• Journal of the Korean Statistical Society
• /
• 제20권2호
• /
• pp.147-155
• /
• 1991

This paper treats a robust design criterion which minimizes the effects of outliers and model inadequacy, and investigates robust designs for some response surface designs. In order to develop a robust design criterion and robust design, the integrated mean squared error of *(equation omitted) over a region is utilized, where *(equation omitted). is the estimated response by the minimum bias estimation proposed by carson, Manson and Hader (1969) . According to the number of aberrant observations and their positions, the proposed criterion and designs are studied. Also further development of the proposed criterion is treated when outliers can occur in any position of a design.

• Journal of the Korean Statistical Society
• /
• 제17권2호
• /
• pp.134-145
• /
• 1988

The basic conditions for a parallel-flats fraction to be a search design of Resolution III.2 have been developed in Um (1980, 1981, 1983, 1984). In this paper, a series of resolution III.2 search designs for $3^n, n=4, 5, 6$, are presented.

• Communications for Statistical Applications and Methods
• /
• 제6권1호
• /
• pp.159-168
• /
• 1999

We introduce a new conditional signed-rank test for the tree alternatives comparing several treatments with a control in the randomized block design. We demonstrate its performance by comparing with 3 classes of signed-rank tests proposed by Park et al.(1991) in some general situations. In most cases the proposed procedure is simpler to compute and has better power than others.

• International Journal of Quality Innovation
• /
• 제7권3호
• /
• pp.107-115
• /
• 2006

Control charts are important tools of statistical quality control. In 1956, Duncan first proposed the economic design of $\bar{x}-control$ charts to control normal process means and insure that the economic design control chart actually has a lower cost, compared with a Shewhart control chart. An moving average (MA) control chart is more effective than a Shewhart control chart in detecting small process shifts and is considered by some to be simpler to implement than the CUSUM. An economic design of MA control chart has also been proposed in 2005. The weaknesses to only the economic design are poor statistics because it dose not consider type I or type II errors and average time to signal when selecting design parameters for control chart. This paper provides a construction of an economic-statistical model to determine the optimal parameters of an MA control chart to improve economic design. A numerical example is employed to demonstrate the model's working and its sensitivity analysis is also provided.

• International Journal of Quality Innovation
• /
• 제10권1호
• /
• pp.89-105
• /
• 2009

This study aims to probe into the influence of new product design and new product development process management on development performance. The research finding demonstrates that product design reveals positive and significant influence on new product development performance. Through statistical analysis, this study finds that companies in Taiwan value new product design. When companies value it more, they tend to have better new product development performance. With regard to the relation between new product development process management and new product development performance, the empirical results demonstrate that companies would pay more attention on new product development process management. With regard to new product idea and assessment, concept design and development, product function test and mass production in the market, through statistical analysis, this study finds that companies that value process management of new product development tend to have better new product development performance. As to the influence of new product design and new product process management on new product development performance, statistical analysis result demonstrates that the integration between new product design valued by companies in Taiwan and development process management would lead to significantly positive influence on new product development performance of the companies.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.87-98
• /
• 2005

This research investigates economic-statistical characteristics of variable sampling size and interval (VSSI)$\bar{X}$charts under two assignable causes. A Markov chain approach is employed in order to calculate average run length (ARL) and average time to signal (ATS). Six transient states are derived by carefully defining the state. A steady state cost rate function is constructed based on Lorenzen and Vance(1986) model. The cost rate function is optimized with respect to six design parameters for designing the VSSI $\bar{X}$ charts. Computational experiments show that the VSSI $\bar{X}$ chart is superior to the Shewhart $\bar{X}$ chart in the economic-statistical sense, even under two assignable causes. A comparative study shows that the cost rate may increase up to almost 30% by overlooking the second cause. Critical input parameters are also derived from a sensitivity study and a few guideline graphs are provided for determining the design parameters.

