• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.281-287
• /
• 2013

A major barrier to progress in pig to primate organ transplantation or cell therapy is the presence of terminal ${\alpha}$-1,3-galactosyl epitopes on the surface of pig cells. Therefore, the purpose of this experiment was to establish and cha- racterize mesenchymal stromal/stem cells (MSCs) derived from ${\alpha}$-1,3-galactosyltransferase (GalT) knock out (GalT KO) pig to confirm their potential for cell therapy. Bone marrow (BM)-MSCs from GalT KO pig of 1 month old were isolated by Ficoll-Paque PLUS gradient and cultured with A-DMEM + 10% FBS on plastic dishes in 5% $CO_2$ incubator at 38.5. GalT KO BM-MSCs were analyzed for the expression of CD markers ($CD45^-$, $29^+$, $90^+$ and $105^+$) and in vitro differentiation ability (adiopogenesis and osteogenesis). Further, cell proliferation capacity and cell aging of GalT KO BM-MSCs were compared to Wild BM-MSCs by BrdU incorporation assay (Roche, Germany) using ELISA at intervals of two days for 7 days. Finally, the cell size was also evaluated in GalT KO and Wild BM-MSCs. Statistical analysis was performed by T-test (P<0.05). GalT KO BM-MSCs showed fibroblast-like cell morphology on plastic culture dish at passage 1 and exhibited $CD45^-$, $29^+$, $90^+$ and $105^+$ expression profile. Follow in ginduction in StemPro adipogenesis and osteogenesis media for 3 weeks, GalT KO BM-MSCs were differentiated into adipocytes, as demonstrated by Oilred Ostaining of lipid vacuoles and osteocytes, as confirmed by Alizarinred Sstaining of mineral dispositions, respectively. BrdU incorporation assay showed a significant decrease in cell proliferation capacity of GalT KO BM-MSCs compared to Wild BM-MSCs from 3 day, when they were seeded at $1{\times}10^3$ cells/well in 96-well plate. Passage 3 GalT KO and Wild BM-MSCs at 80% confluence in culture dish were allowed to form single cells to calculate cell size. The results showed that GalT KO BM-MSCs($15.0{\pm}0.4{\mu}m$) had a little larger cell size than Wild BM-MSCs ($13.5{\pm}0.3{\mu}m$). From the above findings, it is summarized that GalT KO BM-MSCs possessed similar biological properties with Wild BM-MSCs, but exhibited a weak cell proliferation ability and resistance to cell aging. Therefore, GalT KO BM-MSCs might form a good source for cell therapy after due consideration to low proliferation potency in vitro.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.35-39
• /
• 2010

Purpose: The aim of this study was to investigate distribution of particle size in phytate kit and compare filtered method with non-filtered method using 200 nm filter for sentinel lymphoscintigraphy (SLS). Materials and Methods: Five phytate kit of having the same available period was measured by particle size analyzer. For in-vivo experiment, $^{99m}Tc$-phytate was injected intradermally at both foot to perform lymphoscintigraphy. Imaging was acquired at 1hour after injection. Region of interest (ROI) was drawn in inguinal and background area for analysis. RAW 264.7 cells (Murine macrophage cell) were prepared for measurement of celluar uptake as a representative of macrophages. Paired t-test was performed using SPSS (SPSS Inc, USA) for statistical analysis. Results: The size of most particle in Techne phytate kit was distributed in 130~650 nm(90.5 %). In-vivo study, the ROI analysis showed similar result between filtered and non-filtered sample, and the numerical value of count/pixel were $58.3{\pm}5.97$ and $60.2{\pm}4.88$. In-vitro study, cellular uptake study also showed no difference between filtered and non-filtered sample by gamma counting. Conclusion: The present study demonstrates that there was no meaning of 200 nm filtered method for SLS using $^{99m}Tc$-phytate.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.145-157
• /
• 2004

