• Title/Summary/Keyword: Step Size

Search Result 1,945, Processing Time 0.033 seconds

Development of program for calculation of representative bed-material size by using MS ExcelTM (MS ExcelTM을 이용한 하상재료의 대표입경 계산 프로그램 개발)

  • Lee, Chanjoo;Nam, Ji-Su;Lee, In
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.334-334
    • /
    • 2017
  • Representative particle sizes(RPS) are commonly used for particle size distribution of heterogeneous sediment such as bed material. RPS can provide not only information of mean characteristics of sediment, but also other properties like sorting, skewness, kurtosis. For sediment including sand and clay material, RPS is estimated through two steps. The first is experimental step for calculating weight of each size class, the next is interpolation step to get RPS by using the graph plot. At the second step, graph method known as direct reading of value along the interpolation line in the graph plot is commonly used. This method is often time-consuming job. In this study we developed a new program to get RPS by using MS Excel. Simple linear and semi-log interpolation are used. When compared with conventional graph method(direct reading), simple linear shows 5.31%, while semi-log 1.29% of relative difference. We developed MS Excel program for estimation of RPS automatically.

  • PDF

Fabrication of Ultra Small Size Hole Array on Thin Metal Foil (초미세 금속 박판 홀 어레이 가공)

  • Rhim S. H.;Son Y. K.;Oh S. I.
    • Transactions of Materials Processing
    • /
    • v.15 no.1 s.82
    • /
    • pp.9-14
    • /
    • 2006
  • In the present research, the simultaneous punching of ultra small size hole of $2\~10\;{\mu}m$ in diameter on flat rolled thin metal foils was conducted with elastic polymer punch. Workpiece used in the present investigation were the rolled pure copper of $3{\mu}m$ in thickness and CP titanium of 1.5fm in thickness. The metal foils were punched with the dies and arrays of circular and rectangular holes were made. The process set-up is similar to that of the flexible rubber pad farming or Guerin process. Arrays of holes were punched successfully in one step forming. The punched holes were examined in terms of their dimensions. The effects of the wafer die hole dimension and heat treatment of the workpiece on ultra small size hole formation of the thin foil were discussed. The process condition such as proper die shape, pressure, pressure rate and diameter-thickness ratio (d/t) were also discussed. The results in this paper show that the present method can be successfully applied to the fabrication of ultra small size hole away in a one step operation.

An Experimental Study on Micro Drilling Using Step Feed (스텝이송방식을 이용한 미세구멍가공에 관한 실험적 연구)

  • Han, J.U.;Won, J.S.;Jung, Y.G.
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.13 no.12
    • /
    • pp.46-53
    • /
    • 1996
  • Micro drilling is one of the most important machining types and its necessity becomes more and more increasing in the whole field of industry. Micro drilling, however, has few the case of practical application, because it requests high techniques : manufacturing micro drill, treating chip, producting precise hole shape and progressing machining effeciency. Micro drilling has a technical problem: drill breakage from the lack of drill rigdity and the interuption of chip. It is, therefore, essential to select the proper cutting conditions and the step fed for the method solving the lack of rigidity and the interruption of chip. Especially, step feed is very efficient to avoid the breakage of drill, but bring about reducing of cutting efficiency. The study on step feed must be requested more than the present in the near future. The purpose of this paper is to investigate experimentally about cutting conditions which affect on tools and round errors and to estimate about the effect of step feed as well as optimal step feed size to solve the breakage of drill.

  • PDF

STEP-Based CAE/CAO Information Exchange (STEP을 이용한 CAE/CAO 정보교환)

  • Baek, Ju-Hwan;Min, Seung-Jae
    • Proceedings of the KSME Conference
    • /
    • 2003.04a
    • /
    • pp.1234-1239
    • /
    • 2003
  • In the product design process computer-aided engineering and optimization tools are widely utilized in order to reduce the total development time and cost. Since several simulation tools are involved in the process, information losses, omissions, or errors are common and the importance of seamless information exchange among the tools has been increased. In this study ISO STEP standards are adopted to represent the neutral format for CAE/CAO information exchange. The schema of AP209 is used to define the information of finite element analysis and the new schema is proposed to describe the information of structural optimization based on the STEP methodology. The schema is implemented by EXPRESS, information modeling language, and ST-Developer is employed to generate C++ classes and STEP Rose Library by using the schema denoted. To substantiate the proposed approach, the information access interfaces of the finite element modeling software (FEMAP), structural optimization software (GENESIS) and in-house topology optimization program are developed. Examples of the size optimization of a three-bar truss and topology optimization of a MBB beam are shown to validate the information exchange of finite element analysis and structural optimization using STEP standards.

