• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.251-255
• /
• 2009

This study was conducted to investigate effect of ionic strength and feeding times of a nutrient solution on reduction of stem cavity size and improvement of flower quality in chrysanthemum 'Baekma'. A nutrient solution was applied with different strengths at three stages, namely, transplanting, budding, and flowering. The solution EC was adjusted as 1.61.82.0, 1.81.81.8, 1.82.01.8, and $2.02.02.0dS{\cdot}m^{-1}$ in four treatments. Feeding frequency per a day were 4 times for 12 min., 8 times for 6 min., 12 times for 4 min., and 18 times for 2.7 min. each. Cut flower length as affected by different strengths of a nutrient solution was the greatest in the plot of EC $2.02.02.0dS{\cdot}m^{-1}$. However number of leaves, stem diameter, and leaf size were greater in EC $1.82.01.8dS{\cdot}m^{-1}$ than in other treatments. Also, petal number of petals was the greatest and stem cavity size was the smallest in the plot of EC $1.81.81.8dS{\cdot}m^{-1}$. Plant height, number of leaves, stem diameter, leaf size were greater in the plot with 12 times feed ing per a day. number of petal was most in the plot with 8 times feeding per day, while stem cavity size was the smallest in the plot with 12 times feed ing per a day. Therefore, the better plant growth, the smaller stem cavity size.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.331-337
• /
• 2001

This study was performed to develope stem analysis program(Stemwin1.0) which can be used in PC with MS-Windows operating system. Stemwin1.0 uses width of annual tree ring measured with 1/100mm unit, and calculate increments of several growth factors such as DBH, height and volume with various methods. Mean DBH can be calculated by arithmetic and quadratic mean methods. Height can be estimated by parallel line, line extending and height curve methods. Volume can be estimated by Huber, Smalian, and Spline functions. Not only Total growth, Mean Annual Increment(MAI) and Current Annual Increment(CAI) of growth factors, but also merchantable volume and height, form factor, growth rate, and merchantable volume rate are automatically calculated. Stemwin1.0 can also output accurate stem taper curve with various scale, and prepare stem taper data(diameter at different disk heights) for statistical analysis for deriving stem taper model. Stemwin1.0 can export output data and graph to Excel for more compatible use of it.

• Archives of Plastic Surgery
• /
• v.40 no.5
• /
• pp.496-504
• /
• 2013

Background Amniotic-fluid-derived stem cells and amniocytes have recently been determined to have wound healing effects, but their mechanism is not yet clearly understood. In this study, the effects of amniotic fluid stem cells and amniocytes on wound healing were investigated through animal experiments. Methods On the back of Sprague-Dawley rats, four circular full-thickness skin wounds 2 cm in diameter were created. The wounds were classified into the following four types: a control group using Tegaderm disc wound dressings and experimental groups using collagen discs, amniotic fluid stem cell discs, and amniocyte discs. The wounds were assessed through macroscopic histological examination and immunohistochemistry over a period of time. Results The amniotic fluid stem cell and amniocyte groups showed higher wound healing rates compared with the control group; histologically, the inflammatory cell invasion disappeared more quickly in these groups, and there was more significant angiogenesis. In particular, these groups had significant promotion of epithelial cell reproduction, collagen fiber formation, and angiogenesis during the initial 10 days of the wound healing process. The potency of transforming growth factor-${\beta}$ and fibronectin in the experimental group was much greater than that in the control group in the early stage of the wound healing process. In later stages, however, no significant difference was observed. Conclusions The amniotic fluid stem cells and amniocytes were confirmed to have accelerated the inflammatory stage to contribute to an enhanced cure rate and shortened wound healing period. Therefore, they hold promise as wound treatment agents.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.357-366
• /
• 2015

This study was conducted to estimate carbon stocks of Quercus serrata with drawing volume of trees in each tree height and DBH applying the suitable stem taper equation and tree specific carbon emission factors, using collected growth data from all over the country. Information on distribution area, tree number per hectare, tree volume and volume stocks were obtained from the $5^{th}$ National Forest Inventory (2006~2010), and method provided in IPCC GPG was applied to estimate carbon storage and removals. Performance in predicting stem diameter at a specific point along a stem in Quercus serrata by applying Kozak's model,$d=a_1DBH^{a_2}a_3^{DBH}X^{b_1Z^2+b_2ln(Z+0.001)+b_3{\sqrt{Z}}+b_4e^Z+b_5({\frac{DBH}{H}})}$, which is well known equation in stem taper estimation, was evaluated with validations statistics, Fitness Index, Bias and Standard Error of Bias. Consequently, Kozak's model turned out to be suitable in all validations statistics. Stem volume tables of Quercus serrata were derived by applying Kozak's model and carbon stock tables in each tree height and DBH were developed with country-specific carbon emission factors ($WD=0.65t/m^3$, BEF=1.55, R=0.43) of Quercus serrata. As a result of carbon stock analysis by age class in Quercus serrata, carbon stocks of IV age class (11,358 ha, 36.5%) and V age class (10,432; 33.5%) which take up the largest area in distribution of age class were 957,000 tC and 1,312,000 tC. Total carbon stocks of Quercus serrata were 3,191,000 tC which is 3% compared with total percentage of broad-leaved forest and carbon sequestration per hectare(ha) was 3.8 tC/ha/yr, $13.9tCO_2/ha/yr$, respectively.