The cycle length design model of the Korean traffic responsive signal control systems is devised to vary a cycle length as a response to changes in traffic demand in real time by utilizing parameters specified by a system operator and such field information as degrees of saturation of through phases. Since no explicit guideline is provided to a system operator, the system tends to include ambiguity in terms of the system optimization. In addition, the cycle lengths produced by the existing model have yet been verified if they are comparable to the ones minimizing delay. This paper presents the studies conducted (1) to find shortcomings embedded in the existing model by comparing the cycle lengths produced by the model against the ones minimizing delay and (2) to propose a new direction to design a cycle length minimizing delay and excluding such operator oriented parameters. It was found from the study that the cycle lengths from the existing model fail to minimize delay and promote intersection operational conditions to be unsatisfied when traffic volume is low, due to the feature of the changed target operational volume-to-capacity ratio embedded in the model. The 64 different neural network based cycle length design models were developed based on simulation data surrogating field data. The CORSIM optimal cycle lengths minimizing delay were found through the COST software developed for the study. COST searches for the CORSIM optimal cycle length minimizing delay with a heuristic searching method, a hybrid genetic algorithm. Among 64 models, the best one producing cycle lengths close enough to the optimal was selected through statistical tests. It was found from the verification test that the best model designs a cycle length as similar pattern to the ones minimizing delay. The cycle lengths from the proposed model are comparable to the ones from TRANSYT-7F.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.261-277
• /
• 2017

This study defines influencing sections as the part of the road section where passing vehicles are traveling with the lower speed compared to speed limit due to speed humps. The influencing section was divided into 3 parts; influencing section before the speed hump, interval section, and influencing section after the speed hump. This analysis focused on the changes of each part depending on installation types, vehicle types, and daytime or nighttime. For the interval section, especially, the ratio of distance traveled with lower speed than speed limit to interval section is defined as effective influencing section ratio to be analyzed. Vehicle speed profiles were collected with a speed gun to extract influencing section lengths. The survival analysis was applied and estimated survival functions are compared with each other by several statistical tests. As a consequence, the average length of influencing section on the 50m sequential speed humps was 75.3% longer during the deceleration than that of isolated speed hump, and 18.9% during the acceleration. The effective influencing section ratio for the 30m and 50m sequential speed humps had a small difference of 81.0% and 76.0% while the absolute values of the section that passing speed were less than the speed limit were longer on 50m sequential speed humps, each being 24.3m and 38.0m. Using the log rank test, it was evident that sequential speed humps were more effective to increase the length of influencing sections compared to the isolated speed hump. Vehicle type was the strong factor for influencing section length on the isolated speed hump, but daytime or nighttime was not the effective one. This research result can be used for improving the efficiency selecting the installation point of speed humps for road safety and estimating the standard of the distance between sequential speed humps.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.342-347
• /
• 2005

