• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.91-93
• /
• 2009

A large steel ingot needs to be larger and larger in size and an ultra high clean, no defect in quality with a low hot top ratio for the resent heavy industry. The demands are very difficult to achieve simultaneously because of their contradictive effect to each other in results. In this study, 30ton steel ingot was cast in a foundry with an optimized design parameter of cast mold and cast process conditions for the low hot top ratio, 12%. The cast ingot was analyzed in macro defect, segregations, and cleanness. No macro defect was founded in central surface of the ingot. The degree of segregation and cleanness are in the controlled range with a sound quality.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.52-56
• /
• 2008

Inclusions in forged large steel ingots of plan carbon steel and tool steel are investigated using optical microscop observation and WDX analysis. The large nonmetallic inclusions which is over $30\sim300{\mu}m$ in their diameter were observed in the samples that has been no good on a nondestructive test. The most of the inclusions were consist of some kind of oxides, ${Al_2}{O_3}$, $SiO_2$, CaO, MgO in forms of particles and glassy with an iron particles. The experimental large steel ingot was cast with a pouring temperature which is about ten centigrade higher than the field standard. The inclusions were observed in the test ingot are the smaller than that was in a usual forged steel ingot and is spherical shape with a glassy agglomerated ${Al_2}{O_3}-SiO_2-CaO-MgO$ particle. The pouring temperature is affected on removing the nonmetallic inclusions during the solidification by a floating mechanism.

• 한국주조공학회지
• /
• 제10권6호
• /
• pp.520-527
• /
• 1990

In order to reduce segregation in 12%Cr steel ingots of 60-100tons, numerical analysis by computer was applied to simulate solidification profiles and the profiles of liguid-solid coexisting zone in accordance with the ratios of H(Height) /D(diameter) of 100-ton ingot. The result is that the ratio of L(vertical length) /D(diameter) of liquid-solid coexisting zone was reduced in proportion to the decrease of H/D ratio. With the reduced H/D ratio(0.92) of ingot, the segregation in 60-ton ingot of 12% Cr steel can be much reduced and recovery was also improved by reducing ingot weight.

• 소성∙가공
• /
• 제21권7호
• /
• pp.412-419
• /
• 2012

The ingot-breakdown scheme of a tower flange material (low-alloy steel) for offshore wind turbine was investigated using finite element (FE) simulations and experimental analyses. Based on compression test results of the low-alloy steel, a deformation processing map was generated using the superposition approach between the dynamic materials model (DMM) and Ziegler's instability criterion. The deformation processing map allowed determination of the optimum process conditions for the tower flange material. Within the FE simulations of the ingot breakdown process, the Cockcroft-Latham criterion, which considers ductile fracture, was used to predict the possibility of forming defects during the hot working process. In general, the critical value for the ductile fracture of steel is 0.74. During the ingot-breakdown under optimum process conditions, the actual tower flange forgings exhibited a relatively uniform shape without any forming defects.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.43-45
• /
• 2008

According to industrial development, Ingots are more large and various. In particular large STS ingot. The probability of shrinkage cavity occurrence is higher than carbon steel and alloy steel. To manufacture ultra clean steel the technical development is nearly necessary for example controlling inclusions and total [H]. In this study, after measured the mold temperature and adjusted thermo conductivity of STS steel and compared existing mold to new one with CAE. As a result, the new mold more reduced than existing mold for the probability of shrinkage cavity occurrence.

• 한국주조공학회지
• /
• 제42권1호
• /
• pp.3-11
• /
• 2022

본 연구에서는 전산모사를 활용하여 오스테나이트계 내열강인 HR3C 합금의 수축 결함 파라미터를 확보하고, 건전부 85% 이상의 잉곳 몰드 설계 및 제작을 진행하였다. 잉곳 몰드 설계 단계에서 전산모사를 활용하여 최적의 잉곳 몰드를 설계 및 제작하였으며, 제작한 잉곳 몰드를 통해 시험조업을 수행하였다. 시험조업 후, 절단 및 비파괴 검사를 통해 결함 양상을 분석하여 수축 결함 파라미터와 잉곳 몰드 설계를 검증하였다. 검증 결과를 기반으로 HR3C 합금의 수축 결함 파라미터 (Niyama 인자, 급탕효율인자, 열간 균열 인자 등)를 확보하였으며, 확보한 파라미터를 통해 건전부 85% 이상의 잉곳 몰드 설계 방안을 확보하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.94-97
• /
• 2009

