• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.355-362
• /
• 2008

One of the popular domestic sewage treatment process (called step feed oxic-anoxic-oxic process) for nitrogen removal was analyzed in this study by theoretical analysis based on the nitrification and denitrification reaction. Total nitrogen removal efficiency was suggested by considering influent qualities(i.e., ammonia, nitrite, nitrate, alkalinity, and COD). Total nitrogen removal efficiency depends on r (influent allocation ratio). In the case that all influent components are enough, the total nitrogen removal follows equation 100-b/(1+b), when r is 1/(1+b). Finally, it can be concluded that step feed oxic-anoxic-oxic process could be effective for nitrogen removal.

• 한국물환경학회지
• /
• 제25권2호
• /
• pp.322-328
• /
• 2009

The advantage of simultaneous nitrification and denitrification (SND) is to reduce requirement of oxygen as well as tank volume. The fludized media was used in the oxic (aerobic) tank of Membrane-BNR to enhance the efficiency of SND. Nowadays, the interest of applying membrane to the wastewater treatment plant has been increased, which is proved by a lot of research published about the MBR. The Membrane-BNR, consisted of total 5 reactors might be called the compact process by using the fludized media and having short HRT of 6.5 hr. It could attain the further removal of not only the organics but also nutrients such as T-N and T-P. The mode A and B were identified with or without the step feed of influent. The mode A was classified with 3 modes according to the different DO concentration in the fludized media aerobic reactor, and the mode B with step feed was operated with the optimum DO condition. The step-feed was capable of improving TN removal efficiency under the domestic wastewater with the low ratio C/N. On the other hand, the efficiency of SND with the 1.0~1.5 mg/L DO in the oxic media tank was better than the one with below 1.0 mg/L, on which the nitrification did not happen enough, and with above 3.5 mg/L, on which the reduction of anoxic area in the tank happened. It means that the profitable nitrification should be performed prior to the denitrification step. The removal efficiency of nitrogen by SND was about 20% among of total denitrified nitrogen. And some organic carbon consumed could be reduced by the endogeneous denitrification.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권6호
• /
• pp.841-846
• /
• 2014

The present study was conducted to determine whether the two-step time-restricted feeding improves the fattening traits of one-step time-restricted feeding in geese. Thirty-six 8-wk-old geese were allotted into one of three groups. Group R1 (the 1-step restricted feeding group) was allowed access to feed for 2 h in the morning from 8 wk to 14 wk of age. Group R2 (the 2-step restricted feeding group) was treated as Group R1, but was additionally fed for 2 h in the afternoon from 12 wk to 14 wk of age. Group C (the control group) was fed ad libitum from 8 wk to 14 wk of age. Feed intake and body weight (BW) were recorded daily and weekly, respectively. At 14 wk of age, the blood samples were collected to determine the fasting plasma levels of glucose, triacylglycerols and uric acid before sacrifice. The results showed that daily feed intake (DFI) was lower, feed efficiency (FE) was higher in both Groups R1 and R2 than in Group C, and daily gain (DG) in Group R2 was higher than in Group R1 during the whole experimental period (p<0.05). Group R1 exhibited lower abdominal and visceral fat weights in carcass than did Group C (p<0.05), and Group R2 was in intermediate. The fasting plasma glucose levels in Group C were higher, and triacylglycerol levels in Group R1 were higher, compared with the other groups (p<0.05). It is concluded that time-restricted feeding in the fattening period not only increases FE but reduces DFI, and the additional meal during the late fattening period improves the DG without the expense of FE in geese.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1176-1181
• /
• 1995

Microdrilling is one of the most difficult operations because of the poor chip discharge and the weakness of tool. This study is concerned about the development of a microdrilling monitoring system that is useful for minimizing the tool breakage and enhancing the machinability in the air spindle based microdrilling. The system is composed of a drilling state detection unit and an adaptive step-feed control unit that controls the micro-stepping motor driven spindle axis. Drilling states such as overload, tood breakage are recognized by the change of the air spindle speed which is measured via the reflective photo sensor. Based on the monitoring results, the adaptive step-feed control algorithm adjusts the step increment to keep the decrease of spindle speed within a specified range. The results of evaluation tests have shown that the developed system is very effective to prevent the breakage of microdrill and improves the productivity in comparison with the conventional microdrilling.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.47-53
• /
• 2006

An Experiment was carried out to find the scheme far minimization of burr formation on inclined exit surface in drilling. Several drills with different geometry are used for drilling the workpiece with inclined exit surface. Step drills are specified with step angle and step size. The influence of the inclination angle of exit surface on burr formation was observed, which enables to analyze the burr formation mechanism on inclined exit surface. Along the edge on the inclined exit surface, burrs are formed by the bending deflection to feed direction and also burrs are formed in exit direction of cutting edge. To minimize the burr formed in feed direction, the corner angle which is formed by the inclination angle and step angle must be large enough not to be bent to burr. By decreasing step angle of drill and decreasing the distance between two axes of two holes, burr formation at the intersecting holes can be minimized. Burr formation mechanisms are analyzed according to the drill geometries and cutting conditions. Several schemes far burr minimization on inclined exit surface were proposed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.198-203
• /
• 1992