• Transactions on Electrical and Electronic Materials
• /
• 제10권5호
• /
• pp.177-181
• /
• 2009

Employing statistical design of experiments, we have performed studies on the characterization of electrodes using $TiO_2$ and process variables in the fabrication process of nanocrystalline dye sensitized solar cell. Systematic experiment to identify the effects of process variables on cell's efficiency has based on broad-band absorption of light by tailor made organometallic dye molecules dispersed on a high surface of $TiO_2$. Employing statistical design of experiment on $TiO_2$ photoelectrode forming process, structural characterization of electrodes and process variable have been investigated. Through the statistical analysis we have found that the particle size of $TiO_2$ and the amount of PEG/PEO are significantly affecting on the cell efficiency. In addition, a significant amount of interaction exists between the particle size and the amount of PEG/PEO.

• 한국해양바이오학회지
• /
• 제6권1호
• /
• pp.31-40
• /
• 2014

The production of astaxanthin in the microalga Haematococcus pluvialis has been investigated using a sequential methodology based on the application of two types of statistical designs. The employed preliminary experiment was a fractional factorial design $2^6$ in which the factors studied were: excessive irradiance and nitrate starvation, phosphate deficiency, acetate supplementation, salt stress, and elevated temperature. The experimental results indicate that the amount of astaxanthin accumulation in the cells can be enhanced by excessive irradiance and nitrate starvation whereas the other factors tested did not yield any enhancement. In the subsequent experiment, a central composite design was applied with four variables, light intensity, nitrate, phosphate, and acetate, at five levels each. The optimal conditions for the highest astaxanthin production were found to be $1040{\mu}E/(m^2{\cdot}s)$ light intensity, 0.04 g/L nitrate, 0.31 g/L phosphate, 0.05 g/L acetate concentration.

• International Journal of Quality Innovation
• /
• 제3권2호
• /
• pp.13-28
• /
• 2002

Higher efficiency and effectiveness of Research & Development phases can be attained using advanced statistical methodologies. In this work statistical methodologies are combined with a deterministic approach to engineering design. In order to show the potentiality of such integration, a simple but effective example is presented. It concerns the problem of optimising the performances of a paper helicopter. The design of this simple device is not new in quality engineering literature and has been mainly used for educational purposes. Taking full advantage of fundamental engineering knowledge, an aerodynamic model is originally formulated in order to describe the flight of the helicopter. Screening experiments were necessary to get first estimates of model parameters. Subsequently, deterministic evaluations based on this model were necessary to set up further experimental phases needed to search (or a better design. Thanks to this integration of statistical and deterministic phases, a significant performance improvement is obtained. Moreover, the engineering knowledge かms out to be developed since an explanation of the “why” of better performances, although approximate, is achieved. The final design solution is robust in a broader sense, being both validated by experimental evidence and closely examined by engineering knowledge.

• Nuclear Engineering and Technology
• /
• 제16권3호
• /
• pp.155-160
• /
• 1984

표준 핵연료집합체나 최적 핵연료집합체로 구성된 원자력 1호기 원자로심의 열적여유도를 기존 열설계 방법과 통계적 열설계 방법을 이용하여 분석하였다. 통계적 열설계 방법은 노심내 운전변수들의 불확실도를 통계적으로 처리함으로써 기존 방법에 비하여 열적여유도를 증가시킨다. 계산을 위하여 정상상태와 과도시 열수력분석 전산코드인 COBRA-IV-i를 사용하였다. 계산결과 통계적 설계방법은 열적여유도를 크게 증가시키며, 표준 핵 연료집 합체는 물론 최적 핵 연료집 합체가 장전된 원자력 1호기의 열설계기준을 만족시키는 것으로 밝혀졌다. 그러나 기존 열설계 방법은 원자력 1호기 노심에 최적 핵연료집합체가 장전된 경우 열설계기준을 만족시키지 못하는 것으로 밝혀졌다.