  • PDF

Experiment on Conservation Treatment Method(PEG, Sucrose and Lactitol) and Degree of State-change with RH of Waterlogged Archaeological Wood (수침고목재(水浸古木材)의 보존(保存)을 위한 PEG, Sucrose, Lactitol 처리(處理) 및 습도조건(濕度條件)에 따른 상태변화(狀態變化) 실험(實驗))

  • Yi, Yong-hee;Kim, Soo-choul;Park, Young-man;Kim, Kyoung-su
    • Conservation Science in Museum
    • /
    • v.2
    • /
    • pp.19-25
    • /
    • 2000
  • In order to studies proper conservation treatment condition of waterlogged archaeological wood excavated from wetland in Shinchang-dong, Kwangju, 2 kinds of wooden objects were treated with PEG(Poly-Ethylene Glycol), sucrose and lactitol and their size stability and relative humidity were analyzed and compared each other. The result showed that Quercus spp. had the highest size stability in 2 Step-PEG treatment using PEG#200(MW:200) and PEG#4000 (MW:3,350) and Acer spp. was the highest in treatment using only PEG#4000. In relative humidity test after treatment 2 Step-PEG treatment showed the lowest size stability. In the meantime, sucrose and lactitol-treated sample was fast for penetration, sucrose-treated sample showed a sharp increase for penetration in as high as 84% humidity condition and medicine flew out a lot and lactitol-treated sample got enlarged with fine cracking(splitting) in relative humidity test. In relative humidity test, the samples showed cracking(splitting) in all treatment materials except for 2 Step-PEG treatment. This study showed that waterlogged archaeological wood excavated from Shinchang-dong had the highest size stability and highest adaptation to humidity change in case of treatment with 2 Step-PEG.

Decision of Optimum Turn Step Resolution for Extraction of the Spurious Radiation in Gigahertz Band (기가헤르쯔 대역 불요파 방사의 최대값 추출을 위한 최적 회전 스텝 분해능 결정)

  • 허민호;윤영중;정삼영;공성식
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.14 no.1
    • /
    • pp.8-13
    • /
    • 2003
  • In this paper, suitablility of 1 GHz CISPR limits establishment fur broadcast communication quality protection is examined and the optimum turn step resolution of EUT for spurious measurement of frequency above 1 GHz to increase the accuracy of maximum values extraction is examined. As a result of 500 MHz and 1.7 GHz clock speed personal computer of micro-processor measurement, optimum turn step resolution extracted by National Institution of National Instrument of Standard & Technology(NIST) Koepke method is estimated 40 table positions per polarization in 500 MHz. And in case of 1.7 GHz, step size is 36 table positions. Prediction of turn step size required for fully scan method in gjgahertz measurement will increase measurement accuracy and reduce considerable measurement time as well.

An Analytic Study on factors Affecting the School Nurse's Activities in Daegu City and Kyungpook Province (대구.경북지역 일부 양호교사의 업무수행에 미치는 요인분석)

  • Gwak, Oh-Gae
    • Research in Community and Public Health Nursing
    • /
    • v.1 no.1
    • /
    • pp.503-517
    • /
    • 1989
  • This study is to analyze factors affecting the school nurse's activities. The survey was undertaken during Sept. 1-Nov. 30, 1986. The subjects were 137 school nurses from elementary, junior-high, and senior-high schools in Daegu City and Kyungppk Province. The results are as follows: 1. Correlational findings between school nurse's self-confidence and their general characteristics 1) Program Planning & Evaluation: Health Experinece(r=-0.1803, p<0.05) Salary Step(r=-0.1741, p<0.05) 2) Clinic Management: Salary STep(r=-0.2580, p<0.01) 3) Health Education: Salary Step(r=-0.1929, p<0.05) 4) Management of School Environment: Salary Step(r=-0.2501, p<.05) 5) Health Care Services: Health Experience(r=0.1901, p<0.05) Salary Step(r=-0.2424, p<0.05) 2. The degrees of school nurse's self-confidence(high: 4 point, low: 1 point) 1) Clinic Management: 2.92 2) Health Education: 2.86. 3) Program Planning & Evaluation: 2.74 4) Health Care Services: 2.73 5) Management of School Environment: 2.67 6) Operating of School Health Organization: 2.42 3. Significances to self-confidence on school nurse's activities 1) Program Planning as Evaluation: Expending Times for Health Care Services (r=-0.2262, p<0.05) Expending Times for Health Education (r=0.2943, p<0.05) Size of Clinic(r=0.2163, p<0.05) Location of Clinic(t=2.43, gH0.047) Use of Clinic(t=2.06, p<0.007) 2) Clinic Management: Location of Clinic (t=3.36, p<0.010) 3) Health Education: Purchase of Medicine(r=-0.1736, p<0.05) No, of Classes (r=-0.1794, p<0.05) (4) Management of School Environment: School Health Budget(r=0.1731, p<0.05) Home Message(r=0.1805, p<0.05) Location of Clinic(t=4.46, p<0.0001) 5) Operating of School Health Organization: School Health Budget(r=0.1878, p<0.05) Use of Clinic(t:1.90, p<0.018) 6) Health Care Services: School Health Budget(r=1.90, p<0.018) Expending Times for Health Education(r=0.2577, p<0.05) Size of Clinic(r=0.4336, p<0.001) Location of Clinic(t:5.10, p<0.001)

