• Journal of Pharmaceutical Investigation
• /
• v.29 no.2
• /
• pp.117-126
• /
• 1999

Differential scanning calorimetry(DSC) was used as a screening technique for assessing the compatibility of some drugs with excipients. On the basis of DSC results, interaction of ibuprofen with PVP K40 was found and eutectic formations with PEG 6000 or magnesium stearate were demonstrated. Fenoprofen Ca was found to interact with PEG 6000. Naproxen showed interactions with PEG 6000, PVP K40, PVPP and Mg stearate. Interactions of tiaprofenic acid with PVP K40 or PVPP were found and eutectic formations with PEG 6000 or Mg stearate were observed. Bisoprolol hemifumarate, metoprolol tartrate and penbutolol sulfate were found to interact with lactose.

• Korean Journal of Pharmacognosy
• /
• v.33 no.3 s.130
• /
• pp.200-206
• /
• 2002

The rhizoma of Polygonatum odoratum (Liliaceae) has been used as the treatment of body fluid deficiency, dryness symptoms and hyper glycemia. To study effects on acute renal failure of P. odorati rhizoma, urinary volume, urinary electrolytes and serum factors associated with renal dysfunction were measured in $HgCl_2-induced$ acute renal failure rats. It was revealed that its ether ex. had significant diuretic effects, regulated hypoelectrolytes$(Na^+,\;K^+,\;Cl^-)$ and inhibited the increase of creatinine, BUN in acute renal failure rats. From the ether ex. which was more effective than MeOH ex., three lipophilic compounds were isolated and elucidated hydrocarbon(l), ${\beta}-sitosteryl$ stearate(2), ${\beta}-sitosterol$(3). The ${\beta}-sitosteryl$ stearate(2) were isolated from Polygonatum sp. at first.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.30-34
• /
• 2021

Electrical failures and reliability problems of electronic components by ionic migration between adjacent device terminals have become an issue in automotive electronics. Especially unlike galvanic corrosion, ionic migration is occurred at high temperature and high humidity under applied electric field condition. Until now, although extensive studies of the ionic migrations dealing with PCBs, electrodes, and solders were reported, there is no study on the effect of insulation polymers and metallic fillers for ionic migration. In this research, therefore, ionic migration induced by the types and contents of polymers and metallic fillers, and variety conditions of temperature, humidity, and applied voltage was studied in detail. Ester and amide types of liquid crystal polymer (LCP) and poly (phthalamide) (PPA) were used as base polymers, respectively and compounded with the metallic fillers of Copper iodide (CuI), Zinc stearate (Zn-st), or Calcium stearate (Ca-st) in various compositions. The compounding polymers were fabricated in IPC-B-24 of SIR test coupon according to ISO 9455-17 with Cu electrodes for ionic migration test. While there is no change in LCP-based samples, ionic migration in PPA compounding sample with a high water absorption property was accelerated in the presence of 0.25 wt% or above of CuI at the environmental conditions of 85℃, 85% RH and 48V. The dendritic short-circuit growth of Cu caused by ionic migration between the electrodes on the surface of compounded polymers was systematically observed and analyzed by using optical microscopy and SEM (EDX).

• Korean Journal of Materials Research
• /
• v.5 no.4
• /
• pp.426-432
• /
• 1995

윤활제인 zinc stearate의 첨가량 (0~4wt%)을 변화시켜 U$O_{2}$분말의 겉보기밀도, 성형시의 분말입자간 마찰과 입자/다이벽 마찰간의 상관관계를 조사하였다. 소량의 윤활제 첨가시에는 U$O_{2}$분말입자간 박막의 윤활제 도포층이 형성되어 겉보기밀도가 증가한 반면 다량의 윤활제를 첨가한 경우에는 U$O_{2}$ 분말입자에 두꺼운 윤활제 도포층이 형성되고 미혼합된 윤활제가 존재하여 겉보기밀도는 감소하는 경향을 보였다. 윤활제를 첨가혼합한 상태에서 다이벽 윤활도포 유무에 따라 구한 U$O_{2}$ 성형체의 성형압력/성형밀도 자료로부터 분말입자간 마찰, 입자/다이벽 마찰 그리고 성형시 lubrication/inhibition등의 상대적 중요성을 조사하였다. 입자/다이벽 마찰에 의한 압력손실은 입자간 마찰에 의한 압력손실보다 크게 나타났다. 입자/다이벽 마찰에 의한 압력손실은 다이벽 윤활제 도포에 의해 최소화될 수 있지만 상대적으로 바람직하지 않은 성형시의 inhibition이 야기되는 것으로 나타났다.

