• Clean Technology
• /
• v.20 no.2
• /
• pp.171-178
• /
• 2014

In this study we have examined the health risk factors and analyzing data of laborers working at the welding operation at large-sized casting process. In order to improve the working environment of workplace, an effective ventilation method was proposed after performing CFD (computational fluid dynamics) modeling and measurement of pollutants. As a result of examining the health risk factors of workers, oxidized steel dust is the main pollution source in the company A, welding fume in the companies B and C, and welding fume and oxidized steel dust in the company D. The fume concentration in the workers' breathing zone was $0.05{\sim}4.37mg/m^3$, and the fume concentration in the indoor air at the welding process was $0.13{\sim}7.54mg/m^3$. From a result of CFD, a local exhaust with an exhaust duct adjacent to welding point was found to be most effective in case of the exhaust process. In case of air supply, we found that a desired location of air supply fan would be at the end of the opening. If a standardizing the ventilation system for tunnel-type semi-enclosed space at a large-sized casting process is introduced in welding work places in the future, it would be more effective to protect the health of welding workers working at the casting industry and shipbuilding industry and improve the work environment.

• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.115-136
• /
• 2020

This study aims to analyze the impact of China's iron ore imports and exports on the tramper freight rate of China. The import volume of iron ore in China, the export volume of steel products in China, and exogenous variables were used as independent variables. The dependent variables were BDI, BCI, C5, C10, C14, BSI, S2, and S3. Correlation analysis and regression analysis were conducted. The correlation analysis showed that China's iron ore imports were not related to the remaining BDI, BCI, BSI, C5, C10, S2, and S3, except for the C14 index. However, there was a positive correlation between the ship's space and international oil prices, and it was not related to China's Purchasing Managers Index (PMI). The export volume of steel products was negatively correlated with BDI, BCI, BSI, C5, C10, C14, S2, S3, and international oil prices, and was not related to iron ore imports, ship space, and China's PMI. In the verification of the hypothesis between China's iron ore imports and exogenous variables, China's PMI was rejected within the hypothesis. However, the hypothesis on international oil prices and ship space was adopted. In the verification of the hypothesis between China's steel export volume and exogenous variables, the hypothesis on BDI and the S3 index was adopted, and the hypothesis on BSI and S2 was rejected. In the analysis results of this study, the ship space and oil prices were adopted in all the hypothesis results. Domestic companies participating in the tramper shipping market will need to be prepared through continuous monitoring of related indicators.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.259-267
• /
• 2008

This research will examine the probabilities of future global resource crisis and what significance and effect will come upon our economy through the rise of the cost of resources. From now on, the lack of the supply of global resources will dull the world economic growth. Not only that, but the direction of each country's economic development will be decided by the appropriate measure to the resource crisis. If we are to sustain this inefficient industrial structure, as a country with high dependancy on foreign resources, Korea might face macroeconomic shock and the loss of industrial competitiveness. Therefore, we must increase the efficiency of the resource usage in the manufacturing industry such as the chemical and steel industry, and now is a period when we must add high value to our products. Henceforth, the structural constraints of supply will be the root cause of resource crisis. Thus, we must lead the subject of the economic agencies, such as companies and consumers, so that they will be able to adapt to a new paradigm called the fundamental lack of resources, rather than temporal crisis management. The Korean economy must adjust the environment for industry transformation to be achieved.

