• Title/Summary/Keyword: Stem height

Search Result 880, Processing Time 0.032 seconds

Composition and Diversity of Tree Species in Kamalachari Natural Forest of Chittagong South Forest Division, Bangladesh

  • Hossain, M. Akhter;Hossain, M. Kamal;Alam, M. Shafiul;Uddin, M. Main
    • Journal of Forest and Environmental Science
    • /
    • v.31 no.3
    • /
    • pp.192-201
    • /
    • 2015
  • Information on plant diversity and community structure are required to chalk out necessary actions for conservation management. The present study assessed the composition and diversity of tree species in Kamalachari Natural Forest of Chittagong South Forest Division, Bangladesh, during April 2010 to November 2011. A total of 107 tree species belonging to 72 genera and 37 families were recorded, where Moraceae family was represented by maximum (11) species. Density, Basal area and volume of tree species were $418{\pm}20.09stem/ha$, $21.10{\pm}2.62m^2/ha$ and $417.4{\pm}79.8m^3/ha$ respectively. Diameter and height class distribution of tree species revealed an almost reverse J-shaped curve. Both the number of species and percentage of tree individuals were maximum in the lower DBH and height ranges. Anthropogenic disturbances like illegal tree cutting, over extraction, settlement inside forest area etc. were noticed during the study, which are supposed to cause gradual decrease of both tree species and individuals in the higher DBH and height classes. However, Artocarpus chama was found dominant showing maximum IVI followed by Schima wallichii, Aporosa wallichii, and Lithocarpus acuminata. The quantitative structure of the tree species of Kamalachari natural forest is comparable to other tree species rich tropical natural forests. The findings of the study may help in monitoring future plant population changes of the identified species and adopting species specific conservation programs in Kamalachari natural forest.

Effects of Planting Density and Fertilizer Level on Agronomic Characteristics and Yield of Solanum njgrum L. (재식밀도와 시비량이 야생약초 까마중(Solanum njgrum L.)의 주요 형질과 수량에 미치는 영향)

  • 최성규;이종일
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.36 no.4
    • /
    • pp.340-344
    • /
    • 1991
  • This study was investigated to find out the optimum planting densities fo Solanum njrum L. about growth characters. yield components and yield at 6 planting densities by direct sowing culture. The results obtained are summarized as follows: Studying the correlationship. the highly negative significances were found between planting densities and fresh eights weights per plant, on the other hand, the highly positive significances were found between planting densities and plant height. Plant height was long in dense planting, and short in spacious planting by direct sowing culture. Stem diameter was thick in spacious planting. and was thin in dense planting. Fresh wt. per plant was decreased in dense planting and was increased in spacious planting by direct sowing culture. Yield was highest in dense planting densities (10 x 20cm : 50plants/$m^2$) by direct sowing culture. Fertilizing ((N: P$_2$O$_{5}$ $K_2$O=6 : 6 : 6Kg/10a) was increased than without fertilizing because plant height and number of branch was good.d.

  • PDF

Growth Characteristics as Affected by Shading and Pruning Height of Above-ground Part in Two-year Old Gypsophila paniculata during Over-summer (2년생 안개초 여름철 차광 및 지상부 절단 높이에 따른 생육반응)

  • Cheong, Dong-Chun;Lim, Hoi-Chun;Kim, Kab-Cheol;Song, Young-Ju;Kim, Jeong-Man
    • FLOWER RESEARCH JOURNAL
    • /
    • v.17 no.3
    • /
    • pp.185-189
    • /
    • 2009
  • This study was carried out to investigate the effect of shading (50% or not) and pruning height (3cm, 6cm, and 9cm) of remained above-ground plant part on shoot emergence aspect, mortality rate, flowering and cut flower characteristics of two years old Gypsophila paniculata plants. Days to shoot emergence (80%) advanced, emerged shoot number increased and mortality rate surveyed on late October decreased in 50% shading treatment. In addition to, mortality rate decreased, as above-ground plant part was highly pruned. Blooming was earlier with highly pruning the remained above-ground pan and under non-shading condition than shading. Growth traits such flower stalk length, primary branches number, stem diameter, and cut flower yield were the best and also non-particulate rate and rosette formation rate were the lowest in pruning height of 9cm under non-shading condition.