• Macromolecular Research
• /
• v.16 no.2
• /
• pp.178-181
• /
• 2008

Polystyrene (PS) nanospheres with a monodisperse size distribution, positive surface charge and high molecular weight were successfully synthesized using various types of metal stearates in an aqueous NaOH medium. The diameter of the PS nanospheres was controlled from 80 to 450 nm by changing the type of metal stearate. It was also found that controlling the NaOH concentration in solution was important for producing monodisperse PS nanoparticles. The nanospheres prepared with zinc stearate possessed a positive surface charge of 60 to 80 mV, confirming that PS particles were functionalized with metal stearates. It is believed that the metal stearates provide PS particles with not only colloidal stability but also a positive surface charge.

• Nuclear Engineering and Technology
• /
• v.34 no.4
• /
• pp.323-330
• /
• 2002

Various types of compounds were tested with the aspects of decomposition and formation of residue in a $CO_2$ or 7H$_2$+93$N_2$ atmosphere. The evaporation temperature range of each compound was determined from thermogravimetric curve. Decomposition of dicarbon amide, stearic acid, acrowax and zinc stearate was studied by thermogravimetry in $CO_2$ or in 7H$_2$+93$N_2$ atmosphere. All compounds were decomposed in $CO_2$ atmosphere at lower than 40$0^{\circ}C$, but the residue, ZnO remained for zinc stearate. ZnO did not decompose in $CO_2$ atmosphere up to 130$0^{\circ}C$, but reduced into Zn metal and disappeared in the temperature range of $600^{\circ}C$ to 120$0^{\circ}C$ in 7H$_2$+93$N_2$ atmosphere. The effect of residue, which trapped in closed pores of sintered pellet, on the thermal stability was studied using the resintering test at 1$700^{\circ}C$ in 7H$_2$+93$N_2$ atmosphere. In the case of oxidative sintered pellet with admixing zinc stearate, the cavity formation accompanied with a density drop after resintering is due to the pressure of the Zn gases trapped in the isolated pores.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.239-244
• /
• 2004

Effect of lubricants on the rheological and thermal properties of poly(butylene terephthalate) [PBT] were investigated. Calcium stearate and adipic acid glycol polyester (AhGP) were used as processing lubricants for PBT. Decrease of melt viscosity was accomplished by the addition of 1 wt％ of lubricants. It was understood that melt viscosity was affected by the enhancement of chain mobility of PBT with AhGP as an internal lubricant as well as the lubricity on processing equipment developed by calcium stearate as an external lubricant. Lubricants also influenced chain scission of PBT which caused the viscosity drop as well. In addition, lubricant is resulted in the lowering of thermal stability, however, this might be minimized by adding less than 3 wt％ of calcium stearate as a lubricant. As a consequence, calcium stearate as an external lubricant is more effective to control the melt viscosity of PBT with minimizing of chain scission and thermal instability in PBT.

• Proceedings of the Korean Fiber Society Conference
• /
• 1992.06b
• /
• pp.72-72
• /
• 1992

• Proceedings of the Korean Fiber Society Conference
• /
• 1992.06a
• /
• pp.19-20
• /
• 1992

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.191-194
• /
• 2002

완전히 가수분해 된 폴리비닐알콜(PVA)는 쉽게 결정화되기 때문에 일부 가수분해된 PVA보다 에멜전 안정화와 계면활성이 약하다$^{1)}$ . 이러한 성질을 개선하려면 폴리비닐알콜분자에 hydrophobic한 알킬기를 도입하는 것이 주요한 방법이다. 폴리비닐알콜 분자에 긴 알킬기를 도입하는 방법에는 chain transfer 반응을 통하여 폴리비닐아세테이트(PVAc)분자의 말단에 긴 알킬기를 도입한 후 가수분해하는 방법$^{1)}$ ; 비닐아세테이트 (VAc)가 긴 알킬리를 가진 비닐 단량체와 copolymerization 한 후 가수분해하는 방법 $^{2),3)}$ ; 합성된 PVA가 긴 알킬리를 긴 알킬리를 가진 acyl chloride와 직접 반응하여 얻는 방법$^{4)}$ 등이 있다. (중략)