• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.933-939
• /
• 2012

In general, the three-dimensional(3D) coordinates of the manufactured ship blocks are measured using the laser measuring equipment by ship engineers. But, many deflections between the measured coordinates in manufactured step and the designed coordinates in the design step are occurred because of the measuring process of ship blocks manually. Thus, the ship engineer should conform the consistency between the measured coordinates and the designed coordinates step by step, and it largely causes the loss of manpower and time. In this paper, the automated pattern matching algorithm of 3D coordinates for quality control in ship blocks is suggested in order to solve this problem, and the performance of the algorithm is analyzed using the 3D coordinates simulation software developed by our research laboratory. The coordinates matching rate of the measured coordinates in the single/multi ship block(s) is about 90.2% under the tolerated distance error range is 20~25cm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1810-1814
• /
• 2017

This paper develops an approach to the algorithm of Gait pattern Analysis and step measurement with Multi-Pressure Sensors. The process of gait consists of 8 steps including stance and swing phase. As 3 parts of foot is supporting most of human weight, multiple pressure sensors are attached on the parts of foot: forefoot, big toe, heel. As 3 parts of foot is supporting most of human weight, multiple pressure sensors are attached on the parts of foot: forefoot, big toe, heel. normal gait proceed from heel, forefoot and big toe over time. While normal gait proceeds, values of heel, forefoot and big toe can be changed over time. So Each values of pressure sensors over time could discriminate whether it is normal or abnormal gait. Measuring Device consists of non-inverting amplifiers and low pass filter. Through timetable of values, normal gait pattern can be analyzed, because of supported weight of foot. Also, the peak value of pressure can judge whether it is walking or running. While people are running, insole of shoes is floating in the air on moment. Using this algorithm, gait analysis and step count can be measured.

• Korean Business Review
• /
• v.2
• /
• pp.171-204
• /
• 1989

The adaptive accounting control system can be regarded as an realistic control system which can adapt itself to uncertain enviromental changes. It has characters that can measure the extend to which we attain our goals and give intelligence, which is essential to planning for the future and for decision making. The budget should present the aim of the compilation of the budget and synthesize the limit through the systematic plan about the utilization of resources, because is a financial plan that is used as estimate of future management operations and as a control of it. If we would like to make good use of this business budget as a tool for planning, we should try to opimize all over the business by relating business operation as far as the effective use of the economic resources in business and the supplying of it are concerned and financial budgets to the responsibility unit center. As this paper is about the budgetary management pattern of marketing based on the adaptive accounting control system, I shall begin with a description of the feature and role of responsible accounting system in management accounting. I shall also deal with the Ex ante accounting system and the Ex post optimum accounting system which are essential to the control stage of business budgeting. And finally, accounting to the control process of adaptive accounting system that fit in with the reality, I shall design a budgetary management pattern of marking section. I wish this paper would be helpful to the activity of budgetary management. A budget is an important step of diverging point. Consequently, when we set up a budgetary pattern based on the adaptive accounting system as far as the control accounting is concerned. I believe that the step of responsible accounting will be a more elaborate and scientific step of management.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.6
• /
• pp.794-798
• /
• 2004

An attempt was made to improve the efficiency of growth and lactation performance of dairy heifers subjected to a stair-step growth scheme using rice straw as the sole roughage source. Twenty-four young Holstein heifers were randomly assigned to either control or test group. The control diet met the National Research Council (NRC) requirement, with heifers calving at 24 to 26 mo of age. The test group was individually fed according to a schedule of 3, 2, 4, 2, 5 and 2 mo in which feed intake was alternately 20% below or 25% above the NRC requirements. Heifers on the stair-step growth pattern gained more body weight and consumed less dry matter (10.80 and 11.22%, respectively), resulting an increasing growth efficiency compared with the control. Body condition, first estrus, first conception, services per conception and calving difficulty (data not shown) were not affected. Milk yield of the test group was 8.5% higher than that of the control group. During the early lactation period, the milk yield was significantly higher in the stair-step group than in that of the control group (p<0.05). Milk composition was not affected by compensatory growth induced by the stair-step scheme. Also, weight at calving and calf growth performance was not affected by stair-step growth. The results indicate that using rice straw as a sole roughage source in a stair-step compensatory growth scheme can contribute to the improvement of growth efficiency and early lactation performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.457-464
• /
• 1999

The object of this study is form finding, stress-strain analysis and cutting pattern analysis of membrane structures under the following assumptions : (1) material is linearly elastic (2) stress state is plane stress. The cable and membrane structures undergo large deformation because of its highly flexibility, therefore, we must take account of its geometric nonlinearity. The analysis procedure is consisted of three steps considering geometric nonlinearity unlike any other structures. First step is the form finding analysis to determine the initial equilibrium shape. Second step is the stress-strain analysis to investigate the behaviors of structures under various external loads. Once a stationary shape has been fount a cutting pattern based on the form finding analysis may be generated for manufacturing procedure. In this paper, form finding, stress-strain analysis and cutting pattern analysis is carried out for applying to Seoguipo worldcup soccer stadium roof structures and optimal cutting pattern analysis technique is proposed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.116-120
• /
• 2015

In this paper, a step type driver dipole antenna with a tapered balance and unbalance (balun) by a coplanar waveguide (CPW) to coplanar strip (CPS) transition is proposed. The proposed antenna consisted of step type driver, a CPW to CPS transition and tapered balun. The proposed antenna is realized the multi and wide resonate frequency band to introduce the step type driver and tapered balun. The step type driver is acted as a director too. This antenna could be more easily designed than the conventional printed quasi-Yagi dipole antenna. The operating frequency bandwidth was 650 [MHz] (2.65~3.3 GHz), 900 [MHz] (4.7~5.6 GHz) under a return-loss criterion of less than 10 dB. The measurements of the proposed antenna exhibited good results in the wideband operating frequency and radiation pattern. The proposed antenna can support wireless communications applications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1427-1435
• /
• 2010