Noncontact measurements of the morphological phenotypes of sorghum using 3D LiDAR point cloud

  • Eun-Sung, Park;Ajay Patel, Kumar;Muhammad Akbar Andi, Arief;Rahul, Joshi;Hongseok, Lee;Byoung-Kwan, Cho
    • Korean Journal of Agricultural Science
    • /
    • v.49 no.3
    • /
    • pp.483-493
    • /
    • 2022
  • It is important to improve the efficiency of plant breeding and crop yield to fulfill increasing food demands. In plant phenotyping studies, the capability to correlate morphological traits such as plant height, stem diameter, leaf length, leaf width, leaf angle and size of panicle of the plants has an important role. However, manual phenotyping of plants is prone to human errors and is labor intensive and time-consuming. Hence, it is important to develop techniques that measure plant phenotypic traits accurately and rapidly. The aim of this study was to determine the feasibility of point cloud data based on a 3D light detection and ranging (LiDAR) system for plant phenotyping. The obtained results were then verified through manually acquired data from the sorghum samples. This study measured the plant height, plant crown diameter and the panicle height and diameter. The R2 of each trait was 0.83, 0.94, 0.90, and 0.90, and the root mean square error (RMSE) was 6.8 cm, 1.82 cm, 5.7 mm, and 7.8 mm, respectively. The results showed good correlation between the point cloud data and manually acquired data for plant phenotyping. The results indicate that the 3D LiDAR system has potential to measure the phenotypes of sorghum in a rapid and accurate way.

Development of an Automatic Grafting Robot for Fruit Vegetables using Image Recognition (영상인식 기술 이용 과채류 접목로봇 개발)

  • Kang, Dong Hyeon;Lee, Si Young;Kim, Jong Koo;Park, Min Jung;Son, Jin Kwan;Yun, Sung-Wook
    • Journal of Bio-Environment Control
    • /
    • v.28 no.4
    • /
    • pp.322-327
    • /
    • 2019
  • This study was conducted to improve the performance of automatic grafting robot using image recognition technique. The stem diameters of tomatoes and cucumber at the time of grafting were $2.5{\pm}0.3mm$ and $2.2{\pm}0.2mm$ for scions and $3.1{\pm}0.7mm$ and $3.6{\pm}0.3mm$ for rootstocks, respectively. The grafting failure was occurred when the different height between scions and rootstocks were over 4 mm and below 2 mm due to the small contact area of both cutting surface. Therefore, it was found that the height difference at the cutting surface of 3 mm is appropriate. This study also found that grafting failure was occurred when the stem diameters of both scions and rootstocks were thin. Therefore, it was suggested to use at least one stem with thicker than the average stem diameter. Field survey on the cutting angle of stems by hand were ranged from 13 to 55 degree for scions and 15 to 67 degree for rootstocks, respectively, which indicates that this could cause the grafting failure problem. However, the automatic grafting robot developed in this study rotates the seedlings 90 degree and then the stems are cut using a cutting blade. The control part of robot use all images taken from grafting process to determine the distance between a center of both ends of stem and a gripper center and then control the rotation angle of a gripper. Overall, this study found that The performance of automatic grafting robot using image recognition technique was superior with the grafting success rates of cucumber and tomato as $96{\pm}3.2%$ and $95{\pm}4%$, respectively.

