• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.562-568
• /
• 2010

In this paper, a low cost magnetic position sensor for linear position detection is proposed. The proposed magnetic sensor can be applied to the linear motor which has stator with periodical teeth, such as transverse flux linear motor(TFLM). Sine and cosine waves can be generated from the unit sensor module as the linear motor moves, and the outputs can be converted to the position data by interpolation IC. To reduce the speed ripple caused by the position error, the Luenberg observer is introduced. The validity of the proposed magnetic position sensor is verified by experiment with a 750N three-phase TFLM.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.109-111
• /
• 1997

A sensorless drive of induction motor has several advantages; low cost and mechanical simplicity. This paper investigates a field-oriented control method without speed and flux sensors. The control strategy is to design an adaptive state observer for flux estimation and to estimate the rotor speed from the estimated rotor flux and stator current. The entire control algorithm including space vector PWM is implemented by software of the digital signal processor TMS320C31. The experimental results indicate good speed responses.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.653-658
• /
• 2022

This paper presents a Maximum Torque per Ampere (MTPA) control algorithm for an interior permanent magnet synchronous motor (IPMSM) drive considering the permanent magnet (PM) flux linkage variations due to PM temperature variation. PM flux linkage are estimated in real time via a Gopinath style stator flux linkage observer and a torque error correction factor is calculated from the estimated PM flux linkage. A 2-dimensional (2D) MTPA look-up table (LUT) is developed to achieve the MTPA trajectory reflecting PM flux linkage variation for compensating torque error occurred by parameter variation. The proposed IPMSM control algorithm is verified through simulations.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1165-1168
• /
• 2001

The effect of sensor faults in DTC based induction motor drives is analyzed and a fault detection problem is treated. An adaptive gain scheduling observer is proposed for the design of DTC controller and a fault detection system. The observer provides not only the estimate of stator flux, a key variable in DTC system, but also the estimates of stator current, rotor speed that are useful for fault detection purpose. Simulations for various type of sensor faults are performed to evaluate the performance of the overall control system and the proposed sensor fault detection scheme.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.330-335
• /
• 1998

In this paper the robust vector control method of induction motor for the purpose of improving the system performance deterioration caused by parameter variations is proposed. The estimations of the stator current and the rotor flux are obtained by the full order state observer with corrective prediction error feedback. and the adaptive scheme is constructed to estimate the rotor speed with the error signal between real and estimation value of the stator current. Adaptive sliding observer based on the variable structure control is applied to parameter identification. Consequently predictive current control and speed sensorless vector control can be obtained simultaneously regardless of the parameter variations.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1030-1032
• /
• 2000

Direct torque control algorithm for 3-level inverter-fed induction motors is proposed. Conventional selection method of the stator voltage vector shows problems of stator flux drooping phenomenon and undesirable torque control appeared especially at the low, speed operation. To overcome these problems, a proposed method uses intermediate voltage vectors, which are inherently generated in 3-level inverters. An adaptive observer is also employed to estimate some state-variables and motor parameters, which takes a deep effect on the performance of the low speed operation. Simulation and experiment results verify effectiveness of the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1922-1924
• /
• 1998

In this paper, the robust vector control method of Induction Motor for the purpose of improving the system performance deterioration caused by parameter variations is proposed. The full order state observer estimates the stator current and the rotor flux by using the state prediction of state variables. And, the motor speed is estimated without speed sensor using the full order state observer. Also, the parameter variation is compensate by the Sliding Observer. By using this method, speed sensorless control and current contol with no affection of the parameter variation can be obtained simultaneously.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1166-1176
• /
• 2017

Estimation errors of the rotor speed and position in sensorless control systems of Permanent Magnet Synchronous Motors (PMSM) will lead to low efficiency and dynamic-performance degradation. In this paper, a parallel-type extended nonlinear observer incorporating the nominal parameters is constructed in the stator-fixed reference frame, with rotor position, speed, and the load torque simultaneously estimated. The stability of the extended nonlinear observer is analyzed using the indirect Lyapunov's method, and observer gains are selected according to the transfer functions of the speed and position estimators. Taking into account the parameter inaccuracies issue, explicit estimation error equations are derived based on the error dynamics of the closed-loop sensorless control system. An equivalent flux error is defined to represent the back Electromotive Force (EMF) error caused by the inaccurate motor parameters, and a compensation strategy is designed to suppress the estimation errors. The effectiveness of the proposed method has been validated through simulation and experimental results.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.3
• /
• pp.139-143
• /
• 1999

This paper is on realization of the speed-sensorless vector control of an induction motor using the RLS(Recursive Least Square) algorithm. The speed estimator is including the RLS algorithm and a rotor flux observer. The RLS algorithm has speed and rotor time constant as parameter vectors and rotor flux observer is designed to have robustness to stator resistance variation and through the IP(Integral and Proportional) speed controller stable performance is obtained for estimating rotor speed. Finally the total algorithm are realized in induction motor drive system and its effectiveness is verified.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.179-181
• /
• 2004

This paper is proposed an adaptive fuzzy-neural network(A-FNN) controller based on the vector controlled induction motor drive system. The hybrid combination of fuzzy control and neural network will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed speed estimation of induction motor using A closed-loop state observer. The rotor position is calculated through the stator flux position and an estimated flux value of rotation reference frame. A closed-loop state observer is implemented to compute the speed feedback signal. The results of analysis prove that the proposed control system has strong robustness to rotor parameter variation, and has good steady-state accuracy and transitory response.