This study was designed to assess the healing effects of ascorbic acid on full-thickness skin wound in dogs. Four $2.5\pm2.5cm$ full-thickness skin wounds were created bilaterally on the dorsolateral aspect in each of 5 dogs. The ten wounds were treated with ascorbic acid solution in the experimental group, and the ten wounds were treated with $0.9\%$ saline in the control group. The wound healing area was measured every other day for 3 weeks after the wounding. Statistical analysis was conducted with the paired t-test. On the $1^{st},\;3^{rd},\;5^{th},\; 7^{th},\;9^{th},\;11^{th},\;13^{th},\;15^{th},\;17^{th},\;19^{th},\;21^{st}days$, the wound healing rates were $12.6\pm9.6\%,\;9.5\pm9.8\%,\;18.9\pm9.0\%,\;39.2\pm5.4\%,\;62.2\pm4.6\%,\;86.9\pm1.9\%,\;92.9\pm1.8\%,\;96.6\pm1.6\%,\;99.1\pm0.5\%,\;99.8\pm0.2\%,\;99.9\pm0.1\%$ in the experimental group, and $9.1\pm6.0\%,\;9.2\pm6.0\%,\;12.2\pm5.0\%,\;41.3 \pm6.3\%,\;54.2\pm9.2\%,\;81.0\pm2.6\%,\;85.7\pm2.8\%,\;92.3\pm1.5\%,\;96.1\pm0.7\%,\;98.0\pm0.8\%,\;99.5\pm0.2\%$ in the control group On the $15^{th}$ day, the wound closed above $99\%$ in 2 dogs of the experimental group. On the $17^{th}$ day, the wound closed above $99\%$ in 3 dogs of the experimental group. On the $19^{th}$ day, the wound closed above $99\%$ in 5 dogs of the experimental group, and 2 dogs of the control group. On the $21^{st}$ day, the wound closed above $99\%$ in 5 dogs of the experimental group, and 4 dogs of the control group. The wound healing rate of the experimental group was $2\~4$ days faster than that of the control group. The tensile strength was $4,169\pm1,107g/cm^2$ in the experimental group, and $2,438\pm637g/cm^2$ in the countrol group on the$21^{st}$ day after wounding. Tensile strength was significantly higher in the experimental group than in the control group (p<0.05). The histopathological findings of the experimental group were similar to those of the control group on the $1^{st},\;3^{rd}\;and\;5^{th}$days. Inflammation and revascularization of the experimental group were similar to those of the control group on the $9^{th},\;13^{th}\;and\;21^{st}$days. The formation of collagen and reepithelialization were more developed the experimental group than in the control group on the $9^{th},\;13^{th}\;and\;21^{st}$days. Significantly higher wound healing rate, tensile strength and better histopathological findings were observed in the experimental group than in the control group. These results suggest that the topical application of ascorbic acid on full-thickness skin wounds can promote wound healing process.

• Journal of agricultural medicine and community health
• /
• v.41 no.1
• /
• pp.13-26
• /
• 2016

Purpose: This study was performed to identify the association between family support, activities of daily living (ADL) and depression among hospitalized older patients with chronic diseases. Methods: This study subjects were 100 elderly patients with chronic diseases including chronic respiratory diseases, diabetes mellitus and et al. in a general hospital. The collected data were patient characteristics, family support, ADL, and depression by structured questionnaire and medical chart review. The used statistical analyses were t-test, analysis of variance, Pearson's correlational analysis and multiple regression analysis. Results: The mean scores of family support, ADL and depression were $49.95{\pm}8.68$, $8.65{\pm}2.65$, $6.66{\pm}3.78$, respectively. The prevalence rate of depression was 64.0%. In simple analysis, the statistically significant associated factors with depression were age, spouse, economic status, social activity, subjective health status, and number of pain. Depression had statistically a significant positive correlation with ADL and a negative correlation with family support. The final result of hierarchial multiple regression analysis (Model 3), the factors related to depression were family support (b=-.135, p<.001), subjective health status (b=2.510, p=.001). Conclusions: It is necessary to develop and apply the program for controlling the depression of elderly patients with health education, reinforcement of supportive systems in hospital. And, further multidisciplinary studies should be done.

• Journal of Korean Home Economics Education Association
• /
• v.15 no.3
• /
• pp.89-103
• /
• 2003

The purpose of this study was to investigate to relation of necessity and practice of contents of clothing and textiles education(classify them into four units, choice and dressing of clothes, textile and management of clothes, design and sewing of clothes, knitting and embroidery). Method of posing a questionnaire is adopted to obtain stochastic data required for pertinent analysis. This is the investigation of which 400 (high school students 204, university students 196) girl students located in Choongnam and Junrabookdo province. In this statistical analysis, SPSS 10.0 for Windows Program was utilized to calculate percentage, mean and standard deviation. Also, these materials were verified by t-test, One-way Anova, Pearson's correlation coefficient. The results of this research were as follows. First, girl students' necessity mean point were higher than practice mean point about the contents of clothing and textiles education. And necessity had a positive relationship with practices of contents of clothing and textiles education. Second, there was a significant difference in necessity and practice of contents of clothing and textiles education according to demographic variables. These results should be provide fundamental information for improving students' critical practice in their real life. Since this study has touched only limited research on the topic of clothing and textiles education, it is essential that further research covering a wider array of themes be done in the future. this study has touched only limited research on the topic of clothing and textiles education, it is essential that further research covering a wider array of themes be done in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.490-499
• /
• 2008

