• 산업기술연구
• /
• 제19권
• /
• pp.59-65
• /
• 1999

This study is to analyze turbulent flow over a backward-facing step in a rectangular duct. The side wall effects on the internal flow were determined by varying the aspect ratio(defined as the step span-to-height ratio) from 1 to 20. In the flow behind a backward-facing step, separation, recirculation and redeveloping is occurred frequently. These phenomena appear in a particular variation by varying the aspect ratio. The results show that the aspect ratio has an influence on the velocity and reattachment length. When the AR is increased, the reattachment length is increased. For 6 over aspect ration, the rate of increase is decreased. The length of recirculation in the upper corner is increased, as the increase of aspect ration. It's width is not changed in the variation of aspect ration. The transverse, streamwise and spanwise velocities were decreased along the flow down stream of the step.

• PNF and Movement
• /
• 제1권1호
• /
• pp.33-41
• /
• 2003

Objectives : The purpose of this study was to describe and compare the temporo-spatial gait characteristics of healthy young people with those of healthy elderly people. Methods: The data were collected by 40 volunteers. 20 subjects were between 20 and 31 years of age, and 20 subjects were between 65 and 84 years of age. Temporal and spatial parameters of gait were analysed for using the computerized GAITRite system. Results : The system integrates specific components of locomotion to provide a single, numerical representation of gait, the Functional Ambulation Performance score. Differences in gait characteristics between the two groups were examined using a correlated t-test(p<.05). Significant differences were observed between the groups for step length, step/extremity ratio and velocity. Young people demonstrated a significantly larger velocity, step length and step/extremity ratio than the elderly people. Conclusions: These results indicate that the GAITRite system can be useful in detecting footfall patterns and selected time and distance measurements of young and older persons. Additionaly, differences in walking velocity, step length and step/extremity ratio between old and young people may have influenced the gait characteristics measured.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.6-9
• /
• 2011

Step feed process was analyzed stoichiometrically for the optimal operation conditions in this study. In case of optimal operation conditions, minimum R (sludge recycling) value, r (internal recycling ratio) value, and n (influent allocation ratio) value for the step feed process to acquire the maximum TN removal efficiency were identified by theoretical analysis. Maximum TN removal efficiency, based on stoichiometric reaction, can be obtained by controlling n value for the step feed process.

• 대한통합의학회지
• /
• 제2권3호
• /
• pp.49-55
• /
• 2014

Purpose : The purpose of this study was to investigate the effect of cross bag weight and carrying bag position type on vastus medialis oblique and vastus lateralis muscle activity ratio during step up. Method : Twenty healthy subjects participated in this study. subjects randomized performed step up with bag weight less than 15%, more than 15% of totalbody weight and without bag and carrying bag position ipsilateral and contralateral. muscle activity was measured with surface electromyography. One-way analysis of variance with repeated measures was used with a significance level of 0.05 Result : The results of this study were as follows: 1. The muscle activity ratio decreased significantly ipsilateral bag position more than 15% of body weight(p<.05). Also, the muscle activity ratio increased significantly contra lateral bag position more than 15% of body weight(p<.05). Conclusion : In conclusion, it was found that applied carrying bag position with weight on VMO,VL muscle activity ratio during step up down. Therefore carrying bag position can be used to selective activate vastus medialis oblique muscle in subjects with patellofemoral pain syndrome.