• Journal of Climate Change Research
• /
• v.8 no.4
• /
• pp.415-424
• /
• 2017

This study was conducted to estimate carbon stocks of Pinus densiflora with drawing volume of trees in each tree height and DBH applying the suitable stem taper equation and tree specific carbon emission factors, using collected growth data from all over the country. Information on distribution area, tree age, tree number per hectare, tree volume and volume stocks were obtained from the $5^{th}$ National Forest Inventory (2006~2010) and Statistical yearbook of forest (2016), and method provided in IPCC GPG was applied to estimate carbon stock and uptake. Performance in predicting stem diameter at a specific point along a stem in Pinus densiflora by applying Kozak's model, $d=a_{1}DBH^{a_2}a_3^{DBH}X^{b_{1}Z^2+b_2ln(Z+0.001)+b_3\sqrt{Z}+b_4e^z+b_5(\frac{DBH}{H})}$, which is well known equation in stem taper estimation, was evaluated with validations statistics, Fitness Index, Bias and Standard Error of Bias. Consequently, Kozak's model turned out to be suitable in all validations statistics. Stem volume table of P. densiflora was derived by applying Kozak's model and carbon stock tables in each tree height and DBH were developed with country-specific carbon emission factors ($WD=0.445t/m^3$, BEF = 1.445, R = 0.255) of P. densiflora. As the results of analysis in carbon uptake for each province, the values were high with Gangwon-do $9.4tCO_2/ha/yr$, Gyeongsandnam-do and Gyeonggi-do $8.7tCO_2/ha/yr$, Chungcheongnam-do $7.9tCO_2/ha/yr$ and Gyeongsangbuk-do $7.8tCO_2/ha/yr$ in order, and Jeju-do was the lowest with $6.8tC/ha/yr$. Total carbon stocks of P. densiflora were 127,677 thousands tC which is 25.5% compared with total percentage of forest and carbon stock per hectare (ha) was $84.5tC/ha/yr$ and $7.8tCO_2/ha/yr$, respectively.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.298-305
• /
• 2011

This study was conducted to enhance the stem firmness of standard chrysanthemum 'Baekma' bred in Korea for commercial quality improvement and inhibition of stem breaking during transportation through foliar spray with calcium agents. Calcium agent screening 'Baekma' was examined using $CaCl_2{\cdot}2H_2O$, $Ca(NO_3)_2{\cdot}4H_2O$, and OS-Ca (natural liquid calcium compounds extracted from oyster shell) depending on each concentration (0, 0.001, 0.01, 0.1, and 1.0%, respectively). All calcium agents sprayed with 1.0% caused chemical injury such as stem bending or leaf burn. OS-Ca also showed more sensitive response to chemical injury than the other calcium agents because OS-Ca was absorbed very well by 'Baekma' leaves. Maximum stem firmness measured during the final harvest was greater in OS-Ca than in the other calcium agents. Especially, maximum stem firmness was greatest in 0.01% OS-Ca. However, elastic strength and maximum bending stress were greater in 0.001% OS-Ca than in the others. Thus, OS-Ca ranged from 0.005 to 0.05%, which did not show any chemical injury, was finally selected as the first candidate for hardening the stem of 'Baekma'. The next experiment using OS-Ca was conducted with the concentrations of 0, 0.005, 0.01, and 0.05%, respectively. From the results, 0.05% OS-Ca showed better plant growth and parameters such as plant height, stem diameter (upper and middle part), the number of leaves, and dry weights of each part than the other concentrations of OS-Ca and control. As for stem firmness depending on OS-Ca concentration, the Ca content within stem, maximum firmness, elastic strength, and maximum bending stress of stem in 'Baekma' sprayed with 0.05% OS-Ca showed the highest values among all the treatments and it turned out to be very high level of significance between control and OS-Ca treatments. However, the area and percentage of the inside cavity within horizontal stem section in 'Baekma' did not show any significance between any treatments including control. Thus, stem firmness of 'Baekma' did not show any correlation with the inside cavity area of stem. In conclusion, we recommend foliar sprays with 0.05% OS-Ca at vegetative growth stage to enhance stem firmness of 'Baekma' during transportation.

