• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.285-291
• /
• 2014

PURPOSE: The purpose of this study was to propose clinical criteria to differentiate patients who are able to perform the step-through-step gait pattern in chronic stroke patients. METHODS: Sixty patients with chronic stroke patients participated this study. To differentiate patients who could perform the step-through-step gait pattern, age, gender, and causes of stroke were noted, a Chedoke-McMaster (CM) damage list, Fugl-Meyer (FM) assessment scales and the Berg Balance Scale (BBS) were determined. A 10 meter gait test and Timed Up and Go (TUG) test were conducted to determine the differences in gait speed and dynamic balance between patients walking with or without canes in the step-through-step gait pattern group. RESULTS: There was no significant statistical difference in age, gender, and stroke type between all subjects. There were significant differences in the CM scale for postural and lower extremities, and FM scale for lower extremities and BBS. The dynamic balance ability and gait speed showed significant differences between the subjects in the step-through-step gait pattern with or without a cane during gait. CONCLUSION: CM and FM scales for the lower extremities and postural control, as well as BBS scales, can be used as criteria to differentiate patients who are able to perform the step-through-step gait pattern. These results can also be used to provide beneficial information to patients that are walking with canes.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.1-8
• /
• 1994

In this paper, we propose an efficient two-step pattern matching method which promises shape distortion-tolerant recognition of handwritten of handwritten Hangul syllables. In the first step, nonlinear shape normalization is carried out to compensate for global shape distortions in handwritten characters, then a preliminary classification based on simple pattern matching is performed. In the next step, nonlinear pattern matching which achieves best matching between input and reference pattern is carried out to compensate for local shape distortions, then detailed classification which determines the final result of classification is performed. As the performance of recognition systems based on pattern matching methods is greatly effected by the quality of reference patterns. we construct reference patterns by combining the proposed nonlinear pattern matching method with a well-known averaging techniques. Experimental results reveal that recognition performance is greatly improved by the proposed two-step pattern matching method and the reference pattern construction scheme.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.4
• /
• pp.267-275
• /
• 2011

This paper proposes a new quickly convergent pattern search quasi-Newton algorithm that employs the multi-step version of the Symmetric Rank One (SRI). The new algorithm works on the factorizations of the inverse Hessian approximations to make available a sequence of convergent positive bases required by the pattern search process. The algorithm, in principle, resembles that developed in [1] with multi-step methods dominating the dervation and with numerical improvements incurred, as shown by the numerical results presented herein.

• Mycobiology
• /
• v.39 no.1
• /
• pp.67-69
• /
• 2011

A cell-free extract of Saccharomyces cerevisiae containing the angiotensin I-converting enzyme (ACE) inhibitory peptide was treated in a successive simulated gastric-intestinal bioreactor (step 1: amylase digestion, step 2: gastric fluid digestion, step 3: intestinal fluid digestion) to illustrate the absorption pattern of antihypertensive ACE inhibitory peptide, and the ACE inhibitory activities of each step were determined. Total ACE inhibitory activities of step 1, step 2, and step 3 were 55.96%, 80.09%, and 76.77%, respectively. The peptide sequence of each steps was analyzed by MS/MS spectrophotometry. Eleven kinds of representative peptide sequences were conserved in each step, and representative new peptides including RLPTESVPEPK were identified in step 3.

• The Research Journal of the Costume Culture
• /
• v.18 no.6
• /
• pp.1165-1178
• /
• 2010

This study is aimed at developing low waist slacks pattern with high satisfaction measurements and beauty for the tween generation girls. For this study, the research method was as follows. By extracting and analyzing industrial and educational slacks pattern, beautiful and motion-suitable slacks pattern will be created. This study presents the ideal slacks pattern that has great fit to tween generation girls by comparing and analyzing the previous 2 slacks pattern studies and the real clothing test. The constructed pattern in the 1st step was modified and adjusted from the best industrial patterns' the location of waist line, waist line gradient, rear waist bottom crotch, hip bottom crotch, dart length, the ease of hip girth, the fitness of rear bottom crotch line which were not well-estimated. The 2nd step was appearance and movement test based on the 1st study. In The 3rd step, the 2nd step was chosen as the final slacks study pattern for its superior appearance & movement satisfaction comparing with other patterns.

