• Korean Journal of Plant Resources
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1988

This experiment were carried out to study the heritability, genotypic, pheno-typic and environmental correlation in four edible oil crops. Heritabilities of flowering date, maturing date, plant height and weight of 1, 000 grains in rape were high. A highly significant positive correlation was found between flowering date and maturing date, plant hight and ear length, number of pods per ear and flowering date, maturing date and plant hight, The number of seed per pod showed also significant positive correlation with flowering or maturing date as well as with the relationship between weight of 1, 000 grains and plant height or ear length inrapeseed, respectively. Heritabilities of maturing date, length of stem with eapsule and number of seed per capsule were high, in sesame. Genotypic correlation between plant height and length of stem with capsule, length of stem with capsule and number of capsule per plant, number of capsule per plant and weight of 1, 000 grains, weight of 1, 000 grains and yield were highy positive in sesame. Heritabilities of flowering date, length of main stem, weight of 100 grains and number of shells per square meter in peanut were high, There was positive genotypic correlation between length of main stem and yield, number of shells per quare meter and matured seed ratio, number of shells per square meter and yield, 100 grains weight and yield. On the other hand, a significant negative correlation appeared between flowering date and yield. Heritabilities of days to flowering, stem length, stem diameter and weight of 1, 000 grains in perila were high. There was positive genotypic correlation between stem length and stem diameter, number of pods per plant, stem weight etc, between number of internodes and number of pods per plant, stem weight, number of valid branches and number of pods plant as well, respectively. While, a significant negative correlation was observed between number of valid branches and weight of 1, 000 grains, between number of pods per plant and weight of 1, 000 grains.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.622-629
• /
• 2022

The study aim was to derive a stem taper equation for Phyllostachys pubescens, a type of bamboo in South Korea, and to develop a stem volume table. To derive the stem taper equation, three stem taper models (Max & Burkhart, Kozak, and Lee) were used. Since bamboo stalks are hollow because of its woody characteristics, the outer and inner diameters of the tree were calculated, and connecting them enabled estimating the tree curves. The results of the three equations for estimating the outer and inner diameters led to selection of the Kozak model for determining the optimal stem taper because it had the highest fitness index and lowest error and bias. We used the Kozak model to estimate the diameter of Phyllostachys pubescens by stem height, which proved optimal, and drew the stem curve. After checking the residual degree in the stem taper equation, all residuals were distributed around "0", which proved the suitability of the equation. To calculate the stem volume of Phyllostachys pubescens, a rotating cube was created by rotating the stem curve with the outer diameter at 360°, and the volume was calculated by applying Smalian's method. The volume of Phyllostachys pubescens was calculated by deducting the inner diameter calculated volume from the outer diameter calculated volume. The volume of Phyllostachys pubescens was only 20~30% of the volume of Larix kaempferi, which is a general species. However, considering the current trees/ha of Phyllostachys pubescens and the amount of bamboo shoots generated every year, the individual tree volume was predicted to be small, but the volume/ha was not very different or perhaps more. The significance of this study is the stem taper equation and stem volume table for Phyllostachys pubescens developed for the first time in South Korea. The results are expected to be used as basic data for bamboo trading that is in increasing public and industrial demand and carbon absorption estimation.

• Journal of Environmental Science International
• /
• v.33 no.7
• /
• pp.453-462
• /
• 2024

This study was carried out for the purpose of selecting the most appropriate taper equation for the actual stands of Pinus thunbergii in the southern coastal region of Korea and then developing a stem volume table to provide basic data for rational management. To develop a volume table of Pinus thunbergii in this region of Korea, 59 sample trees with various diameter distributions were selected and stem analysis was performed. As a result of stem analysis, two trees with abnormal diameter and height growth as the age increased were rejected, and 57 trees were analyzed. To develop the taper equation, seven major variable exponential equations were used, including Kozak 1988, 1994, 2001, 2002, Bi 2000, Muhairwe 1999, and Sharma and Parton 2009. As a result of parameter estimation and statistical verification, the Kozak 1988 model showed the highest goodness of fit with Fit I (Fit Index), RMSE 1.5620, Bias 0.0031, and MAD 1.0784. The diameter of each 10cm stem ridge for the selected model was estimated, and a stem volume table was produced using the mensuration of division (end area formula) using the Smalian equation. As a result of two-sample T-test for volume table of this study and current yield table, the volume for this study was found to be significantly larger at all observation points (p < 0.001). Even for the same tree species, it is judged that differentiated volume tables are needed for each growth environment characteristic.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.126-134
• /
• 2006

