• 제목/요약/키워드: Status Monitoring

검색결과 1,782건 처리시간 0.029초

마을 내 잔존 노거수의 생육현황 및 실태진단 - 경주시 현곡면을 중심으로 - (Diagnosis of the growth status and actual condition of the remaining old trees in the village - Focused on Hyeongok-myeon in Gyeongju-si -)

  • 김영훈;덩베이지아;천겅;유주한
    • 한국환경복원기술학회지
    • /
    • 제23권6호
    • /
    • pp.109-123
    • /
    • 2020
  • The purpose of this study is to provide basic data for the establishment of future countermeasures by diagnosing the growth status and actual condition of undesignated old trees distributed in Hyeongok-myeon, Gyeongju, Gyeongsangbuk-do. The number of old trees surveyed was 2 weeks in Gajeong-ri, 2 weeks in Haguri, 3 weeks in Nae-Tae-ri, 1 week in Nawon-ri, 6 weeks in Oryu-ri, 3 weeks in Sangguri, and 2 weeks in Sohyeon-ri, The trees species composition was 6 trees Celtis sinensis Pers., 1 Diospyros lotus L. trees, 4 trees Salix chaenomeloides Kimura trees, 2 Styphnolobium japonicum L. trees, and 7 Zelkova serrata (Thunb.) Makino trees. Growth status is 7.1~22.0m in height, 14.6~25.1m in long axis, 10.2~19.2m in short axis, root diameter is 76.0~236.4cm, diamter at breast height is 67.0~220.0cm, soil acidity is pH4.9~7.0, soil The hardness was measured to be 4.0-27.0mm. The result grade of the scoring data of health information is represented by monitoring generally, monitoring critically, and absolute monitoring, and it was confirmed that out of the 20 trees population in Hyeongok-myeon, the general monitoring grade was 7 weeks, the major monitoring grade was 13 weeks, and there was no absolute monitoring grade. Accordingly, the number of old trees of the general surveillance level was maintained at the current level, and ecological surgical operations were introduced for the major surveillance level, but the case of village forests should be different, and sequential treatments were the old tree urgently needed. The level and bark of the target tree, the state of the crown, the root exposure, the presence of pests and pests, the vitality and the ground condition, the degree of pollution are normal, poor, or very poor, operation and protection management, soil improvement, removal of cover, and disinfection were urgently needed for the old trees with the surveyed data. In order to compensate for these matters, continuous monitoring and management measures for the old number should be sought.

제품안전을 위한 소비자모니터링 시장감시 성과 및 영향요인 연구 (A Study on the Performance and Impact Factors of Consumer Monitoring Market Surveillance for Product Safety)

  • 서정대
    • 한국안전학회지
    • /
    • 제36권1호
    • /
    • pp.26-35
    • /
    • 2021
  • Governmental bodies generally conduct investigations for product safety management once new products are released to the market, in order to prevent distribution of illegal and defective items. Further, market surveillance activities are regularly conducted by the government to ensure distribution of safe products and recall any hazardous products. The safety investigations often involve a consumer monitoring system wherein consumer organizations participate in market monitoring to conduct surveys on illegal and defective products. As a result, the monitoring results of individual consumer organizations are available separately, but an integrated analysis of the data from all consumer organizations cannot be performed, thereby deterring comprehensive evaluation of the consumer monitoring system. In this study, we analyze the individual monitoring results of consumer organizations to understand the overall status and performance of comprehensive market monitoring and present the directions for desirable market surveillance policies. To this end, the effectiveness of market surveillance related to the distribution of products is verified through analysis of the interrelationships between the monitoring processes and performances of consumer organizations as well as their impact on the performances of the monitoring implementation processes; moreover, several improvement points and direction points are presented for more desirable monitoring of the consumer markets.

