• 한국병원경영학회지
• /
• 제15권1호
• /
• pp.27-48
• /
• 2010

The purpose of this paper is to analyze the efficiency change and its determinants of the regional public hospitals. We utilize 34 regional public hospital's panel data for 6 years from 2003 to 2008. We use DEA(Data Envelopment Analysis)-CCR, BCC model, DEA/Window model, and DEA Profiling. The empirical results show the following findings. First, technical efficiency shows that approximately 3.6% of inefficiency exists on the regional public hospitals and it reveals that the cause for technical inefficiency is due to scale inefficiency. Second, DEA/Window results show that the stable dissimilarity by standard deviation, LDP of CCR. Third, the results of partial efficiency by DEA Profiling show that increase efficiency depends on the number of beds, doctors, and nurses.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(A)
• /
• pp.361-364
• /
• 2011

Nowadays, an explosive increase of mobile devices has triggered a lot of research into radio resource management. Therefore, many studies have been done and still underway to use this limited resource efficiently. However, most of the existing studies focused on efficiency in mac layer. In this paper, I proposed a timer to manage radio resource, which refreshes the timer's values based on the number of connections dynamically. This dynamic timer enables Base Station (BS) to be able to manage available radio resources efficiently and accommodate much more Mobile Stations (MSs). Simulation result showed that BS with dynamic timer could accommodate the MS about 30% more, compared with BS with a static timer in terms of radio resource management. Dynamic timer is not restricted to any specific network standard. So its mechanism is practical and implementable without changing the original standard, which can contribute to service providers by increasing capability that BS can support.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.71-74
• /
• 2002

A higher-order zig-zag theory is developed to refine the predictions of natural frequency and mode shape of laminated composite plates with multiple delaminations. By imposing top and bottom surface transverse shear stress-free and interface continuity conditions of transverse shear stresses including delaminated interfaces, the displacement field with minimal degree-of-freedoms are obtained. This displacement field can systematically handle the number, shape, size, and locations of delaminations. Through the dynamic version of variational approach, the dynamic equilibriums and variationally consistent boundary conditions are obtained. Through the numerical example of natural frequency analysis, the accuracy and efficiency of present theory are demonstrated. The present theory is suitable as an efficient tool to analyze the static and dynamic behavior of the composite plates with multiple delaminations.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.15.1-21
• /
• 1999

Radiosity method is a global illumination model for image synthesis. It computes all energy interactions among diffuse elements in a virtual environment. One of the major drawbacks if its time consuming computation. Existing radiosity algorithms for static scene is difficult to be applicable to dynamic environments. In this paper we proposed an hierarchical scene partition scheme to speedup the link update computations in the dynamic environments. Since the proposed spatial data structure is global, it not only can be used to speedup the culling of non-affected links after geometry change, but also can be used to accelerate the subsequent visibility computation. Several empirical tests are given to show the efficiency of our improved algorithm.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.377-382
• /
• 2005

본 연구에서는 이송장비의 조별운행방식과 Pooling 운행방식에 따른 컨테이너 터미널의 하역시스템 생산성을 비교분석하였다. 기존 컨테이너 터미널에서는 다수의 이송장비가 1개조로 구성되어 하나의 컨테이너 크레인(C/C)에 대해서만 양 ${\cdot}$ 적하작업을 지원하는 고정할당방식을 채택하고 있다. 이러한 할당방식은 하역작업시 혼선이 적고 차량이 일괄적 운행경로를 가지므로 지금까지 매우 광범위하게 적용되어 왔다. 그러나, 각기 다른 조에 편성된 이송장비간에는 상호지원을 하지 않기 때문에 이송장비의 작업융통성이 떨어진다고 볼 수 있다. 이에 비해 본 연구에서는 이송장비의 작업조를 편성하지 않고 투입된 모든 이송장비가 자유롭게 다수의 C/C에 대한 이송작업을 지원할 수 있는 4가지의 동적할당기법을 제시한다. 제시된 4가지의 동적할당은 차량할당시에 C/C의 순번(Se), 대기시간(Qt), 생산성(Pr), 차량할당수(Nv), 버퍼수(Nb)를 고려하는 것으로 연구결과에서 C/C의 현재대기시간, 할당수, 버퍼수를 동시에 고려한 동적할당방식이 가장 효율적이였고, 그 다음으로 할당순서에 기준한 방식이 우수한 결과를 보였다. 그러나, C/C의 현재생산성이나 대기시간만을 고려한 할당방식은 상대적으로 고정할당방식보다 낮은 효율성을 보이는 것으로 나타났다.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.44-50
• /
• 2010

