• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.476-485
• /
• 2013

In this paper, the effective capacity of a multiple-input multiple-output (MIMO) system in two different cases with receive antenna selection (RAS) and transmit antenna selection (TAS) schemes is investigated. A closed-form solution for the maximum constant arrival rate of this network with statistical delay quality of service (QoS) constraint is extracted in the quasi-static fading channel. This study is conducted in two different cases.When channel state information (CSI) is not available at the MIMO transmitter, implementation of TAS is difficult. Therefore, RAS scheme is employed and one antenna with the maximum instantaneous signal to noise ratio is chosen at the receiver. On the other hand, when CSI is available at the transmitter, TAS scheme is executed. In this case, one antenna is selected at the transmitter. Moreover, an optimal power-control policy is applied to the selected antenna and the effective capacity of the MIMO system is derived. Finally, this optimal power adaptation and the effective capacity are investigated in two asymptotic cases with the loose and strict QoS requirements. In particular, we show that in the TAS scheme with the loose QoS restriction, the effective capacity converges to the ergodic capacity. Then, an exact closed-form solution is obtained for the ergodic capacity of the channel here.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.100-107
• /
• 2015

Recently as the manufacturers want competitiveness in dynamically changing environment, they are trying a lot of efforts to be efficient with their production systems, which may be achieved by diminishing unplanned operation stops. The operation stops and maintenance cost are known to be significantly decreased by adopting proper maintenance strategy. Therefore, the manufacturers were more getting interested in scheduling of exact maintenance scheduling to keep smooth operation and prevent unexpected stops. In this paper, we proposedan integrated maintenance approach in injection molding manufacturing line. It consists of predictive and preventive maintenance approach. The predictive maintenance uses the statistical process control technique with the real-time data and the preventive maintenance is based on the checking period of machine components or equipment. For the predictive maintenance approach, firstly, we identified components or equipment that are required maintenance, and then machine parameters that are related with the identified components or equipment. Second, we performed regression analysis to select the machine parameters that affect the quality of the manufactured products and are significant to the quality of the products. By this analysis, we can exclude the insignificant parameters from monitoring parameters and focus on the significant parameters. Third, we developed the statistical prediction models for the selected machine parameters. Current models include regression, exponential smoothing and so on. We used these models to decide abnormal patternand to schedule maintenance. Finally, for other components or equipment which is not covered by predictive approach, we adoptedpreventive maintenance approach. To show feasibility we developed an integrated maintenance support system in LabView Watchdog Agent and SQL Server environment and validated our proposed methodology with experimental data.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.115-123
• /
• 2022

Statistics on the occurrence of fires in residential facilities over the past 10 years, show that approximately 40% are fires in apartment buildings. To prevent the spread of fire and support evacuation in apartment housing, the fire resistance performance and performance design of fire doors are becoming more important. This study established a database using 395 quality inspection reports from 2016 to 2020, which passed the fire performance test, and derived the fire door performance-influencing factors through an analysis of the structure (12 elements) of the fire door. As a result, the effect of core material, adhesive, hinge type, blowing agent, etc. was confirmed in 287 pass cases. On the other hand, it was confirmed that the occurrence of flames and crevices in the 108 cases of failure were the major failure factors in the fire door fire resistance test. Fire doors are composed of composite materials to prevent failure of fire resistance performance, and efficient design and quality control are required through standardization of components.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.3
• /
• pp.188-195
• /
• 2009

Generally. mobile sources of air pollution were classified in on-road and non-road. Due to increased registration number of construction equipment in Korea. updated emission factors for non-road mobile sources, such as construction machinery. should be developed. NONROAD model of U.S. EPA already has introduced transient adjustment factors and sulfur adjustment factors for emission factors of diesel powered engine. In addition to this. European Environment Agency (EEA) has proposed emission factors for off-road machinery including several types of construction equipment. In this study. six types of construction equipment, such as excavator. forklift, loader, crane, roller and bulldozer, were studied to estimate emission factors based on total registration status in Korea. Total 445 construction equipments between 2004 and 2007 model year were tested with KC1-8 mode and air pollutants (CO, THC, $NO_x$, and PM) were measured. After statistical estimation and calculation, emission factors for CO, THC, $NO_x$, and PM for excavator, forklift, loader, crane, roller and bulldozer were provided and compared with previous emission factors. Moreover, updated emission factors for six types of construction equipment in this study were verified after comparison with emission factors of U.S. EPA. Finally, estimated emission amounts of four air pollutants were suggested according to six types of construction equipment.