The present study was conducted to examine the effect of a stair-stepped feed intake pattern on growth, feed efficiency, and meat quality of Hanwoo steers. Twenty-seven 11-month-old Hanwoo steers were randomly divided into three groups. The control group was fed according to the Korean steer feeding program, and the other two groups were fed according to an alternated feeding schedule of 3-2-4-2 months. During the first three months of the experiment, treatment group 1 (T1) and treatment group 2 (T2) were fed 20% and 30% less than the control group, respectively. For the following two months, the T1 group was fed 20% more than the control group while the T2 group was fed 20% less than the control group. In the third step, T1 and T2 groups were fed 20% and 10% less, respectively, than the control group for four months. In the last two months, T1 and T2 groups were fed 20% more than the control group. After the stair-step feeding trial, steers were fed concentrated feed ad libitum for five months. The altered feed intake pattern did not affect daily body weight gain. However, daily feed intake tended to decrease and growth efficiency tended to increase in the two treatment groups compared to the control group. Altered feed intake also affected blood metabolite levels. The serum glucose and BUN level of the T1 group increased in the first re-fed period compared to the T2 and control groups. The serum cholesterol level of the T2 group decreased in the first restricted-re-fed growth period compared to the T1 and control groups. The serum NEFA levels of the two treatment groups increased from the first restricted period compared to the controls. The serum insulin level of the T2 group increased in the last period compared to the T1 and control groups. Regarding meat yield index, the control group was significantly higher than the T2 group (p<0.05). Regarding meat yield grade, the carcass back fat thickness of the T2 group was significantly higher than the control group (p<0.05). In marbling score, the T1 group was the highest (4.9), followed by the control group (4.1) and the T2 group (4.0). These results indicate that using a stair-stepped growth pattern (T1) can contribute to improvements in growth efficiency and muscle marbling.

• The Korean Journal of Applied Statistics
• /
• v.35 no.3
• /
• pp.407-419
• /
• 2022

The semiconductor fabrication process is complex and time-consuming. There are sometimes errors in the process, which results in defective die on the wafer bin map (WBM). We can detect the faulty WBM by finding some patterns caused by dies. When one manually seeks the failure on WBM, it takes a long time due to the enormous number of WBMs. We suggest a two-step approach to discover the probable pattern on the WBMs in this paper. The first step is to separate the normal WBMs from the defective WBMs. We adapt a hierarchical clustering for de-noising, which nicely performs this work by wisely tuning the number of minimum points and the cutting height. Once declared as a faulty WBM, then it moves to the next step. In the second step, we classify the patterns among the defective WBMs. For this purpose, we extract features from the WBM. Then machine learning algorithm classifies the pattern. We use a real WBM data set (WM-811K) released by Taiwan semiconductor manufacturing company.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.59-72
• /
• 2010

WIM(Weigh-In-Motion) is the system measuring the weight of the vehicle with a high-speed. In the existing WIM system, vehicle weight is measured based on the constant speed and the error ratio has 10%. However, because of measuring the driving pattern, that is abnormal driving pattern which is like the acceleration and down-shift of the drivers, it has the error ratio which is bigger than the real. In order to it reduces the error ratio of WIM system, the improved WIM system needs to find the abnormal driving pattern. In order to reducing the error ratio of these WIM systems, the improved WIM system can find abnormal driving patterns. In this paper, the improved WIM system which analyzes the abnormality driving pattern influencing on the error ratio of WIM system of an existing and minimizes the error span is designed. The improved WIM system has the multi step loop structure of adding the loop sensor to an existing system. In addition, the measure function defined as an intrinsic is improved and the weight measured by the abnormal driving pattern is amended. The analysis of experiment result improved WIM system can know the fact that the error span reduces by 8% less than in the existing the maximum average sampling error 22.98%.

• Journal of the Korean Society of Costume
• /
• v.65 no.2
• /
• pp.62-74
• /
• 2015

The purpose of this research is to analyse the process of development and verification of 'National Competency Standards' of Hanbok production, which was carried out in 2013 for the fashion industry. As the result of this research, the definition of the duty in Hanbok production is 'to conduct a series of step-by-step processes of planning and developing fabric and design, then making pattern, cutting fabric and sewing.' The competency unit for Hanbok production is analyzed in 10 categories: analysis of market trends, design plan, production and manipulation of fabric, production process plan, sample making, pattern making, cutting out, sewing, finishing sewing, inspection of the product quality. Competency unit elements of each competency unit are as follows. 1) analysis of market trends: to research market trend resources, to analyse consumers' buying trend, to analyse industry changes, 2) design plan: to develop design, to plan fabrication, to draw flats, 3) production and manipulation of fabric: to develop fabric planning, to prepare fabric manipulation, to conduct fabric manipulation, 4) production process plan: to grasp design, to plan sewing method, to prepare a specification sheet, 5) sample making: to make a sample pattern, to cut sample fabrics, to sew sample, to finish sample making, 6) pattern making: to measure body, to make production pattern, to adjust production pattern, 7) cutting out: to care fabrics, to lay out patterns, to cut out fabrics, 8) sewing: to sew a garment, to sew a lining, to attach a lining, 9) finishing sewing: to neaten edges, to attach trims, to press to finish, 10) inspection of the product quality: to confirm correspondence with the specification sheet, to inspect appearance.