• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.57-64
• /
• 2020

첨단 운전자 보조시스템(ADAS, Advanced Driver Assist System)의 주요 기술에는 적응형 순항 제어(ACC, Advanced Cruise Control), 주행 조향보조 시스템(LKAS, Lane Keeping Assist System), 자동 긴급제동 시스템(AEB, Autonomous Emergency Braking) 등이 있다. ADAS 중 LKAS는 카메라(camera)와 적외선 센서(sensor)를 사용하여 운전자가 의도하지 않은 차선이탈이 발생하였을 때, 조향 보조장치를 제어하여 주행 차선으로 복귀하는 시스템이다. 이러한 시스템의 안전성 평가와 검증을 위해 실차시험을 진행한다. 그러나 LKAS 동작 후 임의의 추가 조향각이 인가될 경우에 대한 연구는 미흡하다. 본 논문에서는 선행연구에서 제안한 시나리오에 대해 Prescan을 이용하여 추가 조향각 인가 모델링(modeling)기법을 개발하고 시뮬레이션(simulation) 하고, 실차시험을 통해 취득한 데이터(data)와의 비교분석으로 모델링 기법의 타당성을 검증하였다. 앞바퀴부터 차선까지 최대 거리오차는 0.56 m이며, 시뮬레이션과 실차시험의 차선 복귀 속도의 차이로 인해 발생하였다. 시뮬레이션과 달리 실차시험은 주행 차선으로 복귀 속도가 느려 이탈하는 차의 횡방향 변화가 상대적으로 적어 시뮬레이션과 오차가 발생한 것으로 판단된다. 시뮬레이션과 실차시험 값의 비교분석 결과 차선복귀 속도 차이는 있지만 앞바퀴부터 차선까지 거리가 약 0.5m로 수렴하는 경향성을 나타내어 신뢰성을 확인할 수 있었다.

• 소성∙가공
• /
• 제21권7호
• /
• pp.397-402
• /
• 2012

The flange hub is a main component in an automotive steering system. In general, the flange hub are fabricated by mechanical machining, which is a process where material waste is inevitable. It is well-known that a net-shape cold forging cannot only reduce material waste but can also improve the mechanical strength of the final product. Thus, a forging process design was conducted for production of a flange hub. Significant spring-back occurs around the flange due to its small thickness in conjunction with the residual stresses after forging. In order to achieve the required dimensional accuracy, a process design with appropriate spring-back control is needed. In this study, a modification of the forging die was designed based on FE analysis with the purpose of spring-back compensation. Four kinds of different die designs were evaluated and the optimum design has two times less spring-back than the initial design. The compensation angle of the optimum design is 0.5 degrees. The results have been experimentally confirmed by cold forging of a flange hub and comparing the amount of spring-back between the actual component and the FE analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.859-864
• /
• 2003

This paper presents a design for the novel suspension mechanism of a two-wheeled mobile robot having two casters which is used for indoor environment. Although the indoor environment is less rough than the outdoor one, the fixed caster mechanism has some problems such as causing the robot to be immovable because robot's driving wheels do not have contact with the ground. Therefore, we tried installing a spring-damper suspension mechanism to keep driving capability and to remove pitching phenomenon. However, this suspension mechanism also has the problem, which the robot body inclined by disturbances does not return to the initial position. To deal with above problems and to accomplish desired performances, we designed the Multilayered Suspension Mechanism, which has springs and dampers working partially according to the inclined angle and angular velocity of robot body concerned with pitching. To analyze design, the equations of motion describing their dynamics were developed. Using the equations, simulation results show the improved performance. We confirm the usefulness of the Multilayered Suspension Mechanism by construction and test of a actual prototype.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1915-1923
• /
• 2011

For automated guidance control of a magnetically guided-all wheel steered vehicle, it is necessary to have information about position and orientation of the vehicle, and deviations from the reference path in real time. The magnet reference system considered here consists of three magnetic sensors mounted on the vehicle and magnetic markers, which are non-equidistantly buried in the road. This paper presents an observer to estimate such position and orientation at the center of gravity of the vehicle. This algorithm is based on the simple kinematic model of vehicle and uses the data of wheel velocity, steering angle, and the discrete measurements of marker positions. Since this algorithm requires the exact values of initial states, we have also proposed an algorithm of determining the initial position and orientation from the 16 successive magnet pole data, which are given by the magnetic measurement system(MMS). The proposed algorithm is capable of continuing to estimate for the case that the magnetic sensor fail to measure up to three successive magnets. It is shown through experimental data that the proposed algorithm works well within permissible error range.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.317-325
• /
• 2017

The EDR(Event Data Recorder) is a part of the ACU(Airbag Control Unit) functions mounted on a vehicle. EDR data have pre-crash data and post-crash data. Pre-crash data are recorded within 5 sec from time zero(AE) with 0.5 sec resolution, and reveal vehicle speed, engine rotation speed, throttle opening, brake pedal operation, acceleration pedal position and steering angle, etc. Using this EDR data, the investigation of a traffic accident can become more objective and scientific. Crash tests of three vehicles equipped with EDR function had been performed successfully. Evaluation of EDR data reliability had also been performed using Vbox and PC-Crash's sequence table function. Based on the results, we could confirm EDR data's reliability and availability for Traffic Accident Analysis by the series of this process.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.84-89
• /
• 2001