• Communications for Statistical Applications and Methods
• /
• v.12 no.2
• /
• pp.473-481
• /
• 2005

The testing problem for sphericity structure of the covariance matrix in a multivariate normal distribution is introduced when there is a sample with 2-step monotone missing data pattern. The maximum likelihood method is described to estimate the parameters on the basis of the sample. Using these estimates, the likelihood ratio criterion for testing sphericity is derived.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.55-62
• /
• 2021

In order to improve fuel economy and reduce CO2, HEV adopts ISG system as a standard. This ISG system increased the electric load that the battery had to bear, and the number of starting increased rapidly. AGM Lead Acid batteries have been developed and used, but the charging time is about three times longer as the electrolyte amount control during formation must be maintained at a higher level compared to conventional lead-acid batteries. In this study, we tried to shorten the charging time by increasing the charging efficiency through the optimization of the formation pattern. In order to optimize the Formation Pattern, 10 charging steps and 6 discharging steps were applied to 16 multi steps, and the charging current for each step was controlled, and the test was conducted under 4 conditions (21 hr, 24 hr, 27 hr, 30 hr). As a result of simultaneous application of multi-step and discharge step, it was verified that minimizing the current loss and eliminating the sudden polarization during charging contributes to the improvement of charging efficiency. As a result, it showed excellent results in reducing the charging time by about 30 % with improved charging efficiency compared to the previous one.

• Tribology and Lubricants
• /
• v.34 no.6
• /
• pp.226-234
• /
• 2018

Copper chemical mechanical planarization (CMP) has become a key process in integrated circuit (IC) technology. The results of copper CMP depend not only on the mechanical abrasion, but also on the slurry chemistry. The slurry used for Cu CMP is known to have greater chemical reactivity than mechanical material removal. The Cu CMP slurry is composed of abrasive particles, an oxidizing agent, a complexing agent, and a corrosion inhibitor. Citric acid can be used as the complexing agent in Cu CMP slurries, and is widely used for post-CMP cleaning. Although many studies have investigated the effect of citric acid on Cu CMP, no studies have yet been conducted on the interfacial friction characteristics and step height reduction in CMP patterns. In this study, the effect of citric acid on the friction characteristics and step height reduction in a copper wafer with varying pattern densities during CMP are investigated. The prepared slurry consists of citric acid ($C_6H_8O_7$), hydrogen peroxide ($H_2O_2$), and colloidal silica. The friction force is found to depend on the concentration of citric acid in the copper CMP slurry. The step heights of the patterns decrease rapidly with decreasing citric acid concentration in the copper CMP slurry. The step height of the copper pattern decreases more slowly in high-density regions than in low-density regions.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.339-342
• /
• 2005

We present an efficient block-based motion estimation algorithm with motion analysis. The motion analysis determines a size of search pattern and a maximum repeated count of search pattern. In case of large movement in large image, we reduce search points and the local minimum which caused by low performance. The proposed algorithm employs with searching step of 2. The first step determines an initial search point with neighbor block vector and a size of initial search pattern. The second step determines a size of search pattern and a maximum repeated count with motion analysis. We improve motion prediction accuracy while reducing required computational complexity compared to other fast block-based motion estimation algorithms.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.449-455
• /
• 2011

Electric drive vehicles (EDV) have received much attention recently because of their environmental and energy benefits. In an EDV, the motor drive system directly influences the performance of the propulsion system. However, the available DC voltage is limited, which limits the maximum speed of the motors. At high speeds, the inverter voltage increases if the square wave (SW) voltage (six-step operation) is used. Although conventional direct torque control (DTC) has several advantages, it cannot work in the six-step mode required in high-speed applications. In this paper, a single-mode seamless DTC for AC motors is proposed. In this scheme, the trajectory of the reference flux changes continuously between circular and hexagonal paths. Therefore, the armature voltage changes smoothly from a high-frequency switching pattern to a square wave pattern without torque discontinuity. In addition, because multi-mode controllers are not used, implementation is more straightforward. Simulation results show the voltage pattern changes smoothly when the motor speed changes, and consequently, torque control without torque discontinuity is possible in the field weakening area even with a six-step voltage pattern.