annual maximum daily rainfall derived by RCP 8.5 scenarios and using the scale-invariance technique. In the first step, after reviewing the time-scale characteristics of annual maximum rainfall amounts for each duration observed from 60 sites operating in Korea Meterological Administration, the feasibility of the scale-invariance technique are examined using annual daily maximum rainfall time series simulated under the present climate condition. Then future probabilistic design rainfall amounts for several durations reflecting the effects of climate change are estimated by applying future annual maximum daily rainfall time series in the IDF curve equation derived by scale-invariance properties. It is shown that the increasing trend on the probabilistic design rainfall amount has resulted on most sites, but the decreasing trend in some regions has been projected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3726-3732
• /
• 2010

The purpose of this study was to investigate the effects of health exercise program to old Women's walking ability, depression and WHOQOL-BREF. Data were collected from April to June, 2007 from the falls experienced 70 women elderly. All subjects participated in 12 week health exercise program which was designed in order to develop walking ability. The data were analyzed using frequency, %, paired t-test. The results of this study were as followings; First, there was significant differences in the average time of chair stand (t=2.291, p=.025), one leg standing(Rt. leg)(t=2.236, p=.029), step length between before and after(t=4.015, p=.000) training of 12 week health exercise program. Second, there was non significant differences in depression(t=1.044, p=.300) but, significant differences in WHOQOL-BREF(t=3.528, p=.001). The WHOQOL-BREF in general quality of life(t=2.923, p=.005), physical(t=3.039, p=.003), psychological(t=2.481, p=.016), social(t=2.531, p=.014) and environment domain(t=4.259, p=.000) were significant differences. The results suggest that the 12 week health exercise program can improve the muscle endurance and balance, QOL.

• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.449-460
• /
• 2020

Super-resolution is a technique used to reconstruct an image with low-resolution into that of high-resolution. Recently, deep-learning based super resolution has become the mainstream, and applications of these methods are widely used in the remote sensing field. In this paper, we propose a super-resolution method based on the deep back-projection network model to improve the satellite image resolution by the factor of four. In the process, we customized the loss function with the edge loss to result in a more detailed feature of the boundary of each object and to improve the stability of the model training using generative adversarial network based on Wasserstein distance loss. Also, we have applied the detail preserving image down-scaling method to enhance the naturalness of the training output. Finally, by including the modified-residual learning with a panchromatic feature in the final step of the training process. Our proposed method is able to reconstruct fine features and high frequency information. Comparing the results of our method with that of the others, we propose that the super-resolution method improves the sharpness and the clarity of WorldView-3 and KOMPSAT-2 images.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.4
• /
• pp.250-259
• /
• 2006

This study looks into forest fire occurrence hazards according to the change of temperature and humidity over thirty years at interval of ten days. We used data from the forest fire inventory from 1995 to 2004 and weather data such as average temperature and relative humidity for 30 years from 1971 to 2000. These data were expressed as a database with ten-day intervals for 76 weather stations. Forest fire hazards occurred in the spring season from the end of March to the middle of April. For the first step, the primitive surface of temperature and humidity was interpolated by IDW (the standard interpolation method). These thematic maps have a 1 km by 1 km grid spacing resolution. Next, we executed a simple regression analysis after extracting forest fire frequency, temperature and humidity values from 76 weather stations. The results produced a coefficient of determination ($R^2$) ranging from 0.4 to 0.6. Moreover, the estimation of forest fire occurrence hazards during early April was very high at Gyeongbuk Interior, Chungcheong Interior and part of Gangwon. The range of temperature and humidity having an influence on forest fire occurrence was as follows: average temperature and relative humidity in early April was $9-12^{\circ}C$ and 61-65%. At the end of March, temperature was $6-10^{\circ}C$, humidity 62-67%, and temperature was $11-14^{\circ}C$ and humidity 60-67% in the middle of April.

• Journal of KIISE:Software and Applications
• /
• v.35 no.9
• /
• pp.562-571
• /
• 2008

For the purpose of building domain ontology, this paper proposes a methodology for building core ontology first, and then enriching the core ontology with the concepts and relations in the domain thesaurus. First, the top-level concept taxonomy of the core ontology is built using domain dictionary and general domain thesaurus. Then, the concepts of the domain thesaurus are classified into top-level concepts in the core ontology, and relations between broader terms (BT) - narrower terms (NT) and related terms (RT) are classified into semantic relations defined for the core ontology. To classify concepts, a two-step approach is adopted, in which a frequency-based approach is complemented with a similarity-based approach. To classify relations, two techniques are applied: (i) for the case of insufficient training data, a rule-based module is for identifying isa relation out of non-isa ones; a pattern-based approach is for classifying non-taxonomic semantic relations from non-isa. (ii) For the case of sufficient training data, a maximum-entropy model is adopted in the feature-based classification, where k-NN approach is for noisy filtering of training data. A series of experiments show that performances of the proposed systems are quite promising and comparable to judgments by human experts.