In this study, the effect of stem-end design on contact pressure and stress distribution in revision TKR was investigated using finite element method. The finite element model of tibia, including the cortical bone, the cancellous bone and canal, was developed based on CT images. The implant models with various stem lengths, diameters, friction coefficients, and press-fit effects were considered. The results showed that the longer stem length, the stronger press-fit, the bigger stem diameter, and the higher friction coefficient increased both peak contact pressure and Von-Mises stress distributions. The results supported the clinical hypothesis that peak contact pressure and stress are related to the stem end pain. The results of this study will be useful to design the stem and reduce the end-of-stem pain in revision TKR.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.362-368
• /
• 2007

This study was conducted to estimate merchantable volume and yield per diameter (DBH) class of Pinus koraiensis and Larix kaempferi. Stem volume of trees in each diameter class was calculated using the existing equations for taper and height curve. Saw logs and pulpwood volume were then estimated from the stem volume in each diameter class. The final step was to estimate merchantable volume and yield from saw logs, assuming saw logs were used for lumber (boards or dimension products) production only. The results showed that the stem volume of Larix kaempferi was 23~38% higher than that of Pinus koraiensis at the same diameter classes. Both species were able to produce saw logs from the diameter class of 18 cm. Saw logs and pulpwood yield for both species rapidly increased due to the size limitation on small end diameter. This yield reached a maximum of 90% and 88% at 26 cm and 38cm diameter class, respectively, for Pinus koraiensis and Larix kaempferi. Lumber yield estimated for board products ranged from 23% to 56%. In the case of dimension products, Lumber yield became significantly smaller as saw logs were used for larger dimension products. These results can be used for calculating merchantable volume and economic value of trees, as well as determining final lumber products.

• Journal of Korean Society of Forest Science
• /
• v.17 no.1
• /
• pp.17-22
• /
• 1973

A study on the wood quality from planted Pinus koraiensis Sieb. et Zucc. has been undertaken by the University Forest in order to gain results of the gross structural features of stem. For this study some groups of trees were felled and several characteristics such as the degree of stem, slenderness, eccentric growth, heartwood diameter, height of butt sweep and butt-swell were analyzed. The results of the study are as follows. 1) The relation between diameter of log and its height in sample trees are nearly parallel to each other. But their degrees of slenderness in logs cut from intermediate and codominant trees are some what gentle as compared with that of logs from dominant tree. 2) The eccentric growth at transverse section of sample trees is generally decreased with the increase of tree height on all sample trees. 3) On the eccentric growth at transverse section of tree, a rather distinct tendency was noticed that all of sample trees showed the direction of eccentric growth in $R_2$ side. 4) Heartwood diameter appeares to become larger as tree growth decrease under same diameter of logs and log diameter in which heartwood appeares is larger in rapid growth rate trees. 5) The maximum height of butt-sweep generally shows that the larger the breast height diameter of tree is, the smaller its height becomes. On the contrary it was noticed that the larger the breast height diameter of trees, the higher the maximum height of butt-swell became. The direction of butt-sweep and butt-swell were shown in $R_1$ side in all sample trees.