• Journal of Fashion Business
• /
• v.16 no.5
• /
• pp.207-219
• /
• 2012

It is intended to study the colors of work environment and the working clothes colors between humans and environment with application of the arrangement of working clothes colors to domestic machinery companies that play pivotal roles in the industry of Korea. The purpose of this study is to provide the foundation of color plan for the integrated environmental harmonization and the safety of industrial sites by analyzing the photographs of working clothes in the sires in consideration of the functions of colors (clearness, attention-getting, and safety) using the Faber Birren's Color Harmony and by analyzing the result of a questionnaire survey. The study was conducted by the method to shoot a worksite using a digital camera after wearing 24 sets of uniforms, which were developed by the color plan established in a previous study, in the same worksite. The shooting place was an outdoor steel sheet inspection site of D company, a machinery company in Changwon-si, Gyeongnam, and the intensity of illumination was 2400lux. 24 pieces of images were printed in 5x7 inch size and a questionnaire survey was performed at 5-point scale. The questionnaire survey was performed for 13 subjects consisting of 6 field professionals having more than 30 years of experiences, 4 clothes color professionals, and 3 industrial engineering professionals. The result of the survey was statistically analyzed by the method of frequency analysis using IBM SPSS Statistics 20 Program. As the result of assessment of basic four colors (yellow green, sky blue, blue, and violet) of working clothes, yellow green, sky blue, and blue showed high mean values in (Tint)+(Shade)+(Tone)+(Gray) equation indicating that its is a harmonized equation.

• Korean Journal of Occupational Health Nursing
• /
• v.14 no.2
• /
• pp.118-128
• /
• 2005

A cross-sectional study was conducted to examine the prevalence and related factors of musuculoskeletal symptoms in automobile manufacturing, steel processing, electric assembly line, and wood processing industries. A study subjects were 3,434 workers from small and medium scale companies of Incheon. Walk-through surveys were performed from Feb. of 2004 to Oct. of 2004 to investigate various physical work factors. Symptom prevalence rate by related factors was that women worker showed higher rate than man, and married person was higher than single person. For the working year, group of person who were working less than 3 year showed the highest rate. However, the group of person who were working more than 10 hour per day showed the highest rate. For the total subjects, prevalence of symptoms by body area was as follows: shoulder symptoms were the most frequently reported symptoms(253 person, 7.0%), followed by back(155 person, 4.5%), hand or fingers (136 person, 4.0%), lower extremities(131 person, 3.9%), neck(108 person, 3.1%), and elbow symptoms(97 person, 2.8%).

• Journal of Korean Neurosurgical Society
• /
• v.37 no.3
• /
• pp.217-222
• /
• 2005

Objective: To achieve optimal fit of implant, it is necessary to bend the implant during spine surgery. Bending procedure may decrease stiffness of plate especially made of titanium and stainless steel. Typically titanium suffers adverse effects including early crack propagation when it is bent. We investigate whether 6 degree bending of titanium plates would decrease the stiffness after full cyclic loading by comparing with non-bending titanium plates group. Methods: Authors experimented 40 titanium alloy plates of 57mm in length, manufactured by 5 different companies. Total 40 plates were divided into two groups (20 bent plates for experimental group and 20 non-bent plates for control group). Twenty plates of experimental group were bent to 6 degree with 3-point bending technique and verified with image analyzer. Using the electron microscope, we sought for a initial crack before and after 3-point bending. Mechanical testing by means of 6000 cyclic axial-compression loading of 35N in compression with moment arm of 35mm-1.1 Nm was conducted on each plate and followed by the electron microscopic examination to detect crack or fissure on plates. Results: The stiffness was decreased after 6000 cyclic loading, but there was no statistically significant difference in stiffness between experimental and control group. There was no evidence of change in grain structure on the electron microscopic magnification. Conclusion: The titanium cervical plates can be bent to 6 degree without any crack or weakness of plate. We also assume that minimal bending may increase the resistance to fatigue fracture in cervical flexion-extension movement.