• Journal of Biosystems Engineering
• /
• v.33 no.5
• /
• pp.362-369
• /
• 2008

There is developing interest in precision agriculture in Korea, despite the fact that typical Korean fields are less than 1 ha in size. Describing within-field variability in typical Korean production settings is a fundamental first step toward determining the size of management zones and the inter-relationships between limiting factors, for establishment of site-specific management strategies. Measurements of rice (Oriza Sativa L) yield, chlorophyll content, and soil properties were obtained in a small (100-m by 30-m) Korean rice paddy field. Yield data were manually collected on 10-m by 5-m grids (180 samples with 3 samples in each of 60 grid cells) and chlorophyll content was measured using a Minolta SPAD 502 in 2-m by 2-m grids. Soil samples were collected at 275 points to compare results from sampling at different scales. Ten soil properties important for rice production in Korea were determined through laboratory analyses. Variogram analysis and point kriging with and without median polishing were conducted to determine the variability of the measured parameters. Influence of variogram model selection and other parameters on the interpretation of the data was investigated. For many of the data, maximum values were greater than double the minimum values, indicating considerable spatial variability in the small paddy field, and large-scale spatial trends were present. When variograms were fit to the original data, the limits of spatial dependency for rice yield and SP AD reading were 11.5 m and 6.5 m, respectively, and after detrending the limits were reduced to 7.4 m and 3.9 m. The range of spatial dependency for soil properties was variable, with several having ranges as short as 2 m and others having ranges greater than 30 m. Kriged maps of the variables clearly showed the presence of both large-scale (trend) variability and small-scale variability in this small field where it would be reasonable to expect uniformity. These findings indicate the potential for applying the principles and technology of precision agriculture for Korean paddy fields. Additional research is needed to confirm the results with data from other fields and crops.d similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.611-617
• /
• 2018

The application of health monitoring, including a fault detection technique, is needed to secure the structural safety of large structures. A 2-step crack identification method for detecting the crack location and size of the beam structure is presented. First, a crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape obtained from the distributed local strain data. The crack location and size were then identified based on the natural frequencies obtained from the acceleration data and the neural network technique for the pre-estimated crack occurrence region. The natural frequencies of a cracked beam were calculated based on an equivalent bending stiffness induced by the energy method, and used to generate the training patterns of the neural network. An experimental study was carried out on an aluminum cantilever beam to verify the present method for crack identification. Cracks were produced on the beam, and free vibration tests were performed. A crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape, and the crack location and size were assessed using the natural frequencies and neural network technique. The identified crack occurrence region agrees well with the exact one, and the accuracy of the estimation results for the crack location and size could be enhanced considerably for 3 damage cases. The presented method could be applied effectively to the structural health monitoring of large structures.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.621-628
• /
• 2012

The FAT-1 protein is an n-3 fatty acid desaturase, which can recognize a range of 18- and 20-carbon n-6 substrates and transform n-6 polyunsaturated fatty acids (PUFAs) into n-3 PUFAs while n-3 PUFAs have beneficial effect on human health. Fat1 gene is the coding sequence from Caenorhabditis elegans which might play an important role on lipometabolism. To reveal the function of fat1 gene in bovine fetal fibroblast cells and gain the best cell nuclear donor for transgenic bovines, the codon of fat1 sequence was optimized based on the codon usage frequency preference of bovine muscle protein, and directionally cloned into the eukaryotic expression vector pEF-GFP. After identifying by restrictive enzyme digests with AatII/XbaI and sequencing, the fusion plasmid pEF-GFP-fat1 was identified successfully. The pEF-GFP-fat1 vector was transfected into bovine fetal fibroblast cells mediated by Lipofectamine2000$^{TM}$. The positive bovine fetal fibroblast cells were selected by G418 and detected by RT-PCR. The results showed that a 1,234 bp transcription was amplified by reverse transcription PCR and the positive transgenic fat1 cell line was successfully established. Then the expression level of fat1 gene in positive cells was detected using quantitative PCR, and the catalysis efficiency was detected by gas chromatography. The results demonstrated that the catalysis efficiency of fat1 was significantly high, which can improve the total PUFAs rich in EPA, DHA and DPA. Construction and expression of pEF-GFP-fat1 vector should be helpful for further understanding the mechanism of regulation of fat1 in vitro. It could also be the first step in the production of fat1 transgenic cattle.

• Journal of the Korean Regional Science Association
• /
• v.34 no.3
• /
• pp.3-11
• /
• 2018

Urban regeneration is a worldwide challenging project, showing a great interest in the sector. In order for Korea's urban regeneration to be settled successfully in the early stage, it is necessary to analyze and review the opinions and business performance of the urban regeneration areas. The purpose of this study is to evaluate the urban regeneration planning factors affecting urban regeneration on the satisfaction of citizens, public administration and region. This study surveyed the residents and experts of the Yeongju city, Gyeongsangbuk-do, where urban regeneration is actively doing with active participation of residents and local government. Based on the data of the survey, this paper performed frequency analysis, correlation analysis and multiple regression analysis as a analytic methods. The results revealed that 'community factor' was the most important factor to the satisfaction of residents in the urban regeneration project in progress. In the final stage(at present), both 'community factor' (0.387) and 'physical factor'(0.454) were found to have a significant effect on satisfaction. While the satisfaction from 'the economic factor'(0.111) has slowed but it has increased with 'the physical factors' in the process of regeneration project, 'the social factors'(-0.007) shows a downward trend. If the role of social factors and community factors are supported at the beginning step of the urban regeneration project, the physical factors and economic factors are continued to lead a sustainable urban regeneration in the long term.