• Journal of Oral Medicine and Pain
• /
• v.48 no.3
• /
• pp.87-95
• /
• 2023

Purpose: To quantify the relationship between perceived pain intensity and psychological variables in a sample of participants with temporomandibular disorder, with or without central sensitization (CS). Methods: A cross-sectional study with nonprobability convenience sampling was conducted from January 1, 2022, to June 30, 2023. Pain intensity (Numeric Pain Rating Scale), anxiety (State-Trait Anxiety Questionnaire, STAI), catastrophizing (Pain Catastrophizing Scale, PCS), perceived stress (Perceived Stress Scale, PSS), and sleep quality (Pittsburgh Sleep Quality Index, PSQI) were assessed. Statistical analysis was performed using IBM SPSS Statistics for Windows, Version 20.0 (IBM Co.), which included descriptive and normality analyses and the calculation of strength of multiple correlational regression. Results: A total of 52 (n=34 female 65.4%; n=18 male 34.6%) subjects with diagnosis of temporomandibular disorders (TMD) were finally included. A total of 26 participants (n=26, 50.0%) were cases suffered from CS (TMD-CS mean=46.62±11.24) while the remaining participants (n=26, 50.0%) were the controls (TMD-nCS mean=26.77, standard deviation [SD]=8.42). The pain intensity was moderate in both groups TMDCS (mean=7.62, SD=0.83) and TMD-nCS (mean=7.05, SD=0.86), anxiety (TMD-CS STAI mean=53.27, SD=11.54; TMD-nCS STAI mean=49, SD=11.55), catastrophizing (TMD-CS PCS mean=46.27, SD=9.75; TMD-nCS PCS mean=26.69, SD=4.97), perceived stress (TMDCS PSS mean=30.35, SD=4.91; TMD-nCS PSS mean=26.12, SD=6.60) and sleep quality (TMD-CS PSQI mean=15.81, SD=3.65; TMD-nCS PSQI mean=12.77, SD=2.76) levels were measured in both groups. In TMD-CS and TMD-nCS, higher anxiety levels were moderately and significantly associated with greater pain intensity β=0.4467 (t=2.477, p=0.021) and β=0.5087 (t=2.672, p=0.014). Nevertheless, catastrophizing, perceived stress and sleep quality were not associated to pain intensity in neither of group. Conclusions: In both TMD-CS and TMD-nCS patients, elevated anxiety levels were moderately and significantly associated with increased pain intensity. However, heightened levels of pain catastrophizing, perceived stress, and poor sleep quality were not significantly associated with increased pain intensity in either of the two analyzed groups.

• Journal of Home Health Care Nursing
• /
• v.8 no.1
• /
• pp.5-24
• /
• 2001

The purpose of this study was to develop a parenting intervention program and determine the efficacy of the program with low-birth weight infants and their mothers. Nine dyads for the experimental group and twelve dyads for the control group discharged from the Neonatal Intensive Care Unit of a University Hospital in Seoul were recruited for the study. For the intervention group, programmed education and support which focused on the maternal sensitivity of the infant's behavior. rearing environment. motherinfant interaction and infant care were given to each subject. Individual counseling and home visits were provided at discharge, one week after discharge. and one and three months of corrected age in every infant. Structured questionaires were administered and feeding interactions were videotaped and coded by a blinded certified observer. A Quasi-experimental design was conducted for this study. Postpartum depression, maternal self esteem. infant care burden, HOME. mother-infant interaction, and infant development were measured. Results were in favor of the intervention versus the control group. On the Beck depression inventory, intervention mothers showed decreasing trends in depressive symptom vs control mothers although, there were statistically no significant differences between the two groups at each time. The mean score of experimental group was 11.55(mild depression state) at discharge and became 8,6(normal state) at 1 month of corrected age. On the other hand, the mean score of the control group was 13.92(mild depression state) at discharge and became 14.0. Maternal self esteem in both groups improved over time. Infant care burden in both groups was also shown to increase over time. There was a significant difference between the two groups in HOME(p=.0340) at 3 months of corrected age. HOME scores of the experimental group and the control's were 31.10 and 25.58, respectively. Mothers' emotional and language responses were significantly high in the intervention group compared with the control group(p=.0155). Intervention group (53.33) showed a significantly high quality of motherinfant interaction compared with the in control group (42.80)(p =.0340). Intervention group mothers appeared have a better quality of mother-infant interaction behaviors. On the other hand, there was no statistical difference in the infant part between groups. Intervention group infants had higher trends in a general developmental quotient: although, there was no statistical difference between groups. The general developmental quotient of intervention infants was 102.56 and control's was 91.28. However, the developmental quotient of the domain of 'individuality-sociality' was higher in the intervention group infants compared with the control's(p=.0155). The concerns identified by parents revealed two domains of an infants' health management -knowledge and skills in caregiving of lowbirthweight-infants, characteristics of lowbirthweight infants, identifying a developmental milestone, coping with emergency situations and relaxation strategies of mothers from the infant care burden. Interview data with the mothers of low-birth weight infants can be used to develop intervention program contents. Limited intervention time and frequency due to time and cost limitations of this study should be modified. The intervention should be continuously implemented when low-birth weight infants become three years old. An NNNS demonstration appeared to be a very effective intervention for the mothers to improve the quality of mother-infant interactions. Therefore intervening in the mothers of low-birth weight infants as early after delivery as possible is desirable. This study has shown that home visit interventions are worthwhile for mothers only beyond the approach as an essential factor in ability of facilitating a growth fostering environment. In conclusion. the intervention program of this study was very effective in enhancing the parenting for the mothers of low-birth weight infants, resulting in health promotion of low-birth weight infants. The home-visit outreach intervention program of this study will contribute to the health delivery system in this country where there is a lack of continuous follow-up programs for low-birth weight infants after discharge from NICU, if it is activated as part of the home visit programs in community health systems.

