• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.461-465
• /
• 2006

This paper presents a useful and simple method to design the passive skimming system for homogeneous permanent magnets based on numerical optimization. To simulate the effects of manufacturing and assembling tolerances, the actual geometrical parameter of the magnet with a derivation is suggested. Then, the optimal design model oi a passive shim system is set up to correct the derivative of field homogeneity. The numbers, sizes and locations of the passive shims are optimized by the steepest descent algorithm combined with design sensitivity analysis. Two implementations show that the proposed method can achieve the required homogeneity of the field with the minimum quantity of ferromagnetics.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.705-707
• /
• 1997

An optimal tuning algorithm of scaling factors is presented in this paper to automatically improve the performance of fuzzy controller. Especially, fuzzy controller has determined an moderate Scaling factor through trial and error. The presented method estimates automatically the optimal values of I/O scaling factors, using modified steepest descent method and this optimal tuning is for nonlinear input/output scaling factors. Simulation results verify the validity of the presented method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.4
• /
• pp.161-167
• /
• 2012

Energy conversion systems such as power inverters and converters are basically significant in establishing photovoltaic power systems to enhance power effectiveness. This paper proposes a new converter control method by using the Lyapunov redesign approach. We construct the proposed control mechanism linearly composed of nominal control and auxiliary control laws. The former is generally designed through a well-known power electronic technology and the latter is implemented to compensate real-time control error due to uncertain natures of converter systems in practice. For realizing adaptive control capability in the proposed control mechanism, a control parameter vector is estimated by utilizing a steepest descent based optimization method. We carry out numerical simulation with Matlab(c) software to demonstrate reliability of the proposed converter control system and conduct a comparative study to prove its superiority by comparing with a generic converter control methodology.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.576-577
• /
• 2007

본 논문은 전력시스템 수용가를 구성하는 비선형 부하에 흐르는 왜곡된 파형을 가진 전류의 상대적 비율을 결정하여 비선형 전기부하구성을 예측하기 위한 연구이다. 본 논문에서는 수용가 전기부하 구성 예측을 위한 해결 절차로써 수용가의 수리적 모델링을 통한 시스템 방정식을 도출하였고 최적화 이론을 적용하였다. 또한, 본 시스템에 적용한 최적화 알고리즘으로 steepest descent, conjugate gradient, Broydon-Fletcher-Goldfarb-Shanno (BFGS) 기법을 사용하였고, 예측된 결과들의 성능을 나타내는 지표인 수렴 속도와 정확도 비교를 통하여 분산 전력시스템의 전기부하구성 예측을 위해 BFGS 기법을 적용하는 것이 가장 효율적인 방안임을 보였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.721-723
• /
• 2004

A trust-region method is a quite attractive optimization technique. It is, in general, faster than the steepest descent method and is free of a learning rate unlike the gradient-based methods. In addition to its convergence property (between linear and quadratic convergence), ifs stability is always guaranteed, in contrast to the Newton's method. In this paper, we present an efficient implementation of the maximum likelihood independent component analysis (ICA) using the trust-region method, which leads to trust-region-based ICA (TR-ICA) algorithms. The useful behavior of our TR-ICA algorithms is confimed through numerical experimental results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.915-923
• /
• 2008

This paper focuses on optimal tuning of nonlinear parameters of a dual-input power system stabilizer(dual-input PSS), which can improve the system damping performance immediately following a large disturbance. Until recently, various PSS models have developed to bring stability and reliability to power systems, and some of these models are used in industry applications. However, due to non-smooth nonlinearities from the interaction between linear parameters(gains and time constants of linear controllers) and nonlinear parameters(saturation output limits), the output limit parameters cannot be determined by the conventional tuning methods based on linear analysis. Only ad hoc tuning procedures('trial and error' approach) have been used. Therefore, the steepest descent method is applied to implement the optimal tuning of the nonlinear parameters of the dual-input PSS. The gradient required in this optimization technique can be computed from trajectory sensitivities in hybrid system modeling with the differential-algebraic-impulsive-switched(DAIS) structure. The optimal output limits of the dual-input PSS are evaluated by time-domain simulation in both a single machine infinite bus(SMIB) system and a multi-machine power system in comparison with those of a single-input PSS.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.169-174
• /
• 2005

In this paper, we proposed a new algorithm of the inverse scattering for the reconstruction of unknown dielectric scatterers using the finite-difference time-domain method and the design sensitivity analysis. We introduced the design sensitivity analysis based on the gradient for the fast convergence of the reconstruction. By introducing the adjoint variable method for the efficient calculation, we derived the adjoint variable equation. As an optimal algorithm we used the steepest descent method and reconstructed the dielectric targets using the iterative estimation. To verify our algorithm we will show the numerical examples for the two-dimensional $TM^2$ cases.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2487-2495
• /
• 2000

The acoustic characteristics of expansion chamber will be changed with the variation of inlet/outlet location due to the higher order acoustic mode in a high frequency in which the plane wave theory is not available. In this paper, the acoustic performance of reactive type expansion chamber with circular cross-section is analyzed by using the modified mode matching theory. The sensitivity analysis of four-pole parameters with respect to the location of inlet and outlet is also suggested to increase the acoustic performance. The acoustic power transmission coefficient is used as cost function, and the location of inlet and outlet is used as design variables. The steepest descent method and SUMT algorithm are used for optimization technique. Several results showed that the expansion chamber with optimally located inlet/outlet had better acoustic performance than concentric expansion chamber.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.6
• /
• pp.648-653
• /
• 2010

The non-metric multidimensional scaling (nMDS) is a method for analyzing the relation among objects by mapping them onto the Euclidean space. The nMDS is useful when it is difficult to use the concept of distance between pairs of objects due to non-metric dissimilarities between objects. The nMDS can be regarded as an optimization problem in which there are many local optima. Since the conventional nMDS algorithm utilizes the steepest descent method, it has a drawback in that the method can hardly find a better solution once it falls into a local optimum. To remedy this problem, in this paper, we applied the simulated annealing to the nMDS and proposed a new optimization algorithm which could search for a global optimum more effectively. We examined the algorithm using benchmarking problems and found that improvement rate of the proposed algorithm against the conventional algorithm ranged from 0.7% to 3.2%. In addition, the statistical hypothesis test also showed that the proposed algorithm outperformed the conventional one.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.158-164
• /
• 2006

In this paper, we proposed a new algorithm of the inverse scattering for the reconstruction of unknown dielectric scatterers using the finite-difference time-domain method and the design sensitivity analysis. We introduced the design sensitivity analysis based on the gradient information for the fast convergence of the reconstruction. By introducing the adjoint variable method for the efficient calculation, we derived the adjoint variable equation. As an optimal algorithm, we used the steepest descent method and reconstructed the dielectric targets using the iterative estimation. To verify our algorithm, we will show the numerical examples for the two-dimensional $TM^2$ cases.