There are two important variables in machining process control, which are feed and cutting speed. It is possible to improve the machining accuracy and the productivity by maintaining the optimal feed and cutting speed. IN this work, a controller is designed to achieve on-line cutting force control based on the modeling of cutting process dynamics established through step response test. Two schemes are proposed and implemented. The first is feed control under the constant spindle speed and the second is spindle speed control under the constant feed. Finally, both are proved to work properly through simulation and experimentation.

• 환경기술인
• /
• 통권177호
• /
• pp.78-84
• /
• 2001

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.73-74
• /
• 2000

In recent years, attempts have been made to greatly improve the display quality of active-matrix liquid crystal display devices, and many techniques have been proposed to solve such problems as gate signal delay, feed-through voltage and image sticking[1-3]. To improve these problems which are caused by the feed-through voltage, we have evaluated new driving methods to reduce the feed-through voltage. Two level gate-pulse was used for the gate driving of the cst-on-common structure pixels. These gate driving methods offer better feed-through characteristics than conventional simple gate pulse. Optimized step signal will compensate by step pulse time and voltage. The evaluation of the suggested driving methods were performed by using a TFT-LCD array simulator PDAST which can simulate the gate, data and pixel voltages of a certain pixel at any time and at any location on a TFT array. The effect of the new driving method was effectively analyzed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권11호
• /
• pp.1427-1435
• /
• 2010

The present study was conducted to examine the effect of a stair-stepped feed intake pattern on growth, feed efficiency, and meat quality of Hanwoo steers. Twenty-seven 11-month-old Hanwoo steers were randomly divided into three groups. The control group was fed according to the Korean steer feeding program, and the other two groups were fed according to an alternated feeding schedule of 3-2-4-2 months. During the first three months of the experiment, treatment group 1 (T1) and treatment group 2 (T2) were fed 20% and 30% less than the control group, respectively. For the following two months, the T1 group was fed 20% more than the control group while the T2 group was fed 20% less than the control group. In the third step, T1 and T2 groups were fed 20% and 10% less, respectively, than the control group for four months. In the last two months, T1 and T2 groups were fed 20% more than the control group. After the stair-step feeding trial, steers were fed concentrated feed ad libitum for five months. The altered feed intake pattern did not affect daily body weight gain. However, daily feed intake tended to decrease and growth efficiency tended to increase in the two treatment groups compared to the control group. Altered feed intake also affected blood metabolite levels. The serum glucose and BUN level of the T1 group increased in the first re-fed period compared to the T2 and control groups. The serum cholesterol level of the T2 group decreased in the first restricted-re-fed growth period compared to the T1 and control groups. The serum NEFA levels of the two treatment groups increased from the first restricted period compared to the controls. The serum insulin level of the T2 group increased in the last period compared to the T1 and control groups. Regarding meat yield index, the control group was significantly higher than the T2 group (p<0.05). Regarding meat yield grade, the carcass back fat thickness of the T2 group was significantly higher than the control group (p<0.05). In marbling score, the T1 group was the highest (4.9), followed by the control group (4.1) and the T2 group (4.0). These results indicate that using a stair-stepped growth pattern (T1) can contribute to improvements in growth efficiency and muscle marbling.

• Food Science and Biotechnology
• /
• 제18권3호
• /
• pp.641-648
• /
• 2009

A one-step simultaneous immunchromatographic (OS-ICG) assay using colloidal gold-monoclonal antibody (gold-MAb) conjugates was developed for the rapid multianalysis of aflatoxin B1 (AFB1) and ochratoxin A (OTA) in feed samples. Visual detection limits for AFB1 and OTA were 0.5 and 2.5 ng/mL, respectively, and the results were obtained within 15 min. Matrix interference from the feed extracts was efficiently reduced by appropriate dilution with buffer. Cut-off values of the OS-ICG assay for the feed spiked with AFB1/OTA mixtures (5/5, 10/10, 25/25, 50/55, 100/100 ${\mu}g/kg$) were 10 and 50 ${\mu}g/kg$ for AFB1 and OTA. The comparative analyses of 65 feed samples by OS-ICG, enzyme-linked immunosorbent assay (ELISA), and high performance liquid chromatography (HPLC) showed good agreement. In this study, we confirmed that simultaneous analysis based on immunoassay is possible and it can be used as an on-site multianalysis of AFB1 and OTA in feed, food, and agricultural products.