Studies on Dry Matter Production and Variation of Agronomic Characteristics of Determinate and Indeterminate Types of Soybean Cultivars (Glycine max L.) Under Different Growing Condition (유ㆍ무한형대두품종의 재배조건에 따른 건물생산 및 형질변이에 관한 연구)

  • Keun-Yong Park
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.17
    • /
    • pp.45-78
    • /
    • 1974
  • To provide useful information for developing new high yielding soybean varieties and for improving cultural practices, an investigation was made on variation of dry matter production and on relationship among several agronomic characters of soybean plants grown under different planting times and densities as well as under different fertilizer levels, using Kwang-kyo, Dong puk-tae, and Suke # 51 as determinate types and Shelby, SRF-300 and Harosoy as indeterminate types at the Crop Experiment Station during the period of 1972 and 1973. The results obtained were summarized as follow: 1. The dry weight, CGR and LAI at the initial flowering stage were high in the high plant population irrespective of varieties, planting times, and fertilizer levels. However, those characters of the indeterminate type were lower than those of the determinate types. The same characters of the indererminate type at the terminal leaf stage were either same or higher than those of the determinate types. 2. The dry weight of the determinate type at the initial flowering stage was similar to the indeterminate, type, when planting times were May 21 or June 15. The dry weights of both types of varieties were low when planted on July 10. When fertilizer levels were increased, the CGR, dry weight and LAI at the initial flowering stages were also increased. 3. Even though significant differences of LAI were obtained among the varieties within the same plant type, the indeterminate type was in general lower than that of the determinate type regardless of planting time and densities, or fertilizer levels, while the yield of the indeterminate type was comparable to the yield of the determinate type. 4. The high degree of leaf- and petiole-fall at the greenbean stage was highly associated with early planting and high levels of fertilizers. However, less amount of leaf- or petiole-fall was found when planted on July 10 or under low plant population. 5. The percent of stem weight was high under higher plant population, while the percent of leaf weight was high under lower plant population. When planting time was late, the percent of stem and petiole weight were reduced, while the leaf weight was increased. 6. The percent of pod weight of the determinate type at the terminal leaf stage was about 2% when planted on May 21, about 8% when planted on June 15, and about 9% when planted on July 10. The percent of pod weight of the indeterminate type at the terminal leaf stage were about 6 % when planted on May 21, 14% when planted on June 15 and 21% when planted on July 10. 7. Kwang kyo showed less degree of leaf-fall even when lodged due to high levels of fertilizer applied, while SRF-300 showed great damage due to lodging. 8. High yields were obtained when planted on May 21, but there were little yield differences between yields from May 21 and June 15 plantings. The reduction of yield due to late planting of July 10 was less apparent in the determinate type of varieties, while it was high in the indeterminate type. 9. The optimum plant population per are for high yield was 1, 250 to 2, 500 plants when planted on May 21, 2, 500 plants when planted on June 15, and 3, 333 plants when planted on July 10. 10. High correlation coefficients were obtained between dry matter weight and LAI at the terminal leaf stages, and between the dry matter weight and yield at the greenbean stages. The optimum dry weight for high yield in the determinate type was expected to be 25 kg. per are at the initial flowering stage and 50 kg. per are at the terminal leaf stage. In the indeterminate type the LAI and dry weight at the greenbean stage were 4 to 5 and 80 kg. per are, respectively. 11. Under the high plant population plant height was increased, while the stem diameter and the number of nodes and branches were reduced. Consequently, the percent of mainstem to main stem plus branches were increased, and the length of internode was also elongated. The ratios of stem weight, number of nodes and pods, and yield of main stem were increased when high plant population was associated with the early planting. The percent of main stem to branches for the indeterminate type was higher than that of the determinate type. 12. Under the high plant densities and late planting, the percent of the pod number and yields of main stem were increased, indicating that varieties with no or less branches were better adaptable under such conditions. 13. High degree of simple correlation coefficients was obtained between the LAI at the initial flowering stage and terminal leaf stage, and the total node number, dry matter and dry stem weight of both determinate and indeterminate types. Even though no significant correlation was found between the LAI at the initial flowering stage of the determinate type and the stem length and pod number per are, highly significant correlation coefficients were obtained between such characters in the indeterminate type of varieties. 14. The dry matter was positively correlated with the LAI, CGR, stem length, and pod number, node number and dry stem weight per are, while no significant correlation was found between the dry matter and stem diameter. 15. The correlation coefficients between lodging index and the LAI, dry weight, stem length and dry stem weight were highly significant. Negative correlation was obtained for the indeterminate type between the stem diameter and lodging index. The correlation coefficient between the stem diameter and lodging index was non-significant for the determinate type, while positive correlation was obtained between the yield and lodging index in the determinate type. The lodging index was also positively correlated with average length of internode of main stem. 16. The 100 seed weight appeared to be lowered under the high plant population and no fertilizer condition, and when planted late. Apparent differences of 100 seed weight were found between main stem and branches, being higher for the main stem than for the branches. 17. No variation of protein content was found due to different cultural practices. However, the oil content was apparently reduced when planted late.

