• 대한치과교정학회지
• /
• 제37권1호통권120호
• /
• pp.16-28
• /
• 2007

본 연구는 청소년의 교정 치료 시 중요한 교정 환자의 성장 평가 및 잔여 성장량 예측 방법을 개발하기 위하여 시행되었다. 이를 위하여 한국인의 전국적 표본 자료 중에서 $2\;{\sim}\;20$세 남자 4,893명, 여자 4,987명의 키 자료를 이용하여 성별 연령별 키에 대한 성장 곡선을 3차 스플라인 함수(NCSF)로 구현하였다. 이후 성장 예측 알고리즘을 개발하고 이를 임의로 선택된 200명의 종단 성장 자료를 이용하여 검증하였다. 검증에는 최종 키 예측 정확성과 검증 표본의 모든 연령에 대한 키 예측 오차 분석 및 NCSF 성장 곡선의 적합성 검사가 포함되었다. 그 결과 NCSF 성장 곡선은 기준 성장 곡선을 표현하는데 매우 적합한 것으로 나타났으며 최종 키 예측 정확성도 높았다. 또한 예측 정확성은 남자 보다 여자가 유의하게 높았다. 이러한 결과에도 불구하고 검증 표본의 모든 연령에 대한 키 예측 오차의 양상이 독립성과 정규성이 부족한 단점도 나타났다. 결론적으로 본 연구 결과 도출된 NCSF 성장 곡선을 이용한 성장 예측 방법의 높은 정확성에도 불구하고 개인의 종단 성장에 좀 더 적합한 성장 모형의 개발이 필요할 것으로 생각되었다.

• 한국의류학회지
• /
• 제46권3호
• /
• pp.454-463
• /
• 2022

This study aims to provide basic size data for the development of a hip dislocation prevention garment for cerebral palsy (CP) children and useful information for the design of garment products for CP children through identifying differences in body shape between CP and non-CP children and reviewing the tibial-stature prediction formulas of previous studies. Forty-seven Korean children with CP aged 2 to 14 years were measured for body size from October 2019 to August 2020. Body measurements of 18 sites, including greater trochanter length, which is an important site for a hip dislocation prevention garment, were collected and analyzed. Data of non-CP children were taken from same age of Size Korea and compared. Tibial-stature prediction formulas suggested in four previous studies were also reviewed. CP children had significantly lower stature as well as circumferential dimensions when compared to non-CP children. Greater trochanter length is difficult to predict through other body dimensions. Thus, direct measurement is required. Of the general key dimensions used in the clothing industry, only hip circumference could explain the body shape of CP children. Tibial-stature prediction formulas cannot always but tend to largely predict the actual stature of CP children.

• Journal of Nutrition and Health
• /
• 제28권1호
• /
• pp.71-83
• /
• 1995

The purpose of the study was to develop generalized equations for estimating stature and weight for the nonambulatory elderly persons. Height weight recumbent knee height total ann length, midarm, waist and calf circumferences, triceps and subscapular skinfolds were measured from over 60 years old 315 ambulatory elderly. The equations to predict stature and weight were derived from participants in the validation sample and were applied to the participants in the cross-validation to test the accuracy and validity of equations. Stature and weight were significantly and negatively associated with age of women and similar patterns observed in men but associated to a slight degree. Knee height and total arm length were highly correlated with stature but the majority of the variances in stature was accounted for by knee height for both the men and women. In men, waist circumference was the most significantly correlated with weight and am, calf circumferences and so forth. But in women arm circumference was the highest then waist and calf circumference in order. The possible predictor variables to estimate of stature were knee height total arm length and age for both elderly men and women. Predictor variables to estimate of weight were recumbent measures of waist am, calf circumferences and knee height for both sexes. Inclusion of skinfold thickness measurements did not improve the prediction power of estimation for weight. When both equations developed from the present study and Chumlea's study were applied to cross-valida-tions samples, the equations derived from present study showed better accuracy and validity. The presentation of prediction equations using two, three, or four recommended measurements allows the selection of an equation based upon the measurements that are possible to collect on an individual basis.