• Restorative Dentistry and Endodontics
• /
• 제31권1호
• /
• pp.50-57
• /
• 2006

이 연구의 목적은 $ProTaper^{(R)}$ system을 사용하였을 때, 각 단계별로 근관 형성 결과를 분석 하는 것이다. 20개의 레진 블락을 근관 성형 방법에 따라, 엔진 구동형 $ProTaper^{(R)}$로 전체 근관을 성형한 군을 R군, 수동형 $ProTaper^{(R)}$로 전체 근관을 성형한 군을 M군으로 하였다. 근관의 술 전, 술 후 이미지를 각 파일 단계별로 스캔한 후, 중심이동률 산출을 위해 원래의 근관 이미지와 각 단계의 파일 사용후의 이미지를 각각 중첩하였고, 근관의 변위량 산출을 위해 각 단계의 파일 사용후의 이미지와 직전 파일 사용후의 이미지를 중첩하였다. 근단공으로부터의 수직거리 1 2, 3, 4그리고 5mm위치에서 중심이동률과 근관의 변위량을 측정하였다. 실험 결과 R군의 모든지점에서 각 단계별 중심이동률과 근관 변위량은 각각 유의한 차이가 없었다 (p<0.05). M군에서 1 mm를 제외한 모든 지점에서 각 단계별 중심 이동률과 근관 변위 량은 각각 유의한 차이가 없었다 (p<0.05). 그러나 M군의 1mm 지점에서 F2 file step은 통계학적으로 큰 중심 이동률과 근관 변위량을 보였다 (p<0.05). 본 연구의 결과에서 엔진 구동형 $ProTaper^{(R)}$ 사용 시에는 각 파일 단계별 근관 변위 정도에 유의한 차이가 없었으나, 수동형 ProTaper로 근관 성형을 하였을 때 , F2 file step에서 특히 근관 변위가 크게 나타났다.

• Communications for Statistical Applications and Methods
• /
• 제12권2호
• /
• pp.473-481
• /
• 2005

The testing problem for sphericity structure of the covariance matrix in a multivariate normal distribution is introduced when there is a sample with 2-step monotone missing data pattern. The maximum likelihood method is described to estimate the parameters on the basis of the sample. Using these estimates, the likelihood ratio criterion for testing sphericity is derived.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.587-590
• /
• 1989

Bilateral Variable-Ratio chopper system performs Step-down chopper and Step-up chopper operations automatically every operating period of the chopper. The Ratio between Step-down chopper and Step-up chopper operations is determined by a Tine- ratio and the circuit elements. In this paper, we suggest that this chopper system can operate variable speed control of the electric motorcar when it is applied to the electric motorcar.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.183-186
• /
• 2004

Unipoled piezoelectric transformers were designed with different input and output area ratios. The voltage step-up ratio increased proportionally with increasing the input area. The piezoelectric transformers operated in each transformer's resonance vibration mode. In this paper, ANSYS(FEM program) was used for analysing piezoelectric transformers. We compared with analysis and experimental results. The voltage step-up ratio showed maximum value in output area of small size. Output characteristics of piezoelectric transformers with various size were simulated. The result of analysis showed 2~7 times higher voltage step-up ratio than a experiment result.

• 한국전기전자재료학회논문지
• /
• 제14권4호
• /
• pp.289-296
• /
• 2001

The piezoelectric transformers of 2.0x10x48 ㎣ size were fabricated with PSN-PMN-PZT(T10 and PNW-PMN-PZT(T2) composition ceramics. Effects of micro structural and piezoelectric properties on the electrical characteristics of the piezoelectric transformers were investigated. Under the fixed output power of 6 W, temperature rise of T1 transformer at the optimum load was smaller than T2 one because of fine grain size effect. Voltage step-up ratio of T1 transformer showed higher value than T2 one T1 transformer showed an excellent properties with voltage step-up ratio of 12.41, efficiency of 95.23% and temperature rise of 7.2$^{\circ}C$ at 200㏀ load resistance. And also, T2 transformer showed an excellent properties with voltage step up ratio of 9.81, efficiency of 95.51% and temperature rise of 9$^{\circ}C$ at 150㏀ load resistance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.813-816
• /
• 2004

Unipoled piezoelectric transformers were designed with different input and output area ratios. The voltage step-up ratio increased proportionally with increasing the input area. The piezoelectric transformers operated in each transformer's resonance vibration mode. In this paper, ANSYS(FEM program) was used for analysing piezoelectric transformers. We compared with analysis and experimental results. The voltage step-up ratio showed maximum value in output area of small size. Output characteristics of piezoelectric transformers with various size were simulated. The result of analysis showed $2\sim7$ times higher voltage step-up ratio than a experiment result.