  • PDF

Reduction of Stem Cavity and Improvement of Flower Quality in Chrysanthemum 'Baekma' by Hydroponic Culture (양액재배에 의한 국화 '백마'의 줄기공동 경감과 절화품질 향상)

  • Hwang, In Taek;Cho, Kyung Chul;Kim, Hee Gon;Ki, Gwang Yeon;Yoon, Bong Ki;Kim, Jung Guen;Lim, Jin Hee;Choi, Sung Ryul;Shin, Hak Ki
    • FLOWER RESEARCH JOURNAL
    • /
    • v.17 no.4
    • /
    • pp.251-255
    • /
    • 2009
  • This study was conducted to investigate effect of ionic strength and feeding times of a nutrient solution on reduction of stem cavity size and improvement of flower quality in chrysanthemum 'Baekma'. A nutrient solution was applied with different strengths at three stages, namely, transplanting, budding, and flowering. The solution EC was adjusted as 1.61.82.0, 1.81.81.8, 1.82.01.8, and $2.02.02.0dS{\cdot}m^{-1}$ in four treatments. Feeding frequency per a day were 4 times for 12 min., 8 times for 6 min., 12 times for 4 min., and 18 times for 2.7 min. each. Cut flower length as affected by different strengths of a nutrient solution was the greatest in the plot of EC $2.02.02.0dS{\cdot}m^{-1}$. However number of leaves, stem diameter, and leaf size were greater in EC $1.82.01.8dS{\cdot}m^{-1}$ than in other treatments. Also, petal number of petals was the greatest and stem cavity size was the smallest in the plot of EC $1.81.81.8dS{\cdot}m^{-1}$. Plant height, number of leaves, stem diameter, leaf size were greater in the plot with 12 times feed ing per a day. number of petal was most in the plot with 8 times feeding per day, while stem cavity size was the smallest in the plot with 12 times feed ing per a day. Therefore, the better plant growth, the smaller stem cavity size.

Growth Characteristics as Influenced by Cutting Site and Planting Method in Autumn Field Cutting of Sedum sarmentosum (돌나물의 가을 노지삽목에서 삽수부위 및 삽식방법에 따른 생육특성)

  • Ahn, Jeong-Ho;Kwon, Ji-Woong;Bae, Jong-Hyang;Lee, Seung-Yeob
    • Journal of Bio-Environment Control
    • /
    • v.17 no.1
    • /
    • pp.60-65
    • /
    • 2008
  • For autumn field cutting of Sedum sarmentosum, the effects of cutting site (distal, middle, and proximal) and planting method (space drill seeding, drill seeding, and broadcast seeding) on survival rate and growth characteristics were investigated at pre- and post-winter season. Plant height root length, stem number per plant, number of branch per plant, fresh weight of shoot, and dry weight of shoot were significantly superior in distal site at pre-wintering (40 days after cutting). At post-wintering (May 10th), stem number per plant, fresh weight and dry weight per $m^2$ in cutting of distal site showed a significant increasement compared to the cutting of proximal site. At pre-wintering (40 days after cutting), the growth in space drill seeding was well than that in drill seeding and broadcast seeding, and fresh weight and dry weight per $m^2$ in space drill seeding were high in order of space drill seeding, broadcast seeding, and drill seeding. At post-wintering (May 10th), stem number per plant, fresh weight and dry weight per $m^2$ in space drill seeding were significantly increased than those in drill seeding. Accordingly, the cutting using distal site of stem in autumn field cutting was desirable for the growth and shoot yield. The space drill seeding showed the highest yield potential among three seeding methods, but broadcast seeding was favorable in saving of labor, because the fresh weight of shoot in broadcast seeding was similar in the space drill seeding at post-wintering.