• Korean Journal of Plant Resources
• /
• v.16 no.1
• /
• pp.49-54
• /
• 2003

Effects of cutting time and scions section on shooting and plantlets growth characteristics were investigated to increase plantlets products by root cuttings in lacquer tree. Shoot induction from scion section was developed lately as it planted in earlier season. However, shooting rates were over 84% or more in cut planting on 15, 25 March and 5 April than sinee 15 April. Shoots were developed evenly as late cut planting. Generally, plant height, branch number, leaf number, stem diameter, and leaf area per plantlets was excellent in cut planting on 25 March and 5 April. Shooting rate from the root scion varied greatly by root sectionings. The rate of the 10 cm-long-scion was reached 84％, whereas only 54％ in no trimmed root scion after 10 weeks of cutting. Regenerated plantlets from root scion without cut were slightly good in shape, but their height, number of branch per plantlets, and stem diameter were not significant.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.4
• /
• pp.217-221
• /
• 2012

This research was conducted to investigate the influence of various organic substrates on growth and yield of ginseng seedling grown organically in the closed plastic house. The pH and EC of substrates used for organically ginseng cultivation ranged 5.93~6.78 and 0.03~0.15 dS/m respectively. The concentrations $NH_4$-N and $NO_3$-N respectively was 14.01~68.63 mg/L, 5.60~58.83 mg/L. The average quantum of the closed plastic house was range from 10 to 16% of natural light. In July and August, the maximum temperature of the closed plastic house did not exceed 30 and the average temperature was maintained within 25 lower than the field because air conditioning ran. The PPV-1 and PPV-2 bed soil substrates produced higher stem length, stem diameter, shoot fresh weight and leaf area than those of conventional culture. In PPV-2 bed soil substrates, root fresh weight and root diameter was the highest. The root fresh weight of PPV-2 bed soil substrates in closed plastic house was maximum 25% heavier than the conventional cultivation. The results of this experiment will be utilized for making new substrate application for organic ginseng culture in the plastic house.

• Korean Journal of Agricultural Science
• /
• v.42 no.4
• /
• pp.305-311
• /
• 2015

In this research, we surveyed the yield change of garlic cultivation with seed bulbs according to annual field culture after induced meristem culture. From 2007 to 2013, yearly produced seed bulbs from $2^{nd}$ to $8^{th}$ generation were cultivated in the Muan field. Over the generations, the general growth characteristics such as the plant height, leaf number, leaf length and stem diameter were all decreased. When we compared the conventional seed bulbs and TCR ones, the plant height and stem diameter showed bigger difference. And the TCR seed bulbs showed a week late harvest time against the conventional ones. The yield of $2^{nd}$ generation was 72.3 g and 57.1 g for the $8^{th}$ generation. However every generation showed higher yield than conventional seed garlic's ones as 43.9 g. The yield index showed the same trend as $2^{nd}-8^{th}$ to 63% to 21%. After the tissue culture of garlics, the viral infections (OYDV and GSV) of TCR was far less than that of conventional ones. In case of LYSV, the infection ratio was 6.7% at $2^{nd}$ generation and 26% at $8^{th}$. However, the ratio was far less than that (80%) of the conventional ones.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.2
• /
• pp.73-80
• /
• 2003

An experiment was carried out at the Field Laboratory of the Department of Crop Botany, Bangladesh Agricultural University, Mymensingh from March to July, 2001 to investigate the effect of biofertilizers on morpho-physiological characters of okra. The experiment was laid out in a randomized complete block design with four replications. There were nine treatments such as $\textrm{T}_0$ (control), $\textrm{T}_1$ (Azotobacter biofertilizer), $\textrm{T}_2$ (Azospirillum biofertilizer), $\textrm{T}_3$ (Azotobacter+Azospirillum biofertilizers), $\textrm{T}_4$ (Azotobacter+Cowdung 5 ton $\textrm{ha}^{-1}$), $\textrm{T}_5$ (Azospirillum+Cowdung 5 ton $\textrm{ha}^{-1}$), $\textrm{T}_6$(Azotobacter+Azospirillum+Cowdung 5 ton $\textrm{ha}^{-1}$), $\textrm{T}_7$ (Cowdung 5 ton $\textrm{ha}^{-1}$) and $\textrm{T}_8$ (60% Nitrogen). The experimental results revealed that significant variations exist among the treatments regarding morphological characters e.g. plant height, number of leaves/plant, stem base diameter, tap root length, and physiological characters like, root dry weight, leaf area index and crop growth rate. Number of leaves/plant, stem base diameter, root length, root dry weight, leaf area index and crop growth rate were found higher in $\textrm{T}_4$, $\textrm{T}_5$, $\textrm{T}_6$ and $\textrm{T}_8$ than the others. In all the parameters, $\textrm{T}_8$ gave the similar result with biofertilizers in combination with cowdung treatments and $\textrm{T}_7$ showed identical with $\textrm{T}_0$ (control). Biofertilizer treatments had insignificant effect on 1000-seed weight(g). Experimental results mentioned above revealed that morpho-physioligical characters of okra could be modified by the application of biofertilizer+cowdung. However, biofertilizers+Cowdung treatments were comparable to $\textrm{T}_8$(60% Nitrogen) in this study. This suggests that $\textrm{T}_4$ or $\textrm{T}_6$ or $\textrm{T}_5$ were more benificial in environmentally friendly okra cultivation and may be used as an alternative of inorganic nitrogen by saving cost of production and sustaining productivity.