Structural vibration is a significant problem in many multi-part or multi-component assemblies. In aircraft industry, structures are composed of various fasteners, such as bolts, snap, hinge, weld or other fastener or connector (collectively "fasteners"). Due to these, prediction and design involving dynamic characteristics is quite complicated. However, the current state of the art does not provide an analytical tool to effectively predict structure's dynamic characteristics, because consideration of structural uncertainties (i.e. material properties, geometric tolerance, dimensional tolerance, environment and so on) is difficult and very small fasteners in the structure cause a huge amount of analysis time to predict dynamic characteristics using the FEM (finite element method). In this study, to resolve the current state of the art, a new approach is proposed using the FEM and probabilistic analysis. Firstly, equivalent elements are developed using simple element (e.g. bar, beam, mass) to replace fasteners' finite element model. Developed equivalent elements enable to explain static behavior and dynamic behavior of the structure. Secondly, probabilistic analysis is applied to evaluate the PDF (probability density function) of dynamic characteristics due to tolerance, material properties and so on. MCS (Monte-Carlo simulation) is employed for this. Proposed methodology offers efficiency of dynamic analysis and reality of the field as well. Simple plates joined by fasteners are taken as an example to illustrate the proposed method.

• 한국항만경제학회지
• /
• 제27권1호
• /
• pp.213-234
• /
• 2011

최근까지 해운산업은 글로벌금융위기에 따른 컨테이너물동량 감소, 선복과잉 등 악재가 거듭되어 일부 선사는 유동성 위기까지 겪어 왔으며, 대형선사의 초대형컨테이너선의 경쟁적인 발주에 기인한 해운시황 악화의 우려가 심화되고 있는 상황이다. 이러한 해운산업의 악조건 속에서 효율적인 기업운영을 하기 위해서는 기업의 효율성 측정이 반드시 필요하다. 최근 해운산업의 효율성에 관련된 연구는 컨테이너항만 및 터미널효율성 측정에 관련된 연구가 다수 이뤄져왔으며, 해운선사 및 물류기업에 대한 효율성 측정에 대한 연구는 미진하였다. 본 연구는 DEA분석방법 중 CCR-O/BCC-O, Window분석을 활용하여 글로벌해운선사에 대한 재무성과효율성(EFP)과 컨테이너화물취급 운영성과효율성(EOP)을 정태적 동태적 분석으로 구분하였으며, 현재 해운산업 위기 극복을 위한 전략 및 계획수립관점에서 효율성을 분석했다. 효율성측정 변수들 간에는 정(+)의 상관관계가 나타났다. 정태적 분석(2007년)에서 재무성과효율성(EFP)은 APL, COSCO이 가장 재무적으로 효율적인 경영활동을 하고 있는 것으로 분석되었으며, 운영성과효율성(EOP)은 CSCL이 가장 높은 운영성과효율성을 기록하였다. 동태적 분석(2004~2007년)에서 재무성과효율성이 가장 높은 선사는 APL이며, 운영성과 효율성은 HMM, OOCL이 높은 것으로 나타났다. 해운기업의 효율성을 회복시키기 위해서는 선복량 조정을 통한 해상운임의 회복이 필요한 것으로 분석되었다. 또한 본 연구에서는 글로벌해운기업의 경쟁력 평가의 기초자료 제공, 비효율성의 원인 및 특정요인 도출 등을 통해 가장 효율적인 글로벌해운기업을 선정하여 비효율적인 기업을 위한 벤치마킹 정보도 제공하였다.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.72-77
• /
• 2011

Dynamic Line Rating (DLR) techniques have been greatly worthy of notice for efficiently increasing transmission capacity as well as controlling load-flow in overhead transmission lines, in comparison with the existing power system operating with Static Line Rating (SLR). This paper describes an utilization method to implement DLR control system for old transmission lines built in the first stage using the ground clearance design standard with lower dips. The suggested DLR system is focused on designing as temperature control system rather than current/load control system. Based on several performance for conductor temperatures, it is shown that DLR system with efficiency can be implemented.

• Journal of Communications and Networks
• /
• 제3권4호
• /
• pp.307-316
• /
• 2001

Two hard sub-problems have emerged relating to the use of mobile agents for service management tasks. First, what is their impact on security, and second, how can they receive a flexible capacity to adapt to an open range of different environments on demand, without introducing trio stringent prior assumptions. In this paper, we present work towards solving the second problem, which is of particular interest to management software, because it typically needs to excert fine-grained and therefore particular resource control. We suggest a mechanism that reassembles mobile agents from smaller sub-components during arrival at each hop. The process incorporates patterns of unmutable and mutable sub-components, and is informed by the conditions of each local environment. We discuss different kinds of software adaptation and draw a distinction between static and continuous forms. Our software prototype for dynamic adaptation provides a concept far exchanging environment-dependent implementations of mobile agents during runtime. Dynamic adaptation enhances efficiency of mobile code in terms of bandwidth usage and scalability.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.63-68
• /
• 1999

Because misaligned shafts have caused noise, vibration, bearing failures, and stress concentration of coupling part, which decrease the efficiency and life of a shaft system, the proper alignment of shaft system should be monitored continuously in dynamic condition. To solve these problems under dynamic condition, a telemetry system is this study is used to find the condition of the least bending moment, which is known by analyzing the structure and stress induced by misalignment is investigated. The moment derived from two shaft strain at the nearby coupling is measured. The bending strain is measured 5 times for average in static state as well as dynamic state with 100~700 rpm.