• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.39-40
• /
• 2018

The goal of site layout planning(SLP) is to maximize the productivity and efficiency of the construction by reducing travel distance and material handling cost and manpower. However, SLPs are static layout schemes, which cannot be reorganized during the construction process to correspond with errors, phase transition, changing working environments on the site. To solve this problem, researches on dynamic site layout planning(DSLP) are emerging. This preliminary study clarifies characteristics of temporary facility's variables to develop the vertical DSLP algorithm of high-rise building construction.

• Journal of Communications and Networks
• /
• 제7권2호
• /
• pp.126-134
• /
• 2005

Reducing energy consumption in mobile hosts (MHs) is one of the most critical issues in wireles/mobile networks. IP paging protocol at network layer and power saving mechanism (PSM) at link layer are two core technologies to reduce the energy consumption of MHs. First, we investigate the energy efficiency of the current IEEE 802.11 power saving mechanism (PSM) when IP paging protocol is deployed over IEEE 802.11 networks. The result reveal that the current IEEE 802.11 PSM with a fixed wakeup interval (i.e., the static PSM) exhibits a degraded performance when it is integrated with IP paging protocol. Therefore, we propose an adaptive power saving mechanism in IEEE 802.11-based wireless IP networks. Unlike the static PSM, the adaptive PSM adjusts the wake-up interval adaptively depending on the session activity at IP layer. Specifically, the MH estimates the idle periods for incoming sessions based on the exponentially weighted moving average (EWMA) scheme and sets its wake-up interval dynamically by considering the estimated idle period and paging delay bound. For performance evaluation, we have conducted comprehensive simulations and compared the total cost and energy consumption, which are incurred in IP paging protocol in conjunction with various power saving mechanisms: The static PSM, the adaptive PSM, and the optimum PSM. Simulation results show that the adaptive PSM provides a closer performance to the optimum PSM than the static PSM.

• 한국인터넷방송통신학회논문지
• /
• 제9권4호
• /
• pp.87-97
• /
• 2009

A Mobile Ad hoc Network (MANET) is characterized by multi-hop wireless connectivity, frequently changing network topology with mobile nodes and the efficiency of the dynamic routing protocol plays an important role in the performance of the network. In this paper, the performance of five routing protocols for MANET is compared by using OPNET modeler: AODV, DSR, GRP, OLSR and TORA. The various performance metrics are examined, such as packet delivery ratio, end-to-end delay and routing overhead with varying data traffic, number of nodes and mobility. In our simulation results, OLSR shows the best performance in terms of data delivery ratio in static networks, while AODV has the best performance in mobile networks with moderate data traffic. When comparing proactive protocols (OLSR, GRP) and reactive protocols (AODV, DSR) with varying data traffic in the static networks, proactive protocols consistently presents almost constant overhead while the reactive protocols show a sharp increase to some extent. When comparing each of proactive protocols in static and mobile networks, OLSR is better than GRP in the delivery ratio while overhead is more. As for reactive protocols, DSR outperforms AODV under the moderate data traffic in static networks because it exploits caching aggressively and maintains multiple routes per destination. However, this advantage turns into disadvantage in high mobility networks since the chance of the cached routes becoming stale increases.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.165-176
• /
• 2021

Existing research on confined concrete filled steel tubular (CCFT) columns has been mainly focused on static or cyclic loading. In this paper, square section CCFT and CFT columns were tested under both static and impact loading, using a 10,000 kN capacity compression test machine and a drop weight testing equipment. Research parameters included bonded and unbonded fiber reinforced polymer (FRP) wraps, with carbon, basalt and glass FRPs (or CFRP, BFRP, and GFRP), respectively. Time history curves for impact force and steel strain observed are discussed in detail. Experimental results show that the failure modes of specimens under impact testing were characterized by local buckling of the steel tube and cracking at the corners, for both CCFT and CFT columns, similar to those under static loading. For both static and impact loading, the FRP wraps could improve the behavior and increase the loading capacity. To analyze the dynamic behavior of the composite columns, a finite element, FE, model was established in LS-DYNA. A simplified method that is compared favorably with test results is also proposed to predict the impact load capacity of square CCFT columns.