가스절연개폐장치용 감시시스템 적용에 관한 연구 (A study on the Application of a Monitoring System for Gas Insulaterd Switchgear)

  • 김정배;김민수;송원표;김덕수;전찬석;길경석
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제51권1호
    • /
    • pp.22-30
    • /
    • 2002
  • ln this paper, it was reported the developed results of the monitoring unit for 72.5kY GIS which it is one part of the monitoring system for the substation that Korea Railway Company is promoting. In order to monitor the operational status of GIS, four parameters were chosen: the number of times of the circuit breaker switching, tightness of the gas-sealed units (circuit breaker / disconnecting switch / earthing switch), the number of times of the lightning arrestor operating and the leakage current of the lighting arrester. We constructed the monitoring system that can be judged the operating condition of the GIS from the signal of the suitable sensor for the purpose. Therefore, it is possible to on line monitoring for the condition of the GlS without efforts of the Periodic inspection.

적외선 고막 체온계를 이용한 피판감시 (Flap Monitoring by Infra-red Thermometer)

  • 곽인수;홍준표
    • Archives of Reconstructive Microsurgery
    • /
    • 제13권1호
    • /
    • pp.82-85
    • /
    • 2004
  • Flap monitoring is important for flap salvage. Although there are many methods to observe the flap, practical methods mostly used are subjective methods. Recording flap surface temperature is one of the objective methods of flap monitoring. We used an infra-red thermometer to simplify monitoring of the flap temperature. 60 groin flaps of SD rats are used in the experiment. Artificial arterial or venous insufficiency was made and the surface temperature was checked and compared with body temperature. In the results, the temperature of the arterial clamped flaps was lower than that of body and the mean difference was $0.3^{\circ}C$ after 20 minutes of clamping. In the vein-clamped flaps, the mean decrease was $0.4^{\circ}C$ after 30 minutes of clamping. The all difference of the temperature between the flaps and body was statistically significant. Our results suggest that flap monitoring by infra-red thermometer is simple, useful and helpful to evaluate the flap status.

  • PDF

Wireless health monitoring of stay cable using piezoelectric strain response and smart skin technique

  • Kim, Jeong-Tae;Nguyen, Khac-Duy;Huynh, Thanh-Canh
    • Smart Structures and Systems
    • /
    • 제12권3_4호
    • /
    • pp.381-397
    • /
    • 2013
  • In this paper, wireless health monitoring of stay cables using piezoelectric strain sensors and a smart skin technique is presented. For the cables, tension forces are estimated to examine their health status from vibration features with consideration of temperature effects. The following approaches are implemented to achieve the objective. Firstly, the tension force estimation utilizing the piezoelectric sensor-embedded smart skin is presented. A temperature correlation model to recalculate the tension force at a temperature of interest is designed by correlating the change in cable's dynamic features and temperature variation. Secondly, the wireless health monitoring system for stay cables is described. A piezoelectric strain sensor node and a tension force monitoring software which is embedded in the sensor are designed. Finally, the feasibility of the proposed monitoring technique is evaluated on stay cables of the Hwamyung Grand Bridge in Busan, Korea.

Monitoring and Tracking Model of Logistics Based on ICT network

  • Cho, Sokpal;Chung, Heechang
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 추계학술대회
    • /
    • pp.489-492
    • /
    • 2016
  • Transportation in the logistics, many business organizations are engaged in monitoring and tracking the vehicles in order to improve logistics services, reduce expenses and secure security in cargo transportation. It is saving time and money by tracking and monitoring vehicles which transport cargo in supply chain of logistics. Therefore the main issue of delivery flow is to improve services, and ensure the safety in transportation system. This article suggests the tracking and monitoring model to keep safety transports on ICT network. It focuses on precise delivery control by monitoring and tracking vehicles to save time and costs. The status of product movement is analyzed for proper decision making. The vehicle embedded with RFID is automatically tracked in the movement process by tracking and monitoring model. The main role keeps safety tracking to reduce costs and to deliver products at proper time and location.

  • PDF