Statement of problem: Bioactive materials must have the ability to spontaneously form a bone like apatite layer on their surface and induce direct biochemical bonding to bone. A simple chemical treatment via alkali and heat has been revealed to induce bioactivity in titanium. Purpose: The purpose of this study was to evaluate the surface characteristics and stability of alkali and heat treated implants. Material and methods: Specimens were divided into three groups; group 1 was the control group with machined surface implants, groups 2 and 3 were treated with alkali solutions and heat treated in the atmosphere and vacuum conditions respectively. The surface characteristics were observed with FESEM, XPS, TF-XRD and AFM. Stability was evaluated with the resonance frequency analysis, periotest and removal torque values. One-way ANOVA and Duncan test were used for statistical analysis. Results: 1. Groups treated with alkali and heat showed similar characteristics. Groups 2 and 3 showed high compositions of Na ions on the surface with sub-micron sized pores compared to group 1. Group 2 showed mixed compositions of anatase and rutile with superior contents of rutile. 2. Resonance frequency analysis : The ISQ of group 2 showed significantly higher values than that of groups 1 and 3 at 12 weeks. The ISQ of groups 1 and 2 showed significant increase after 4 weeks, and the ISQ of group 3 increased significantly after 2 and 4 weeks respectively (P < .05). 3. Periotest: The PTV of groups 1 and 2 showed significant decrease after 4 weeks, and the PTV of group 3 showed significant decrease after 2 and 4 weeks respectively (P < .05). 4. Removal torque analysis: The removal torque value of group 2 was significantly higher than those of groups 1 and 3 at 2, 4 and 8 weeks. The removal torque values of groups 1 and 3 showed increase at 4 and 12 weeks, but the removal torque value of group 2 showed increase after 4 weeks (P < .05). Conclusion: An oxide layer with appropriate crystal structure and amorphous sodium titanate layer can be obtained on titanium implants through alkali and heat treatment in the atmosphere, and even alkali and heat treatment in vacuum conditions, provided a bioactive surface containing sodium. These surface layers can be considered to be effective for enhancement of osseointegration and reduction of healing period for implant treatment.