• Korean Journal of Agricultural Science
• /
• v.1 no.1
• /
• pp.5-8
• /
• 1974

To obtain several foundamental information for the breeding of Korean Ginseng. 16 line selecteds in Korea were investigated and analyzed. The results obtained are as follows : 1. In all quantitative genetic characters of Korean Ginseng, the stem length showed the highest heritability(0.7050) and the leaf length the lowest(0.5674). 2. The genotypic correlation was showen the highest value (0.8649) at between the leaf length and the stem diameter and the lowest value(0.8649) at between the leaf length and the stem length, but the phnotypic correlation was shown the highest value (0.8788) at between the stem length and the stem dimeter and the lowest value (0.7950) at between the leaf length and stem length. 3. The co-heritability between the stem length and the stem diameter showed the highest value(0.6124) and that between the leaf length and the stem length showed the lowest value(0.5471). 4. The inter-class correlation among the planting location showed the highest value at the stem length and the lowest value at the stem diameter.

• Journal of Ginseng Research
• /
• v.19 no.2
• /
• pp.165-170
• /
• 1995

This study was carried out to investigate the correlation of agronomic characters, their path coefficients in 2, 3 and 4-year old ginseng plants, and to provide a useful information for ginseng breeding. Correlation coefficients between stem fen변h, number of leaves and number of Iraflets in 2-year age, and stem diameter and leaf length in 3-year age showed highly significant correlation with number of fruits and root weight in 4-year age. The path coefficient analysis indicated that stem length and number of leaflets might give indirect effects on root weight regardless of plant age. On the other hand, stem length and number of leaflets in 2-year age and, stem diameter and leaf length in 3-year age showed direct effects on root weight in 4-year old ginseng. These results may be used for selection of high-yielding ginseng plants. Key words Selection information, correlation and path coefficient analysis.

• Korean Journal of Plant Resources
• /
• v.25 no.6
• /
• pp.745-752
• /
• 2012

Compared to wide ranges of genetic variation of natural populations, very limited Miscanthus cultivar has been released. This study was the first report on the development of Miscanthus cultivar by means of radiation breeding. Seeds of M. sinensis were initially exposed to gamma rays of 250 Gy for 24 h, generated from a $^{60}Co$ gamma-irradiator. The irradiated seeds were sown and then the highly tiller-producing mutants were selected for this study. Biomass-related parameters including tiller number, plant height, stem diameter, and leaf number were measured. Ploidy level and internal transcribed spacer (ITS) were investigated to characterize the mutants compared to wild type (WT) Miscanthus. Plant height and tiller number were negatively related, where multi-tillering mutants were relatively short after 4 month growth. However stem diameter and leaf number were greater in mutants. All the materials used in this study were diploid, implying that the mutants with greater tiller numbers and stem diameter were not likely related to polyploidization. Based on the sequence of ITS regions, the mutants demonstrated base changes from the gamma irradiation where G+C content (%) was decreased in the ITS1, but increased in ITS2 when compared to WT sequence. ITS2 region was more variable than in ITS1 in the mutants, which collectively allows identification of the mutants from WT. Those mutants having enhanced tillers and allelic variations might be used as breeding materials for enhanced biomass-producing Miscanthus cultivars.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.275-283
• /
• 2010

This study was conducted to examine the changes in growths of tomato and watermelon seedlings and the relationship among growth parameters which are used to evaluate healthy seedling as affected by shading. Plants were grown under 0%, 25%, 50%, and 75% shadings using polyethylene films. Leaf area index (LAI) of tomato and grafted watermelon seedlings increased under 50% and 75% shading. Total dry weight decreased with increase of shading level. The growth rates of stem diameter, LAI, total weight were faster under 50% and 75% shading with increase of integral radiation than under 0% and 25% shading. Stem diameters of tomato and grafted watermelon seedlings showed no significant differences among shading regimes. Stem diameters of tomato seedlings had upward tendency with increase of total dry weight and shoot height, but there were no significant differences among shading regimes. Stem diameters of grafted watermelon seedlings had no relationship with shoot height. These results indicate that stem diameter of tomato seedlings is not appropriate for assessing seedlings quality but stem diameter of grafted watermelon seedlings with shoot height is available.