• Journal of the Korean Society for information Management
• /
• v.32 no.4
• /
• pp.29-53
• /
• 2015

This study aims to measure the service quality of children's libraries using LibQUAL+ and to analyze the effect of service quality on users' satisfaction. To do that, a survey was conducted with 210 users in three children's libraries located in J city. In three service quality dimensions - 'Affect of Service', 'Information Control', and 'Library as Place' - the users' perceived service level was less than the minimum service level, which implies that the current services should be improved immediately. It was also found that 'Affect of Service' and 'Library as Place' influenced the users' satisfaction. Based on the statistical results and the content analysis of the users' comments about the library services, this study suggests recommendations for improving library services in the children's libraries.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.361-368
• /
• 2021

This study was conducted to analyze the effects of smoking and drinking on quality of life in Adults. The content was analyzed for aged 30 years or older using data from the 7th National Health and Nutrition Survey(2017). The total number of subjects of this study was 5,465. Socio-demographic characteristics, health-related variables and EQ-5D index scores were used for the analysis. Statistical analysis was performed using the IBM SPSS ver.23 program. As a result of the analysis, there were statistically significant differences in smoking status, binge drinking, subjective health status and stress perception with quality of life. In the regression after adjusting the control variables, 'the amount of alcohol consumed at once(β=.106)' was statistically significant. However smoking status and binge drinking were not statistically significant. Therefore, it is necessary to develop Convergence drinking intervention program to improve the quality of life in adults.

• Journal of Korean Traditional Oncology
• /
• v.27 no.1
• /
• pp.25-36
• /
• 2022

The Randomized Control Trial (RCT) is the most well-established and widely used statistical methodology in clinical research; however, applying thorough RCT to cancer patients presents challenges such as ethical concerns, high costs, short clinical periods, and limitations in collecting various side effects. To address this issue, the propensity score matching method, which takes advantage of the benefits of observational research while compensating for the drawbacks of randomized control trials, is used in a variety of fields. In recent years, 28 studies on the effectiveness of Korean medicine on tumors have been conducted abroad using the Propensity Score Matching Method, but none have been conducted in Korea. The majority of studies have focused on liver cancer, colon cancer, lung cancer, and stomach cancer, with endpoints such as survival time, incidence rate, quality of life, and treatment outcomes revealing statistical differences in how Korean medicine intervention affects treatment outcomes. As a result, well-established studies using the propensity matching score methodology should be useful in evaluating the impact of Korean medicine in oncology treatments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.287-294
• /
• 2013

The roll-to-roll (R2R) printed electronics system is one of the most promising technologies for the printed electronics industry because of several advantages in terms of productivity and cost. In the R2R printed electronics system, the characteristics of the printed patterns are an important issue that determines the functional quality of the printed matter. This study analyzed how several main factors may affect the characteristics of printed patterns, especially the thickness and surface roughness. The statistical model for estimation of the printed pattern was developed as a function of the main factors using the design of experiment (DOE) methodology. Based on the statistical analysis results, the R2R printed electronics system can be designed to control the characteristics of printed patterns.