• The Journal of Information Systems
• /
• v.25 no.3
• /
• pp.175-196
• /
• 2016

Purpose The development of new products in automobile parts industry plays an important role. Nowadays, automobile industry is one of the most important industries in the world, because automobile industry includes the industries of steel, machinery, electronic, etc. As a result, automobile industry embodies a country's level of development and competitiveness. The purpose of this study is to analyze the relationship between team characteristics such as communication, familiarity, and contiguity, and team performance through TMS in the process of new products development in automobile parts industry. Design/Methodology/Approach Based on real phenomenon of Korean automobile parts industry, this study tried to figure out the influence of TMS between team members for new product development on team performance. Thus, this study adopts communication, familiarity and contiguity as antecedents, and TMS with specialty, credibility and coordination as a mediating variable, and adopts team performance as a dependent variable. The data of questionnaire were collected from team managers who belong to new product development team in automobile parts firms. 171 questionnaires as data unit of group level from 80 Korean automobile parts firms were collected using face-to-face interview methods. Findings This study proved empirically that the relationship between antecedents and TMS has a positive influence, and TMS also has a positive influence on team performance. This study provides the managers an insight that automobile parts companies should pay more attention to set up TMS in order to improve higher performance between their team members for new product development of automobile parts.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.457-461
• /
• 2004

The insufficient management o( the risk of preconstruction phase causes the risk of construction phase so it makes bad effects such as the extension of construction time and raising of cost. Therefore, the management of the risk of preconstruction phase is being considered as an important element of success of project and the competitive power of construction companies. This study Is to suggest solution methods for each progress after examining reasons of the risk for the management of the risk of preconstruction phase 1'he progress is limited as earth work, RC work, steel work and curtain wall work. Through the introduction of Knowledge Management system, work flow is made by specialist of each part. The reasons of the risk of progress are chosen through the analysis of work flow and I suggest detailed solutions such as person in charge, the starting point of progress and the information of requirements according to the grade of importance about elements of the risk

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.245-257
• /
• 2012

Business environment, competition among firms in recent years, diverse and fragmented by the symbol of the consumer has become very complex and intense. Nevertheless, for the best performance of firms differentiated their company strives to have unique core competencies. In this study, reviewing the internal customer support activities and existing research on market orientation and then how it affects the future strategy for the internal customer support activities. Through the results of this study, first, to appear understanding of the effect of education and training to customers in enterprise-wide, strategic plan through competitor analysis, improved communication between departments, etc need to design to be effective in performance of company in a long term when in planning and training for employees such as job training, service training and training for improving service mind. Second, employment stability and internal communications to the employee's customer orientation showed no significant affect. This is considered for employees due to lack of fear or anxiety, so the employer could focus on his role in the current organization willing to participate actively for goals of the organization. Finally external customer orientation in the employee's customer orientation did not affect the analysis results which is appeared to in companies are constantly communicating with employees through the company's position and the difference between the employee's position is necessary to look for ways to narrow down.

• Corrosion Science and Technology
• /
• v.7 no.6
• /
• pp.350-361
• /
• 2008

Canada's oil sands contain one of the largest reserves of oil in the world. According to recent estimates, there are nearly 180 billion barrels of oil in the Canadian oil sands trapped in a complex mixture of sand, water and clay. More than 40 companies have been currently operating or developing oil sands facilities since the first production in 1967. The process of oil sands upgrading is similar with down stream refinery, but the corrosion environment in upgrading refinery is often more severe than in the refinery because of high chlorides, mineral contents, carbonic acid, heavy viscosity and fouling, higher naphthenic acid [$NA-R(CH_{2})nCOOH$], and greater sulfur contents. Naphthenic acid corrosion (NAC) which is one of the most critical corrosion issues in up & downstream refinery plants was observed for the first time in 1920's in refinery distillation processes of Rumania, Azerbaizan (Baku), Venezuela, and California. As a first API report, the 11th annual meeting stated sources and mechanism of NAC in early 1930's. API has been developing the risk base standards, such as API RP580, 571, and Publication 581 which are based on the worst NAC damage in the world since 2000. Nevertheless not only the NAC phenomena and control in Canadian sands oil process are not much widely known but also there are still no engineering guidances for the Canadian sands oil in API standards. This paper will give NAC phenomina and materials selection guidance against NA environment in Canadian oil sands upgrading processes.