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.117-137
• /
• 2009

Recently, intelligent traffic information systems have enabled people to forecast traffic conditions before hitting the road. These convenient systems operate on the basis of data reflecting current road and traffic conditions as well as distance-based data between locations. Thanks to the rapid development of ubiquitous computing, tremendous context data have become readily available making vehicle route planning easier than ever. Previous research in relation to optimization of vehicle route planning merely focused on finding the optimal distance between locations. Contexts reflecting the road and traffic conditions were then not seriously treated as a way to resolve the optimal routing problems based on distance-based route planning, because this kind of information does not have much significant impact on traffic routing until a a complex traffic situation arises. Further, it was also not easy to take into full account the traffic contexts for resolving optimal routing problems because predicting the dynamic traffic situations was regarded a daunting task. However, with rapid increase in traffic complexity the importance of developing contexts reflecting data related to moving costs has emerged. Hence, this research proposes a framework designed to resolve an optimal route planning problem by taking full account of additional moving cost such as road traffic cost and weather cost, among others. Recent technological development particularly in the ubiquitous computing environment has facilitated the collection of such data. This framework is based on the contexts of time, traffic, and environment, which addresses the following issues. First, we clarify and classify the diverse contexts that affect a vehicle's velocity and estimates the optimization of moving cost based on dynamic programming that accounts for the context cost according to the variance of contexts. Second, the velocity reduction rate is applied to find the optimal route (shortest path) using the context data on the current traffic condition. The velocity reduction rate infers to the degree of possible velocity including moving vehicles' considerable road and traffic contexts, indicating the statistical or experimental data. Knowledge generated in this papercan be referenced by several organizations which deal with road and traffic data. Third, in experimentation, we evaluate the effectiveness of the proposed context-based optimal route (shortest path) between locations by comparing it to the previously used distance-based shortest path. A vehicles' optimal route might change due to its diverse velocity caused by unexpected but potential dynamic situations depending on the road condition. This study includes such context variables as 'road congestion', 'work', 'accident', and 'weather' which can alter the traffic condition. The contexts can affect moving vehicle's velocity on the road. Since these context variables except for 'weather' are related to road conditions, relevant data were provided by the Korea Expressway Corporation. The 'weather'-related data were attained from the Korea Meteorological Administration. The aware contexts are classified contexts causing reduction of vehicles' velocity which determines the velocity reduction rate. To find the optimal route (shortest path), we introduced the velocity reduction rate in the context for calculating a vehicle's velocity reflecting composite contexts when one event synchronizes with another. We then proposed a context-based optimal route (shortest path) algorithm based on the dynamic programming. The algorithm is composed of three steps. In the first initialization step, departure and destination locations are given, and the path step is initialized as 0. In the second step, moving costs including composite contexts into account between locations on path are estimated using the velocity reduction rate by context as increasing path steps. In the third step, the optimal route (shortest path) is retrieved through back-tracking. In the provided research model, we designed a framework to account for context awareness, moving cost estimation (taking both composite and single contexts into account), and optimal route (shortest path) algorithm (based on dynamic programming). Through illustrative experimentation using the Wilcoxon signed rank test, we proved that context-based route planning is much more effective than distance-based route planning., In addition, we found that the optimal solution (shortest paths) through the distance-based route planning might not be optimized in real situation because road condition is very dynamic and unpredictable while affecting most vehicles' moving costs. For further study, while more information is needed for a more accurate estimation of moving vehicles' costs, this study still stands viable in the applications to reduce moving costs by effective route planning. For instance, it could be applied to deliverers' decision making to enhance their decision satisfaction when they meet unpredictable dynamic situations in moving vehicles on the road. Overall, we conclude that taking into account the contexts as a part of costs is a meaningful and sensible approach to in resolving the optimal route problem.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.1909-1915
• /
• 2016

Background: The purpose of this study was to determine the benefit of tertiary cytoreductive surgery (TC) for secondary recurrent epithelial ovarian cancer (EOC), focusing on whether optimal cytoreduction has an impact on disease-free survival, and whether certain patient characteristics could identify ideal candidates for TC. Materials and Methods: Retrospective analysis of secondary recurrent EOC patients undergoing TC at three Turkish tertiary institutions from May 1997 to July 2014 was performed. All patients had previously received primary cytoreduction followed by intravenous platinum-based chemotherapy and secondary cytoreduction for first recurrence. Clinical and pathological data were obtained from the patients' medical records. Survival analysis was caried out using the Kaplan Meier method. Actuarial curves were compared by the two tailed Logrank test with a statistical significance level of 0.05. Results: Median age of the patients was 49.6 years (range, 30-67) and thirty-eight (72%) had stage III-IV disease at initial diagnosis. Twenty six (49%) had optimal and 27 (51%) suboptimal cytoreduction during tertiary debulking surgery. Optimal initial cytoreduction, time to first recurrence, optimal secondary cytoreduction, time interval between secondary cytoreduction and secondary recurrence, size of recurrence, disease status at last follow-up were found to be significant risk factors to predict optimal TC. Optimal cytoreduction in initial and tertiary surgery and serum CA-125 level prior to TC were independent prognostic factors on univariate analysis. Conclusions: Our results and a literature review clearly showed that maximal surgical effort should be made in TC, since patients undergoing optimal TC have a better survival. Thus, patients with secondary recurrent EOC in whom optimal cytoreduction can be achieved should be actively selected.