• Biomolecules & Therapeutics
• /
• v.19 no.1
• /
• pp.126-133
• /
• 2011

The fruit of Actinidia arguta (AA) has been used mainly for the treatment of skin diseases, diuresis, diabetes mellitus and osteoporosis in Korean traditional medicine. It is known that AA (hardy kiwi) fruit extract has an effect on 2-chloro-1,3,5-trinitrobenzene-induced atopic dermatitis-like skin lesions in NC/Nga mice. Mode of action for it is associated with the modulation of biphasic Th1/Th2 cytokines. Furthermore, DA9102 containing AA is a herbal medicine currently under phase II clinical trial for atopic dermatitis in Korea. However, no active principles of AA on the decrease of Th2 cytokines including IL-4 and IL-10 have been identified. In this study, bioactivity-guided fractionation of an alcohol extract from the dried fruits of AA using ELISA assay for IL-4 production led to the isolation of $\alpha$-linolenic acid (I), linoleic acid (II), ethyl linolenate (III), ethyl linoleate (IV) and ethyl stearate (V) as the major active components. These compounds showed the down-regulatory effects of IL-4 production in A23187-stimulated RBL-2H3 cells without cytotoxicity.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.159-163
• /
• 1999

Model experiments were conducted to investigate the effect of different fillers on the removal of toner ink. Combinations of different papers (commercial photocopy paper and filler-free paper), fillers (calcium carbonate, kaolin clay, and talc), and chemicals(1-octadecanol, stearic acid, oleic acid, and TOFA) and stearic acid were found to be effective in detachment and agglomeration of toner ink. Furthermore, pH had little effect on toner detachment and agglomeration, indicating both protonated fatty acids and their anions are equally effective. In the presence of either kaolin clay or talc, all these agglomerating agents are equally effective, although a slightly higher dosage(1% for clay and 2% for talc as compared with control) is required, presumably due to the adsorption of chemical by the filler. Calcium carbonate filler, on the other hand, has a significant and adverse effect on the fatty acids used but has little effect on 1-octadecanol with the exception of possible adsorption. While stearic acid is not effective, a much higher level of oleic acid or TOFA is needed when calcium carbonate fillers are present as compared to the filler-free case. Fatty acids react with calcium carbonate to form calcium salts. The availability of fatty acid anion for toner detachment and agglomeration is determined by the solubility of calcium salt of a given fatty acid. Calcium oleate is 10 times more soluble in water than calcium stearate.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.205-211
• /
• 1995

To increase the solubility of iodine and iodine releasing agents, which are used widely as a topical broad spectrum antiseptics and disinfectant sanitizers, its inclusion complexes were prepared and studied. Inclusion complexes of iodine with ${\beta}-cyclodextrin$ were prepared by coprecipitation method and complex formation was acertained by differential scanning calorimetry and microscopic observation. Iodine content of inclusion complex was determined by means of iodometry. Tablets containing inclusion complex were manufactured with sugar, citric acid, magnesium stearate, dextrose. Stability of inclusion complexes and tablets was evaluated by accelerated stability test, and comparing with PVP-iodine. During preparation, use of 50% ethanol solution is preferable to water as the medium because the former resulted in more stable complex for a month under accelerated storage conditions. Solubility of iodine in KI aqueous solution was 0.048 g/ml and lower than in 50% ethanol solution. Inclusion complex and its tablets were very stable at severe condition for one month, and comparable to PVP-iodine in the aspect of stability. Inclusion complex tabletswere not affected with citric acid, sugar, dextrose, and direct tableting method was recommendable because wet granulation using ethanol gave some release of included iodine during process.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.116-122
• /
• 1998

It is well known that all-trans-retinol is not only very unstable in heat, light, air, and water, but also skin-irritant despite a good anti-wrinkle effect. Therefore, it is very difficult to stabilize retinol and make the safe retinol containing cosmetics by using a certain concentration of retinol with real effect. In order to dissolve these problems and apply retinol for skin care cream, firstly retinol is to be encapsulated in the vesicle called Liposphere (pseudo-liposome) which is made by homogenizing under high pressure the mixtures of lecithin, retinol, caprylic/capric triglyceride, and hydroalcoholic solution ; and then this retinol containing Liposphere is to be intercalated in lamellar liquid crystal layer which is prepared by emulsifying in an optimal ratio the mixtures composed of non-ionic emulsifier (cetearyl glucoside, sorbitan stearate & sucrose cocoate etc), cetearyl alcohol, stearic acid, cholesterol, and ceramide. In addition, the stability of the retinol containing oil in water cream by adding the polymeric emulsifier such as acrylate /C10-30 alkyl alkylate crosspolymer is to be ensured even at 55 C. Retinol containing oil in water cream prepared through above procedure could be very stable at 45 C for at least 50 days. The structure identification of lamellar liquid crystal was determined using polarized light microscope and electron microscope Conclusively, we could make the very stable retinol containing oil in water cream by triple procedure, that is, encapsulation of retinol in Liposphere, intercalation of retinol in lamellar liquid crystal layer, and assurance of the high temperature stability of cream even at 55 C.

• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.61-65
• /
• 1990

Comparison of induction times among the Rancimat Method, the Oven Test and the Weight Method were investigated, and the oxidation stability of perilla oil was determinated by the Rancimat Method. The induction times determinated by three methods using perilla oil show a good correlation. And the temperature dependence of the induction times of perilla oil was as follows. $t_p=e^{-0.0815T+9.183}$. The antioxidant effect of Tocopherols on the oxidation of perilla oil was not observed, and the antioxidant effect of the organic acids was increased in the order of Ascorbic acid>Ascorbyl stearate>Malic acid>Tartaric acid>Citric acid. The synergistic effect of Ascorbic acid (500 ppm)and Tocopherols was not observed below 200ppm of Tocopherols, but became larger with increasing Tocopherols level over 200ppm.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.68-68
• /
• 2003

HP(2-20) (AKKVFKRLEKLEKLFSKIQNDK) derived from the N-terminus of Helicobacter pylori Ribosomal Protein L1 shows potent antimicrobial activity against bacterial, fungi and cancer cells without cytotoxic effect. In order to investigate the relationships between antimicrobial activity and the structures, several analogues have been designed and synthesized. The structures of these peptides in SDS micelles have been investigated using NMR spectroscopy and they revealed that analogue 3 has the longest, well-defined alpha-helix from Val5 to Trp19. NOESY experiments performed on HP and its analogues in nondeuterated SDS micelles show that protons in the indole ring of Trp16 are in close contact with methylene protons of SDS micelles. In order to probe the position of HP and its analogues relative to the SDS micelles, spin-labeled stearate was added. Large effects are observed for the chemical shifts and the intensities of Phe5, Glu9, Phe12, and Trp16 within the helix region by 16-doxylstearate. This result implies that 16-doxylstearate is located in the center of the micelles and the hydrophobic phase of the amphiphilic ${\alpha}$-helix is located in contact with the acyl chains of the micelles. Also, Lys3 and Lys4 at N-terminus and Lys20 at C-terminus may produce an optimal arrangement for electrostatic interactions between the sulfate head groups of the SDS and the positively charged lysyl N$\sub$3/$\^$+/. Interactions between the indole ring of Trp and the membrane, as well as the amphiphilic ${\alpha}$-helical structure of HP induced by Trp at the C-terminus may allow HP to span the lipid bilayer. These structural features are crucial for their potent antibiotic activities.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.144-150
• /
• 2011

The effect of low profile agent and release agent on the surface and mechanical properties of bulk mold compound were investigated. Atomic content and contact angle of surface were characterized using X-ray photoelectron spectroscopy and contact anglemeter. Surface morphology and surface roughness were obtained using field emission scanning electron microscope and atomic force microscope, respectively. As increasing the low profile agent from 0 to 9.2 wt%, the volume shrinkage and surface roughness decreased from 0.35% to 0.05%, and from $0.27{\mu}m$ to $0.12{\mu}m$, respectively. The increase of release agent from 1.8 wt% to 3.6 wt% resulted in the migration of release agent to sample surface and it increased the surface roughness. The flexural strength and impact strength were decreased approximately 30% as the low profile agent increasing from 5.0 wt% to 9.0 wt%.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.377-384
• /
• 1988

Carotenoprotein from Salmo Salar eggs was purified and characterized by CM-cellulose, 50% $(NH_4)_2SO_4$, DEAE-cellulose and sephadex G-75 column. The chromoprotein had a spectrum with ${\lambda}_{max}$ 409, 540 and 580nm in p-buffer (pH 7.0) at initial step. Molecular weights by sephadex G-200 gel filtration were 50, 200 and 26,000 daltons. SDS-PAGE analysis showed a structure with four identical subunits (12,500 daltons). Its sample retained a small amount of carbohydrates and lipids. Amino acids were analyzed, and mannose, galactose and glucosamine also were identified. Carotenoid extacted with acetone was found to be astaxanthin ester by partition test, epoxy test, iodine test, allylic test, reduction, acetylation, uv/vis, ir and nmr datas. Stearate (47.9%) and palmitate (21.4%) were predominant fatty acids in the astaxanthin ester.

• Membrane and Water Treatment
• /
• v.7 no.3
• /
• pp.209-221
• /
• 2016

As a highly hydrophilic fibrillar mineral in nature, attapulgite (ATP) is a promising new additive for preparation of ultrafiltration (UF) hybrid membrane. In this work, ATP particles, which were grafted with a new Gemini surfactant of Ethyl Stearate-di(octadecyl dimethyl ammonium chloride) to detach the crystal bundles to single crystal and enhance the uniform dispersion in an organic polymer matrix, were incorporated into poly(vinylidene fluoride) (PVDF) matrix, and PVDF/Gemini-ATP hybrid membranes for adsorptive removal of Ni(II) ions from aqueous solution were prepared via a phase inversion method. Chemical composition, crystalization and morphology of the modified ATP were characterized by Fourier transform infrared spectroscopy (FTIR), Transmission electron microscope (TEM) and X-ray diffraction (XRD), respectively. The morphology of the hybrid membrane was characterized by Scanning electron microscopy (SEM), the performance of permeability, hydrophilicity and adsorption of Ni(II) ions were studied, and the adsorption kinetics of the PVDF/ATP hybrid membranes were particular concerned. The results showed that the hybrid membrane displayed a good thermal stability and hydrophilicity. Comparing with PVDF membrane, the hybrid membrane possessed good adsorption capacity for Ni(II) ions, and the adsorption kinetics fit well with Lagergren second-order equation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7838-7843
• /
• 2015

In this study, metformin hydrochloride for first choice of type 2 diabetes patient is administered relatively high dose, 1000 to 2000 mg orally once a day, and had very high water solubility, so it make difficult to swallow tablet to requires high amount of sustained release agent. To overcome these challenges, we used novel metformin salts had relatively low water solubility to minimize sustaining excipient for small size of dosage form. six novel metformin salts were synthesized by making metformin free form under reaction with NaOH and adding acid salts. we confirmed metformin stearate had the lowest water solubility and showed half drug release in dissolution study at 12hour. In conclusion, novel metformin salts had low water solubility can be used to reduce the size of sustained metformin tablet for improving patient compliance.