  • PDF

Effect of Direct Emulsification Method and Invert Emulsification Method On Droplet Size of O/W Emulsion (O/W 에멀젼 입자의 크기에 미치는 Direct 유화법과 Invert유화법의 효과)

  • 김철훈;박재길
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.20 no.1
    • /
    • pp.64-81
    • /
    • 1994
  • O/W emulsions with mixed nonionic surfactants(polyoxyethylene(20)sorbitan monostearate/sorbitan sesquioleate), liquid paraffin, water prepared by direct inversion emulisification method and continuous inversion emulsification Method. The one-step, two-step and three-step phase inversion emulsification method were used in experiments. Effect of added water on droplet size of final O/W emulsions which is prepared by phase inversion emulsification method were investigated. In direct inversion emulsification method(two-step emulsification method), fine and homogeneous droplets of OIW emulsions were formed after phase inversion steps i.e. ,W/O - (W/O) If double emulsion - O/W emulsion. In continuous inversion emulsification method(three-step emulsification method), fine and homogeneous O/W emulsion were formed after phase inversion steps i.e., W/O - pseudomicroemulsion - O/W. By latter method, more Fine and homogenuous droplets were formed than former method. 10-10, 8 HLB region of mixed non-ionic surfactants could produce most fine droplets. This HLB region had maximum values of solubilization water and This HLB value of mixed nonionic surfactants produced fine and homogenuous droplets.

  • PDF

Quality Strategy for Building a Smart Factory in the Fourth Industrial Revolution (4차 산업혁명시대의 스마트 팩토리 구축을 위한 품질전략)

  • Chong, Hye Ran;Bae, Kyoung Han;Lee, Min Koo;Kwon, Hyuck Moo;Hong, Sung Hoon
    • Journal of Korean Society for Quality Management
    • /
    • v.48 no.1
    • /
    • pp.87-105
    • /
    • 2020
  • Purpose: This paper aims to propose a practical strategy for smart factories and a step-by-step quality strategy according to the maturity of smart factory construction. Methods: The characteristics, compositional requirements, and diagnosis system are examined for smart factories through theoretical considerations. Several cases of implementing smart factory are studied considering the company maturity level from the aspect of the smartness concept. And specific quality techniques and innovation activities are carefully reviewed. Results: The maturity level of smart factory was classified into five phases: 1) ICT non-application, 2) basic, 3) intermediate 1, 4) intermediate 2, 5) advanced level. A five-step quality strategy was established on the basis of case studies; identify, measure, analyze, optimize, and customize. Some quality techniques are introduced for step-by-step implementation of quality strategies. Conclusion: To build a successful smart factory, it is necessary to establish a quality strategy that suits the culture and size of the company. The quality management strategy proposed in this paper is expected to contribute to the establishment of appropriate strategies for the size and purpose of the company.

Effects of Pressurization on Finger's Blood Velocity of Tendon and Muscle Areas in Forearm of 20's male (20대 남성의 아래팔 손목 건영역과 근육영역 가압이 손가락 혈류속도에 미치는 효과)

  • Kim, Nam Yim;Hong, Kyunghi
    • Fashion & Textile Research Journal
    • /
    • v.21 no.4
    • /
    • pp.488-496
    • /
    • 2019
  • This study investigated if the proper pressure level on the wrist tendon area and muscle area of the lower arm are within the same range by examining the responses of blood flow and subjective evaluation. Subjects consisted of 18 males in their 20s, and the experimental bands were custom-made by applying size measurements of each subject. In the experiment, a total of 5 steps were selected by reducing 10 (Step 1) to 50 (Step 5)% from the original body size in the circumferential direction. Blood flow was measured with a sensor attached to the tip of the finger inside the right hand while sitting in a chair for 15 minutes. Blood velocity began to increase (0.82 kPa) when the wrist circumference around tendon area was reduced by 20% (Step 2) and reached its maximum (1.72 kPa) at Step 4. However, the preferred subjective pressure was 1.36 kPa, which was less than the maximum pressure value of 1.72 kPa for Step 4. Blood velocity began to increase when pressure on the muscle area was 1.38 kPa and reached its maximum at 2.16 kPa; however, the most preferred clothing pressure was 1.71 kPa. The results of this study showed that the appropriate pressure level was higher in the muscle area than in the wrist tendon of the lower arm and indicated that graduated compression is favorable.