• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.159-161
• /
• 2007

$CO_2$ laser sees that is most suitable to get this effect through minimum formation damage and advantage that is root enemy of effect that happen in minimum cellular tissue depth of 0.1mm is stable living body organization or internal organs institution. Formation damage by ten can be related in formation's kind or energy density, length of evaporation time. If shorten evaporation time, surroundings cellular thermal damage 200 - because happen within 400ums laser beam in rain focus sacred ground surroundings cellular tissue without vitiation me by evaporation Poe of very small floor as is clean steam can. Application is possible to vulva cuticle cousins by a paternal aunt quantity, uterine cancer, cuticle tumor by laser system that $CO_2$ laser gets into standard in obstetrics and gynecology application. Because effect that super pulse output is ten enemies of laser if uniformity one pulse durations are short almost is decreased, most of all pulse module special quality of pulse style $CO_2$ laser for obstetrics and gynecology mode stabilization by weight very, in this research to get into short pulse duration and higher frequency density, do switching by high frequency in DC-DC Converter output DC's ripple high frequency to be changed, high frequency done current ripple amount of condenser for output filter greatly reduce can. Ripple of output approximately to Zero realization applying possible inductor realization through a special quality experiment do.

• 산업기술연구
• /
• 제3권
• /
• pp.87-94
• /
• 1983

Heating characteristics of red pepper paste packed in report pouches of various thicknesses and their storage stability were investigated to determine the adequate processing conditions that good bacteriological safty and minimal quality changes could be obtained, when sterilized by using a steam-air system retort. A heat penetration into pouch-packed red pepper paste was carried out through by a conductive heat transfer, indicating a simple logarithmic heating curve, and the smaller thickness revealed the higher heat penetration rate, suggesting the possibility of high temperature-short time sterilization of red pepper paste. The processing conditions with Fo-value of 4.5 or higher were sufficient for keeping up bacterial safty, but based on C-value, better quality retention was obtained at pouch thickness of 15mm under the processing temperature of $120^{\circ}C$. Subsequent storage study revealed that the red pepper paste packed in 15mm and processed at $120^{\circ}C$ with Fo=4.5 could be held without any spoilage and overall acceptance change, when stored for 6 months at room temperature under the relative humidity of 70%. After 3 months storage in $38^{\circ}C$ under saturation humidity, overall acceptance of red pepper paste were judged not to be maintainable on the acceptable level, but it may be suggested that above the results could be kept up a desirable quality without any remarkable deterioration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.55-57
• /
• 2007

$CO_2$ laser sees that is most suitable to get this effect through minimum formation damage and advantage that is root enemy of effect that happen in minimum cellular tissue depth of 0.1mm is stable living body organization or internal organs institution. Formation damage by ten can be related in formation's kind or energy density, length of evaporation time. If shorten evaporation time, surroundings cellular thermal damage 200 - because happen within 400ums laser beam in rain focus sacred ground surroundings cellular, tissue without vitiation me by evaporation Poe of very small floor as is clean steam can. Application is possible to vulva cuticle cousins by a paternal aunt quantity, uterine cancer, cuticle tumor by laser system that $CO_2$ laser gets into standard in obstetrics and gynecology application. Because effect that super pulse output is ten enemies of laser if uniformity one pulse durations are short almost is decreased, most of all pulse module special quality of pulse style $CO_2$ laser for obstetrics and gynecology mode stabilization by weight very, in this research to get into short pulse duration and higher frequency density, do switching by high frequency in DC-DC Converter output DC's ripple high frequency to be changed, high frequency done current ripple amount of condenser for output filter greatly reduce can. Ripple of output approximately to Zero realization applying possible inductor realization through a special quality experiment do.

• 한국식생활문화학회지
• /
• 제15권3호
• /
• pp.155-162
• /
• 2000

The purpose of this study was to analyse serving size, plate waste, and sensory evaluation on menu of university foodservice. This study was conducted in three restaurant of one university for 14 days, 1995. The serving size of food was measured by weighing machine. The plate waste of food was calculated by the aggregative selective plate waste measurement technique. Questionnaires of sensory evaluation were developed and hand-delivered at three restaurants. Rating criteria of sensory evaluation were appearance, taste, temperature, color, flavor, texture and overall quality. The plate waste of side dish were 35.5%, 42.5%, and 39.2% in A, B, and C restaurants. The plate waste of kimchi were 46.8%, 36.3%, and 55.9% in A, B, and C restaurants. So, university foodservice manager should concern quality of side dish and kimchi. The score of fried food in sensory evaluation was low. So, batch cooking was needed. The score of rice in sensory evaluation of C restaurants was very low. Therefore, steam ice cooker in C restaurants should be changed by gas automatic rice cooker.