Ecological Characteristics of Collected Small Grain Soybean (Glycine max L.) Varieties (수집(蒐集) 소립(小粒)콩의 주요 생태적(生態的) 특성(特性))

  • Park, Ki Sun;Cho, Jin Woong;Song, Hi Sup;Choi, Jae Yeul;Ku, Ja Hyeong;Kim, Choong Soo
    • Korean Journal of Agricultural Science
    • /
    • v.25 no.1
    • /
    • pp.6-11
    • /
    • 1998
  • Bean sprout is one of the traditional vegetable in Korea and produced by sprouting soybean (Glycine max L.) cultivars. This experiments was conducted to investigate the ecological characteristics in collected small grain soybean lines from Chungnam province region. Thirty varieties were used in this study. Seed coat color of collected small soybean lines showed eight different types. Major seed coat color type was yellow as 8 lines of total 35 lines. The stem height, number of nodes and number of branches averaged 58.5 cm, 16.5 nodes and 11.8 branches, respectively. The average number of main stem pods and number of branching pod were appeared 43.1 and 62.7 respectively. One hundred seed weight averaged 9.9g which was lower than 10~12g of sprouting soybean cultivars as breeding goal of Korea. The average of node width showed 13.2cm and long stem open types and short stem close types were classified 1 line and 14 lines. The flower dates of collecting small soybean lines were between 8 Aug. and 13 Aug. and flowering duration was 74~85 days. The date of maturity were between 12 Sep. and 12 Oct., and maturity duration showed great variation among cultivated soybean lines.

  • PDF

Effect of Stem Cell Transplantation on Pain Behavior and Locomotor Function in Spinal Cord Contusion Model

  • Park, Hea-Woon;Kim, Su-Jeong;Cho, Yun-Woo;Hwang, Se-Jin;Lee, Won-Yub;Ahn, Sang-Ho;Jang, Sung-Ho
    • The Journal of Korean Physical Therapy
    • /
    • v.22 no.3
    • /
    • pp.79-85
    • /
    • 2010
  • Purpose: Many trials for new therapeutic approaches such as stem cell-based transplantation have been conducted to improve the repair and regeneration of injured cord tissue and to restore functions following spinal cord injury (SCI) in animals and humans. Adipose tissue-derived stromal cells (ATSCs) have multi-lineage potential to differentiate into cells with neuron-like morphology. Most studies of stem cell transplantation therapy after SCI are focused on cellular regeneration and restoration of motor function, but not on unwanted effects after transplantation such as neuropathic pain. This study was focused on whether transplantation of ATSCs could facilitate or attenuate hindpaw pain responses to heat, cold and mechanical stimulation, as well as on improvement of locomotor function in a rat with SCI. Methods: A spinal cord injury rat model was produced using an NYU impactor by dropping a 10 g rod from a height of 25 mm on to the T9 segment. Human ATSCs (hATSCs; approximately $5{\times}10^5$ cells) or DMEM were injected into the perilesional area 9 days after the SCI. After transplantation, hindpaw withdrawal responses to heat, cold and mechanical allodynia were measured over 7 weeks. Motor recovery on the Basso, Beattie, and Bresnahan (BBB) locomotor rating scale and on the inclined plane test were also evaluated. Results: The present study demonstrated that increased hindpaw withdrawal responses to cold allodynia was observed in both groups after transplantation, but the development of cold-induced allodynia in the hATSC transplantation group was significantly larger than in the control group. The difference between the two groups in locomotor functional improvement after SCI was also significant. Conclusion: Careful consideration not only of optimal functional benefits but also of unintended side effects such as neuropathic pain is necessary before stem cell transplantation therapy after SCI.