• Anatomy and Cell Biology
• /
• 제56권2호
• /
• pp.259-267
• /
• 2023

Stature is an essential component of biological profile analysis since it determines an individual's physical identity. Long bone dimensions are generally used to estimate the stature of skeletal remains; however, non-long bones such as the sternum, cranium, and sacrum may be necessary for some forensic situations. This study aimed to generate a regression equation for stature estimation of the skeletal remains in the Thai population. Ten measurements of the sacrum were measured from 200 dry sacra. The results revealed that the maximum anterior breadth (MAB) provided the most accurate stature prediction model among males (correlation coefficient [r]=0.53), standard error of estimation (SEE=5.94 cm), and females (r=0.48, SEE=6.34 cm). For the multiple regression model, the best multiple regression models were stature equals 41.2+0.374 (right auricular surface height [RASH])+1.072 (anterior-posterior outer diameter of S₁ vertebra corpus [APOD])+0.256 (dorsal height [DH])+0.417 (transverse inner diameter of S₁ vertebra corpus [TranID])+0.2 (MAB) with a SEE of 6.42 cm for combined sex. For males, stature equals 63.639+0.478 (MAB)+0.299 (DH)+0.508 (APOD) with a SEE of 5.35, and stature equals 75.181+0.362 (MAB)+0.441 (RASH)+0.132 (maximum anterior height [MAH]) with a SEE of 5.88 cm for females. This study suggests that regression equations derived from the sacrum can be used to estimate the stature of the Thai population, especially when a long bone is unavailable.

• 산업공학
• /
• 제16권spc호
• /
• pp.144-148
• /
• 2003

A group of digital human models with various sizes which properly represents a population under consideration is needed in the design process of an ergonomic product in virtual environment. The present study proposes a two-step method which produces a representative group of human models in terms of stature and weight. The proposed method first generates a designated number of pairs of stature and weight within an accommodation range from the bivariate normal distribution of stature and weight of the target population. Then, from each pair of stature and weight, the method determines the sizes of body segments by using 'hierarchical' regression models and corresponding prediction distributions of individual values. The suggested method was applied to the 1988 US Army anthropometric survey data and implemented to a web-based system which generates a representative group of human models for the following parameters: nationality, gender, accommodation percentage, and number of human models.

• 해부∙생물인류학
• /
• 제31권4호
• /
• pp.121-131
• /
• 2018

사람의 키는 당사자가 갖고 있는 고유한 생물학적 특질이기 때문에 어떤 사람의 신원을 특정하고자 할 때 유용한 단서로 활용할 수 있다. 이러한 이유로 범죄 사건이나 재난 상황이 발생한 경우 신원 불상 피해자의 신원을 확인하기 위해 표준화된 절차에 따라 키를 추정한다. 하지만 키를 추정하는 절차나 방법이 올바르지 않다면 추정된 키의 정확도는 낮을 수밖에 없다. 본 연구에서는 국내에서 발견된 백골 변사자에 대한 법의인류학적 감정 내용 가운데 키 추정을 위해 사용되는 방법의 적정성을 검토하고 키 추정치의 정확도를 높일 수 있는 방법들을 살펴보고자 한다. 이를 위해 국립과학수사연구원에 의뢰된 560건의 백골 변사자에 대한 부검 결과를 검토하였고, 구체적인 논의를 위해 고(故) 유병언씨(이하 '유씨'로 칭함)의 키 추정 사례를 이용하였다. 유씨의 키는 Trotter (1970)의 공식 가운데 표준오차가 더 적은 종아리뼈 공식이 있음에도 불구하고 넙다리뼈 공식을 이용해 추정됐다. 추정 결과를 보고하는데 있어서 '표준오차(standard error)'를 '오차구간'으로 간주함으로써 추정치의 범위를 지나치게 좁게 제시했다. 또, 나이듦에 따른 키 감소분을 고려하지 않았기 때문에 부검감정서 상의 유씨의 키는 사망 당시의 키가 아닌 생전 당시의 최고 키라고 해석하는 게 타당하다. 마지막으로, 한국인 여성의 키를 추정하기 위해 백인 여성 공식을 사용하게 되면 실제보다 키를 작게 추정할 가능성이 높다. 키 추정의 정확도를 높이기 위해 해부학적 방법을 고려할 필요가 있다. 만약 해부학적 방법의 적용이 곤란한 경우라면 한국인 자료를 이용해 개발된 공식을 적용하는 게 바람직하다. 1980년대 이후 한국인 자료를 이용해 키를 추정할 수 있는 방법들이 다수 개발됐다. 한국인을 대상으로 한 공식을 적용해 변사자의 키를 보다 정확히 추정한다면 향후 한국에서 발견된 변사자의 신원 확인 가능성 또한 높아질 것으로 기대된다.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.680-692
• /
• 2018

