• The Korean Journal of Applied Statistics
• /
• v.35 no.6
• /
• pp.725-737
• /
• 2022

In the standard assumption of statistical process monitoring (SPM) under consideration, the in-control region of the control parameter of quality characteristic consists of a single point. However, if small deviations from the ideal situation may not be of practical importance, the parametric space can consist of three regions: In-control, indifference, and out-of-control. In this paper, we propose two exponentially weighted moving average (EWMA) charting procedures applicable to the situation with three parameter regions, and compare the efficiency of the proposed procedures with the Shewhart chart and the cumulative sum (CUSUM) chart.

• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.7-12
• /
• 2001

Real time monitoring has become critical as the use of laser welding increases. Plasma and spatter are measured and used as the signal for estimating weld quality. The estimating algorithm was made using the fuzzy pattern recognition with the area of data that is beyond the tolerance boundary. Also, an algorithm that detects the spatter and the localized defect was created in order to kd the partially produced pit and the sudden loss of weld penetration. These algorithms were used in quality monitoring of the $CO_2$ laser tailored blank weld. Statistical program that can display the laser weld quality result and the signal transition was made for the first stage of the remote control system.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.233-247
• /
• 2008

Process monitoring technology is able to detect the faults and the process changes which occur in a process unpredictably, which makes it possible to find the reasons of the faults and get rid of them, resulting in a stable process operation, high-quality product. Statistical process monitoring method based on data set has a main merit to be a tool which can easily supervise a process with the statistics and can be used in the analysis of process data if a high quality of data is given. Because a real process has the inherent characteristics of nonlinearity, non-Gaussianity, multiple operation modes, sensor faults and process changes, however, the conventional multivariate statistical process monitoring method results in inefficient results, the degradation of the supervision performances, or often unreliable monitoring results. Because the conventional methods are not easy to properly supervise the process due to their disadvantages, several advanced monitoring methods are developed recently. This review introduces the theories and application results of several remarkable monitoring methods, which are a nonlinear monitoring with kernel principle component analysis (KPCA), an adaptive model for process change, a mixture model for multiple operation modes and a sensor fault detection and reconstruction, in order to tackle the weak points of the conventional methods.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.217-236
• /
• 1999

Engineering process control (EPC) is one of the techniques very widely used in process. EPC is based on control theory which aims at keeping the process on target. Statistical process control (SPC), also known as statistical process monitoring. The main purpose of SPC is to look for assignable causes (variability) in the process data. The combined SPC/EPC scheme is gaining recognition in the process industries where the process frequently experiences a drifting mean. This paper aims to study the difference between SPC and EPC in simple terms and presents a case study that demonstrates successful integration of SPC and EPC for a product in drifting industry. Statistical process control (SPC) monitoring of the special causes of a process, along with engineering feedback control such as proportional-integral-derivative (PID) control, is a major tool for on-line quality improvement.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1271-1277
• /
• 2018

This paper deals with a voltage sag assessment based on a voltage monitoring program. The voltage sag performance at a specific site can be evaluated by analyzing voltage monitoring data recorded for a long time period. Although an assessment based on voltage monitoring is an effective way to understand voltage sag performance at a measurement site, the statistical confidence of voltage sag frequency estimation heavily depends on the length of monitoring period and the number of recorded events. Short monitoring period and insufficient recorded data can not provide a reliable assessment result. This paper proposes a compensation assessment method by combining a computer simulation approach for in case that monitoring period and data are not enough for a valid assessment.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.87-92
• /
• 2004

This paper presents several control charts for safety and environmental performance monitoring. We also propose guidelines that control charts for statistical process control can be used for safety and environmental performance evaluation.

• Proceedings of the Korean Statistical Society Conference
• /
• 2004.11a
• /
• pp.165-170
• /
• 2004

This paper will derive explicit unified pricing formulas for eight types of outside barrier options, respectively. The monitoring periods of these options start at an arbitrary date and end at another arbitrary date before maturity. The eight types of barrier options are up-and-in, up-and-out, down-and-in and down-and-out call (or put) options.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.2
• /
• pp.119-127
• /
• 2004

Butterfly valves are popularly used in service in the industrial and water works pipeline systems with large diameter because of its lightweight, simple structure and the rapidity of its manipulation. Sometimes cavitation can occur. resulting in noise, vibration and rapid deterioration of the valve trim, and do not allow further operation. Thus, the monitoring of cavitation is of economic interest and is very importance in industry. This paper proposes a condition monitoring scheme using statistical feature evaluation and support vector machine (SVM) to detect the cavitation conditions of butterfly valve which used as a flow control valve at the pumping stations. The stationary features of vibration signals are extracted from statistical moments. The SVMs are trained, and then classify normal and cavitation conditions of control valves. The SVMs with the reorganized feature vectors can distinguish the class of the untrained and untested data. The classification validity of this method is examined by various signals that are acquired from butterfly valves in the pumping stations and compared the classification success rate with those of self-organizing feature map neural network.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.1
• /
• pp.9-17
• /
• 2013

Government ministries operate various system dealing with filed civil appeals. There are representative systems such as Safety Monitoring System of the Ministry of Public Administration and Security (MOPAS), Disaster Premonitory Information System of the National Emergency Management Agency (NEMA), Facilities Hazard Information System of the Ministry of Land, Transportation and Maritime Affairs (MLTM), Environmantal Monitoring System of the Ministry of Environment (ME). The purpose managing these systems is to reduce casualties and to improve safety by preventing disasters and accidents in local communities. This study suggests the method to effectively operate a safety monitoring system which fits to local situations based on the statistical analysis performed on filed complaint cases in Gangdong-gu as a sample region. The cases has been collected since 2012 through the voluntary safety monitoring activity of a specialist who had finished the Emergency and Safety maneger's master course.

• Structural Monitoring and Maintenance
• /
• v.1 no.3
• /
• pp.249-271
• /
• 2014

This paper presents a unique study of Structural Health Monitoring (SHM) for the maintenance decision making about a real life movable bridge. The mechanical components of movable bridges are maintained on a scheduled basis. However, it is desired to have a condition-based maintenance by taking advantage of SHM. The main objective is to track the operation of a gearbox and a rack-pinion/open gear assembly, which are critical parts of bascule type movable bridges. Maintenance needs that may lead to major damage to these components needs to be identified and diagnosed timely since an early detection of faults may help avoid unexpected bridge closures or costly repairs. The fault prediction of the gearbox and rack-pinion/open gear is carried out using two types of Artificial Neural Networks (ANNs): 1) Multi-Layer Perceptron Neural Networks (MLP-NNs) and 2) Fuzzy Neural Networks (FNNs). Monitoring data is collected during regular opening and closing of the bridge as well as during artificially induced reversible damage conditions. Several statistical parameters are extracted from the time-domain vibration signals as characteristic features to be fed to the ANNs for constructing the MLP-NNs and FNNs independently. The required training and testing sets are obtained by processing the acceleration data for both damaged and undamaged condition of the aforementioned mechanical components. The performances of the developed ANNs are first evaluated using unseen test sets. Second, the selected networks are used for long-term condition evaluation of the rack-pinion/open gear of the movable bridge. It is shown that the vibration monitoring data with selected statistical parameters and particular network architectures give successful results to predict the undamaged and damaged condition of the bridge. It is also observed that the MLP-NNs performed better than the FNNs in the presented case. The successful results indicate that ANNs are promising tools for maintenance monitoring of movable bridge components and it is also shown that the ANN results can be employed in simple approach for day-to-day operation and maintenance of movable bridges.