• Food Quality and Culture
• /
• 제3권1호
• /
• pp.15-19
• /
• 2009

Gochujang samples with essential oils were evaluated for sensory including taste and, smell during various storage periods with the aim of developing improved high value-added products. The sensory testing was performed on Gochujang with 0.005% Zanthoxylum piperitum and Chrysanthemum indicum essential oils, extracted through steam distillation. During storage at 4 and $20^{\circ}C$ for 8 weeks, sensory testing was performed at 0, 1, 2, 4 and 8 weeks by trained panelists. Overall quality decreased in Gochujang samples containing Z.piperitum essential oil and increased in samples containing C.indicum essential oil, at 4 and $20^{\circ}C$. Samples stored at $4^{\circ}C$ were quality more then those stored at $20^{\circ}C$. Sensory evaluation was highest for Gochujang with C.indicum essential oil stored at $4^{\circ}C$. It is concluded that functional Gochujang can be developed by adding small quantities of essential oils. Increasing the amount of essential oil added is likely to affect the innate taste and flavor of Gochujang.

• 한국식품영양학회지
• /
• 제12권3호
• /
• pp.258-264
• /
• 1999

This study was carried out to investigate the status in weight loss yield of edible meat quality and free amino acid contents of the snow crab(Chionoectes japonicus) by steaming and various drying treat-ment. Change of body weight loss in steaming treatment sample were 20.48∼26.72% and yield of edible meat of steaming sample was higher than raw sample(p<0.05) The pH value was increased with steam-ing and drying and pH of trunk meat was more increased than leg meat. Volatile basic nitrogen(VBN) content of vacuum dried sample was highest and VBN of hot-air and freezing dried sample were about 10mg%. Content of vaccum dried sample wre 41.33 and 48,56mg%. Thirty kind of free amino acids dectected in the snow crab and changes of free amino acid in leg meat were markedly reduced by vacuum drying and the reducing ratio of leg meat by freeze drying was little. The major free amino acid of leg and trunk meat were 39.94% 46.78% respectively. The formation of flavor free amino acid in freezing dried sample were high but its hot-air aried sample were small.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.95-102
• /
• 2009

A steam generator (boiler) in thermal power plants, consisting of more than 30,000 parts and components, can lead to the plant shutdown with damage to even the small part of the components; esp., like weld failures on boiler tubes. Consequently it is greatly demanded to improve the quality of the weld on the boiler tube for the stable operation of the power plants. Because of the feature of the welding, which is done past by melting the work pieces and adding a filler material that cools to become a strong coalescence, there is a great possibility that weld failures take place. As a result, it is regulated to make a non-destructive testing, like radiography test, to detect defects and flaws in the weld. The current film radiography test provides a lower image quality exceeding 2.0% of a basic quality level for a penetrameter, it is very likely to fail to detect micro defect. As a result, the prevention for the boiler tube failure has not been made effectively. In this study, computed radiography technology has been applied as a digital radiography test to the boiler tube weld, and Se-75 radiation source was used to improve the image quality, instead of Ir-192 source. As a result of this study, it is proven to save the time and cost for test and to enhance the quality level of penetrameter penetrating image, which enables to upgrade the quality of radiography test to the boiler tube weld.

• 한국물환경학회지
• /
• 제32권6호
• /
• pp.511-519
• /
• 2016

National Institute of Environmental Research (NIER) has developed the Korean Reach File (KRF) for scientific and systematic analysis of variables related to water quality, pollutant sources and aquatic ecosystems in consideration of steam reach networks. The KRF provides a new framework for data production, storage, management and analysis for water related variables in relation to spatial characteristics, connections, and topologies of stream reaches. However, the current version of KRF (ver.2) has limited applicability because its nodes include not only the stream points based on topological characteristics but also those based on water quality monitoring stations, which may undermine its generality. In this study, a new version of KRF (ver.3) was designed and established to overcome the weak point of version 2. The version 3 is a generalization of the old KRF graphic data and it integrates the attribute data while separating it from the graphic data to minimize additional work that is needed for data association and search. We tested the KRF (ver.3) on actual cases and convenience and adaptability for each application was verified. Further research should focus on developing a database link model and real-world applications that are targeted to process event data.