• 한국통신학회논문지
• /
• 제40권12호
• /
• pp.2539-2548
• /
• 2015

이종 셀룰러 네트워크 환경에서 셀 간 간섭 문제와 부족한 주파수자원 환경을 극복하는 것은 통신 성능을 향상시키기 위한 주요 방법 중 하나이다. 정적 주파수 재사용 방식은 한정된 주파수 자원 환경에서 셀 간 간섭 문제를 효율적으로 해결하기 위해 제안된 방식이다. 이러한 방식은 미리 정해진 파워와 대역으로 주파수를 할당하기 때문에 네트워크의 통신 성능향상에 제한이 있다. 또한 기존의 동적 주파수 재사용 방식들은 대부분의 경우 셀 안에 존재할 수 있는 스몰 셀 환경을 고려하지 않고 있고, 네트워크의 트래픽 부하기 심하고 불균일한 환경에 특화되어 있지 않다. 제안한 동적 주파수 재사용 기법은 다중 이종 셀룰러 네트워크 환경에서 네트워크 환경에 적응하여 각 셀의 트래픽 비율에 알맞게 동적으로 주파수를 할당한다. 제안한 기법은 먼저 각 셀 Edge의 PRB 사용량을 수집하고 이에 적응하여 스몰 셀을 제외한 전 셀 지역에 주파수를 재 할당한다. 그 후 이를 고려하여 스몰 셀을 위한 주파수를 할당하고 이를 반복하여 전체 셀의 주파수 자원을 할당한다. 해당 기법은 네트워크의 트래픽 부하가 심하고 불균일할 때 스몰 셀 환경을 위해 각 셀의 트래픽 부하에 적합한 주파수 자원을 할당시킴으로써, 기존의 방식에 비해 Spectral Efficiency 성능을 향상시켜 결과적으로 시스템의 Throughput 성능을 향상시킨다.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1055-1075
• /
• 2015

In order to investigate the accuracy and applicability of steel equivalent constitutive model, the calculated results were compared with typical tests of steel frames under static and dynamic loading patterns firstly. Secondly, four widely used models for time history analysis of steel frames were compared to discuss the applicability and efficiency of different methods, including shell element model, multi-scale model, equivalent constitutive model (ECM) and traditional beam element model (especially bilinear model). Four-story steel frame models of above-mentioned finite element methods were established. The structural deformation, failure modes and the computational efficiency of different models were compared. Finally, the equivalent constitutive model was applied in seismic incremental dynamic analysis of a ten-floor steel frame and compared with the cyclic hardening model without considering damage and degradation. Meanwhile, the effects of damage and degradation on the seismic performance of steel frame were discussed in depth. The analysis results showed that: damages would lead to larger deformations. Therefore, when the calculated results of steel structures subjected to rare earthquake without considering damage were close to the collapse limit, the actual story drift of structure might already exceed the limit, leading to a certain security risk. ECM could simulate the damage and degradation behaviors of steel structures more accurately, and improve the calculation accuracy of traditional beam element model with acceptable computational efficiency.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.657-668
• /
• 2020

This paper investigates the effect of market structure, including some bank-specific variables and macroeconomic conditions, on the profitability of Indonesian Islamic rural banks. We apply the structure conduct performance (SCP) and the relative market power (RMP) hypothesis. Panel data comprising 142 Islamic rural banks from 2013Q1 to 2018Q4 are employed. This study breaks them apart, associated with the level of economic development consisting of Java as developed regions and outside Java as less developed regions. This study employs static and dynamic panel regression. The GMM method, however, is appropriate because of the dynamic nature of profitability. Our results confirm the SCP hypothesis and fail to support the RMP hypothesis. The higher market concentration allows Islamic rural banks to generate a significantly higher profit by conducting a collusive strategy. More interestingly, the collusive behavior may result in more profit for Islamic rural banks located in the developed regions than those in less developed regions. Evidence also highlights the importance of operating efficiency and impaired financing on profitability. High operating efficiency and low impaired financing can improve profit. Our results suggest that capitalizing market share by improving efficiency and optimizing financing contracts between PLS and non-PLS contracts also improve profit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.36-38
• /
• 2003

This paper shows a characteristics analysis of Switched Reluctance Motor(SRM) for design optimization. The static and dynamic characteristics are analysised by simulation case of 6/4 and 12/8pole machine. The torque, efficiency and acoustic noise are tested to compare drive performances.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.272-276
• /
• 1993

We made to develop CNC Tool Grinding Machine automating the linear motion of X,Y,Z axis of table, and thetilting and rotation of tool holding vice by using Encorder to increase the efficiency of tool grinding for the Conventional Tool Grinding Machine. We did not consider the part of static, dynamic and thermal behavior that must necessary consider when wedesign, because we used existing Conventional Tool Grinding Machine as it is. We investigated simulation to make existing Conventional Tool Grinding Machine like CNC. We also designed it, and we compared the capability of existing Conventional Tool Grinding and CNC Tool Grinding Machine, and we investigated, too.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.182-185
• /
• 2004

This paper shows a characteristics analysis of Switched Reluctance Motor(SRM) for design optimization. The static and dynamic characteristics are analyzed by simulation case of 6/4 and 12/8 pole machine. The torque, efficiency and acoustic noise are tested to compare drive performances.