The alignment of the rollers carrying the web is found to be one of important factors to the lateral behavior of the moving web and to the quality of the final web products. But, the perfect alignment of the rollers is not always possible and the web itself can be cambered. Thus the control of lateral behavior of the moving web is critical in the most of web handling systems. The web guiding system that adjusts the angle of the alignment between two adjacent rollers is commonly used in industry. But, in this paper a new web guiding system is proposed by using the lateral dynamics of the moving web induced by a tilted roller in normal direction of a web. The computer simulation study was carried out to verify the steering performance of the suggested guiding system. Computer simulation study shows that the performance of the new guiding mechanism is better than that of an existing guiding mechanism.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1930-1935
• /
• 2009

This paper deals with the torque ripple reduction of permanent magnet synchronous motor using harmonic current injection. Torque ripple of electric motor reduces system stability and performances, therefore efforts to reduce torque ripple are exerted in the design process. Torque ripple can be reduced by appropriate pole/slot combination, skew of rotor or stator, design of magnetic circuit, etc. In addition, torque ripple can be also reduced by input voltage and current, and many researches have been conducted to reduce torque ripple for six-step drive. Torque ripple reduction for current vector controlled permanent magnet synchronous motor also have been conducted and verified by investigating back emf wave form. Torque ripple reduction in this paper started from getting torque profile according to input current and electrical angle calculated by FEA, then instantaneous currents at each electrical angles for constant torque are calculated and applied to experiments. Therefore, 0% of torque ripple can be obtained theoretically with harmonic current injection. In order to maximize the effect of torque ripple reduction, a BLDC motor having high harmonic component of back emf is chosen. With sinusoidal current drive, over 100% of torque ripple is obtained initially, then 0.5 % of torque ripple is obtained by FEA using harmonic current injection. The effect is verified by experiment and the presented method can be effectively applicable to Electric Power Steering(EPS).

• 자동차안전학회지
• /
• 제14권3호
• /
• pp.35-40
• /
• 2022

In this study, the driving performances of elderly who's age is over 65 were evaluated. The driving simulation was conducted using a compact driving simulation (CDS) and the simulation scenarios were developed from actual roads by replicating geometry of skewed intersection and traffic control devices located in Jungnang-gu, Seoul, Korea. 27 elderly drivers and 10 non-elderly drivers were recruited and participated on the virtual turning right and going straight driving experiment of CDS. Virtual driving data of driving time, speed, distance, acceleration and deceleration speeds, brake power, and steering wheel rotation angle were recorded and analyzed. Generally, elderly driver took more times to pass through the skewed intersection road and showed lower approaching speed as much as 40% and 25% in case of turning right and going straight scenarios respectively. The speed deviation at skewed intersection road between elderly and non-elderly driver is expected to cause frequent lane changes and overtaking.

• 전자공학회논문지SC
• /
• 제38권6호
• /
• pp.1-8
• /
• 2001

최근에 Ryu 등은 추정된 신호부공간(signal subspace)으로부터 구한 방위각 이노베이션을 이용하여 다중표적의 방위각을 추적하는 알고리즘을 제안하였다. 이 알고리즘은 데이터를 연관시키면서 동시에 표적의 방위각을 구하기 때문에 기존의 추적 알고리즘과 달리 별도의 데이터연관 기법이 필요 없으며, 구조가 간단하다는 장점을 가지고 있다. 그러나 표적의 개수가 N일 때, 각 표적의 방위각 이노베이션을 구하기 위하여 차원이 (2N+1)${\times}$(2N+1)인 실행렬의 역행렬을 구하는 것이 필요하다. 본 논문에서는 표적의 조향벡터를 신호부공간에 투영할 때, 투영오차가 0이 된다는 사실로부터 방위각 이노베이션을 구하기 위한 새로운 선형 방정식을 제안하였다. 제안한 새로운 선형방정식은 Ryu의 알고리즘에서 사용하는 식과는 달리 한 개의 방위각 이노베이션만을 변수로 사용하기 때문에 역행렬을 구할 필요가 없고 효율적이다.

• 융합신호처리학회논문지
• /
• 제24권4호
• /
• pp.192-198
• /
• 2023

본 논문은 자율주행 로봇이 효과적으로 장애물을 회피하기 위한 알고리즘을 제안하였다. 장애물을 인식하기 위해 적외선센서와 카메라를 활용하였다. 적외선센서는 장애물까지의 거리를 측정하고, 카메라로 촬영한 영상을 통해 장애물의 폭을 파악하였다. 장애물 폭을 계산하기 위해 이진화 처리, 윤곽선 검출 및 최소면적 직사각형 기법을 사용하였다. 장애물까지 거리와 장애물 폭을 이용하여 회피 각도를 계산하고, 이 회피 각도는 조향 제어에 적용하였다. 제안한 장애물 회피 알고리즘을 자율주행 로봇에 탑재하여 실험을 수행하였고, 적외선센서만을 사용한 경우에 비해 장애물 폭이 30cm일 때 회피 시간을 최대 8.5초 단축하였다.