• 한국식품영양과학회지
• /
• 제34권5호
• /
• pp.674-680
• /
• 2005

국내 단체급식소에 파전의 활용을 높이기 위해 cook-chill 처리한 파전을 개발시켜 이를 1일, 3일, 5일간 $4^{\circ}C$에서 냉장저장시켰다. 이 제품은 후라이 팬, steam/convection oven, 전자렌지를 이용하여 재가열한 후 관능평가를 수행하여 단체급식소에서 적용할 수 있는 재가열 방법을 평가하였으며 이에 대한 결과는 다음과 같다. 재가열 방법에 따른 관능평가 결과에서, 1일 냉장저장 후에는 전자렌지에서 재가열한 파전이 맛, 냄새, 색에서 가장 관능평가 점수가 낮게 나타났고 3일 냉장저장 후에는 steam convection oven과 전자렌지에서 재가열한 파전이 맛, 질감에서 낮은 관능평가 점수를 나타냈다. 5일 냉장저장 후에는 steam convection oven과 전자렌지에서 재가열한 파전이 냄새와 질감에서 즉석에서 조리한 파전보다 유의적 (p<0.05)으로 낮은 관능평가 점수를 보였다 그러나 후라이팬에서 재가열한 파전은 냄새에서만 즉석에서 조리한 파전보다 유의적 (p<0.01)으로 낮은 관능평가 점수를 보여 cook-chill파전은 후라이팬에서 재가열하는 것이 가장 바람직한 것으로 나타났다. 세 가지 재가열 방법에서, 저장기간에 따른 차이에 대한 결과를 살펴보면, 후라이팬에서 재가열한 cook-chill 파전은 즉석에서 조리한 파전보다 맛, 색, 질감에서 저장 3일까지는 유의적인 차이를 보이지 않았으나 저장 5일에서는 맛에서 유의적(p<0.01)으로 낮은 관능평가 점수를 보였다. Steam convection oven에서 재가열한 cook-chill파전은 즉석에서 조리한 파전보다 맛, 냄새에서 저장 1일부터 유의적 (p<0.01)으로 낮은 평가 점수가 나타났으나 색, 질감에서는 저장 5일에서 유의적 (p<0.01)으로 낮은 관능평가 점수를 보였다. 전자렌지에서 재가열한 cook-chill 파전은 즉석에서 조리한 파전보다 저장 1일부터 맛과 냄새에서 유의적(p<0.01)으로 낮은 관능평가 점수를 보였으나 색과 질감에서는 유의적인 차이를 보이지 않았다. 이상을 살펴 볼 때 , cook-chill 파전은 실험한 세가지 재가열 방법에서 냄새에 대한 관능평가 점수가 가장 낮게 나타났으므로 앞으로 파전 특유의 냄새를 개선시킬 수 있는 방법에 대한 연구가 필요하겠다. 또한 단체급식소에서 많이 이용하는 가열방법인 후라이팬을 이용하여 재가열한 파전의 관능평가 점수가 높게 나타나 현재 우리나라 급식소에서는 주로 전 종류 가열시 후라이팬을 사용하고 있으므로 cook-chill 파전을 개발하여 공급하는 경우 급식소에서 쉽게 제공할 수 있을 것이다. 그러나 앞으로 단체급식소에서 steam convection oven을 활용하여 대량으로 재가열하는 방법을 예측할 때 맛과 냄새 등을 개선시키는 조리방법에 대한 지속적인 연구가 필요하겠다. Cook-chill파전의 안전성 평가에서, 파전을 조리한 직후와 5일간 냉장저장 후 총균수, 저온성균수, 대장균군수를 측정하는 미생물학적인 방법과 산가와 과산화물가를 측정하는 화학적 방법에 의해 파전의 안전성을 확인하였다. 냉장 저장하는 5일 동안 실험 결과 총균수는 검출되지 않은것에서부터 시작하여 후라이팬을 이용하여 만든 파전에서 3일간 배양한 후 측정된 것에서 최고 $5.2\times10^2$ CFU/g까지 나타났다. 대장균군과 저온성균은 실시된 모든 실험에서 검출되지 않았다. 산가인 경우 후라이팬에서 조리한 것 이 steam/convection oven에서 조리한 것보다 높게 나왔지만 1.90에서 4.03의 범위로 안전성에는 큰 문제가 없는 것으로 확인되었다. 과산화물가에서는 냉장 저장 중 2.63배까지 증가하였으나 안전성에는 문제가 없는 것으로 확인되었다. 따라서 cook-chill system을 이용한 저장기간 동안 파전의 안전성은 큰 문제가 없는 것으로 확인되었다.

• 패션비즈니스
• /
• 제15권5호
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.