Children's health is interesting to parents and society. A system that assists to monitor the development of their children and gives nutritional advices is an interesting of parents. In this study, we present a system that allows to track the heights and weights of a child since he/she was born up to adulthood, to predict his age of puberty, and to provide nutritional advice. Particularly, it predicts the height in near future and the adult stature for detecting the child with abnormal development. We applied Sager's model for predicting the height in near future by using interpolation and regression techniques before puberty. After determining the puberty time, we proposed a model for predicting the height. Then we applied fuzzy logic for evaluating the health status and providing nutritional advice. Our system predicted stature in near future with error bound of $1.7361{\pm}0.0397cm$ in girls and $2.4020{\pm}0.0799cm$ in boys. Our model also gave a reliable adult stature prediction with error bound of $0.3507{\pm}0.2808cm$ in girls and $1.3414{\pm}0.7024cm$ in boys. At the same time, the nutrition was provided appropriately in terms of protein, lipid, glucid. We implemented a program based on this research. Our system promises to improve the health of every child.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.84-95
• /
• 2020

Wearing ease is a critical factor when designing special uniforms such as flight pilot's garment and should reflect occupational properties for better performance. This study measured skin surface on 31 areas in seven postures that refer to the pilot's occupational postures as well as made six prediction models including linear mixed model (LMM) for each body part to find the best fit model. Skin surface measured from 3D body scanned images of 11 male pilot participants. There were significantly positive and negative changes in various areas from standing posture (P1) to dynamic postures (P2-P7). Six models were designed in various compositions using stature and chest circumference as fixed effects and subject and posture as random effects. The best models were linear mixed models with one fixed effect (chest circumference or stature, varies with body parts) and two random effects (subject and posture). The results of this study provide reference data to set wearing ease for pilot's garment and suggests a new methodology in this research area, but verifying the effect of diverse independent variables is left for future studies.

• Animal Bioscience
• /
• 제37권4호
• /
• pp.555-566
• /
• 2024

Objective: This study aimed to assess the genetic parameters and accuracy of genomic predictions for twenty-four linear body conformation traits and overall conformation scores in Korean Holstein dairy cows. Methods: A dataset of 2,206 Korean Holsteins was collected, and genotyping was performed using the Illumina Bovine 50K single nucleotide polymorphism (SNP) chip. The traits investigated included body traits (stature, height at front end, chest width, body depth, angularity, body condition score, and locomotion), rump traits (rump angle, rump width, and loin strength), feet and leg traits (rear leg set, rear leg rear view, foot angle, heel depth, and bone quality), udder traits (udder depth, udder texture, udder support, fore udder attachment, front teat placement, front teat length, rear udder height, rear udder width, and rear teat placement), and overall conformation score. Accuracy of genomic predictions was assessed using the single-trait animal model genomic best linear unbiased prediction method implemented in the ASReml-SA v4.2 software. Results: Heritability estimates ranged from 0.10 to 0.50 for body traits, 0.21 to 0.35 for rump traits, 0.13 to 0.29 for feet and leg traits, and 0.05 to 0.46 for udder traits. Rump traits exhibited the highest average heritability (0.29), while feet and leg traits had the lowest estimates (0.21). Accuracy of genomic predictions varied among the twenty-four linear body conformation traits, ranging from 0.26 to 0.49. The heritability and prediction accuracy of genomic estimated breeding value (GEBV) for the overall conformation score were 0.45 and 0.46, respectively. The GEBVs for body conformation traits in Korean Holstein cows had low accuracy, falling below the 50% threshold. Conclusion: The limited response to selection for body conformation traits in Korean Holsteins may be attributed to both the low heritability of these traits and the lower accuracy estimates for GEBVs. Further research is needed to enhance the accuracy of GEBVs and improve the selection response for these traits.

• 대한인간공학회지
• /
• 제22권3호
• /
• pp.57-73
• /
• 2003

Although body pressure distribution is sensitive to movements and is relatively simple to measure even in small space, there are few researches involving applications to driver's posture and its change. The main objective in this study is the application of body pressure distribution measurements for the prediction of the driver's posture and its change. This requires quantitative analyses of the dynamic body pressure distribution, which is the change of body pressure distribution with time. The experiment involved 16 male subjects who drove for 45 minutes in a seating buck. Measurement time, stature group, and lumbar support prominence were selected as independent variables, with subjective ratings of driver's discomfort, body posture data of hip, torso. knee angle, and body pressure data variables as dependent variables. The body pressure change variables and subjective ratings were found to increase as the measurement time increased and body pressure ratio variables reflected the torso angle. From the results and analysis of the body posture data and subjective rating results, it was predicted that the seats and the design of the lumbar supports used in the experiment was not fit for tall subjects, which could also be confirmed through the body pressure distribution data.