Cast defect in large steel ingots are estimated in quality and compared each other cast conditions on simulation results by now. The cast defects, micro-crack, shrinkage, pin hole which are predictable in simulation with a reasonable accuracy. In this study, 15 ton steel ingot casting was simulated for solidification model and cast defect prediction. And the real cast was carried out in a foundry for the compeer to the simulation results, the cast defect prediction. Also, the quantity of predicted defect was tried to measuring with the defect mach counting for the various simulated cast conditions. The defect quantity work was used to find the optimized cast condition in DOE(design of experiment) procedure.

• 보존과학회지
• /
• 제28권4호
• /
• pp.367-376
• /
• 2012

철기 생산 기술은 당시 사회 발전을 가늠하는 척도로서 과거의 제철 방법을 이해하기 위한 철기 유물의 미세조직과 개재물에 대한 다양한 연구가 진행되고 있다. 본 연구에서는 고려시대로 추정되는 고양 벽제 제철 유구에서 일괄로 수습된 철제 유물의 시편을 채취하여 광학현미경과 미세경도시험기, SEM-EDS를 이용하여 미세 조직의 성분분석을 통해 제철과 제련 기술을 추론하여 보았다. 연구결과 철괴는 주철괴와 탄소강 철괴로 분류되었다. 주철괴의 경우 백주철 조직과 인(P)의 함량이 높은 회주철 조직으로 분류되었으며 회주철 내 높은 P의 함량은 석회질 등의 융제가 첨가되며 혼입된 것으로 판단된다. 따라서 주철 조직의 철괴 및 고탄소강 철괴는 제련공정을 거치지 않은 선철들로 추정된다. 또한 철기 제작에는 크게 두가지 방법이 사용된 것으로 판단된다. 첫번째는 주물에 주철을 부어 제작하는 주철괴 제작 방법이며, 두번째는 선철의 제련 공정을 통하여 생산되는 탄소강을 제작하는 방법이다. 특히 탄소강의 고른 강 조직과 적은 양의 MnS 개재물은 현대 제철 조직과 매우 유사한 특징을 지니나 고양 벽제 제철유구에서 수습된 탄소강 내 Mn의 함유에 대하여 판단하기에는 좀 더 많은 연구가 이루어져야 할 것이며, 주철의 제강공정을 통한 고탄소강의 생산 가능성도 염두에 두어야 할 것으로 사료된다.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.13-22
• /
• 2012

Forged and flat-bar rolled STD11 tool steel shows anisotropic dimensional change during heat treatment. The dimensional change in the rolling direction is larger than that in the transverse direction. The cause of the anisotropic dimensional change is that the steel is anisotropic in composition, microstructure and other properties. The decrease of anisotropic distortion in tool steel is important for making better precision cold working dies. In this study, the effect of ingot weight and hot rolling reduction ratio on the anisotropic dimensional change of STD11 during heat treatment has been studied. Dimensional change was evaluated by simulating a real heat treatment process, including gas quenching and tempering. Experimental results showed that all the rolled flat-bar products had anisotropic distortion to some degree, but the anisotropic distortion was reduced as hot rolling ratio increased. Ingot weight had a little effect on anisotropic distortion. Microstructural observation showed that the anisotropic dimensional change of STD11 tool steel was closely related to the amount, shape and distribution of coarse carbides.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.25-34
• /
• 1995

Large-scale low-alloy steel shafts, used in the manufacture of steam turbine, are produced by ingot making, forging and heat treatemtn processes. The numerical analysis techniques are introduced to analyze and design the working conditions in each process. The solidification of a steel ingot is studied through the finite element method. The open die press forging and quenching process are simulated by viscoplastic and elastic-plastic finite element method, respectively. Thus numerical analysis techniques are very useful tools to study favorable working conditions for better and more desirable product quality.