• Smart Structures and Systems
• /
• 제14권4호
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

• 한국통신학회논문지
• /
• 제29권8C호
• /
• pp.1055-1061
• /
• 2004

본 논문에서는 H.264/AVC 엔트로피 부호화 방식에서 다중 부호어를 이용한 효율적인 동적 부호화 방법을 제안한다. H.264/AVC에서 사용된 Exp-Golomb 부호어는 정적 확률 분포 특성 때문에 (7)에서 제시한 일원화 구문요소의 심볼 분포를 충분히 반영하지 못한다. 그러나 본 논문에서 제시한 다중 부호어 들은 다양한 통계적 특성을 나타낸다. 따라서 주어진 동영상에 따라 일원화 구문 요소를 부호화하기 위해 다중 부호어 들을 선택적으로 사용하는 동적 부호화 방법이 제안된다. 실험 결과에서는 제안한 방식이 (7)방식에 비해 화질의 열화 없이 압축 효율의 우수성을 보여준다.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.126-132
• /
• 2002

Misaligned shafts of the rotating machinery have caused noise, vibration. bearing failures, and stress concentration of coupling parts which decrease the efficiency and life of shaft systems. Therefore the proper shaft alignment of those system should be monitored continuously in dynamic condition. To solve these problems under dynamic condition a telemetry system is used. In this study, the condition of the least bending moment which is known by analyzing the structure and stress induced by misalignment is found. After the shaft is aligned by dial gage, a telemetry system with strain gages is installed on shaft. The relationship between bearing displacement and moment of coupling part influenced by misalignment is investigated. The moment derived from two shaft strain at the nearby coupling is measured. The bending strain is measured 5 times for average in static state as well as in dynamic state with 100∼700 rpm.

• Structural Engineering and Mechanics
• /
• 제72권5호
• /
• pp.557-568
• /
• 2019

Accurate modeling of contact interface in bolted joints is crucial in predicting the dynamic behavior for bolted assemblies under external load. This paper presents a contact pressure distribution based non-uniform virtual material method to describe the joint interface of assembly structure, which is connected by sparsely distributed multi-bolts. Firstly, the contact pressure distribution of bolted joints is obtained by the nonlinear static analysis in the finite element software ANSYS. The contact surface around bolt hole is divided into several sub-layers, and contact pressure in each sub-layer is thought to be evenly. Then, considering multi-asperity contact at the micro perspective, the relationship between contact pressure and interfacial virtual material parameters for each sub-layer is established by using the fractal contact theory. Finally, an experimental platform for the dynamic characteristics testing of a beam lap structure with double-bolted joint is constructed to validate the efficiency of proposed method. It is found that the theoretical results are in good agreement with experimental results by impact response in both time- and frequency-domain, and the relative errors of the first four natural frequencies are less than 1%. Furthermore, the presented model is used to examine the effect of rough contact surface on dynamic characteristics of bolted joint.

• 한국통신학회논문지
• /
• 제29권9C호
• /
• pp.1244-1251
• /
• 2004

본 논문에서는 H.264/AVC 엔트로피 부호화 방식에서 다중 부호어를 이용한 효율적인 동적 부호화 방법을 제안한다. H.264/AVC 에서 사용된 Exp-Golomb 부호어는 정적 확률 분포 특성 때문에 [7]에서 제시한 일원화 구문요소의 심볼 분포를 충분히 반영하지 못 한다. 그러나 본 논문에서 제시한 다중 부호어들은 다양한 통계적 특성을 나다낸다. 따라서 주어진 동영상에 따라 일원화 구문 요소를 부호화하가 위해 다중 부호어들을 선택적으로 사용하는 통적 부호화 방법이 제안된다. 실험 결과에서는 제안한 방식이 [7] 방식에 비해 화질의 열화 없이 압축 효율의 우수성을 보여준다.

• 전자공학회논문지B
• /
• 제28B권10호
• /
• pp.807-821
• /
• 1991

A mulitpath MIN(Multistage Interconnection Network), CSMP(Chained Shuffle Multi-Path) network, is proposed, having fault-tolerance and dynamic reroutability. The number of stages and the number of links between adjacent stagges are the same as in single path MINs, so the overall hardware complexity is considerably reduced in comparison with other multipath MINs. The CSMP networks feature links between switches belonging to the same state, forming loops of switches. The network can tolerate multiple faults, up to (N/4)*(log$_2$N-1), having occured in any stages including the first and the last ones(N:NO. of input). To analyze reliability, terminal reliability (TR) and mean time to failure( MTTE) age given for the networks, and the TR figures are compared to those of other static and dynamic rerouting multipath MINs. Also the MTTE figures are compared. The performance of the proposed network with respect to its bandwidth (BW) and probability of acceptance(PA) is analyzed and is compared to that of other more complex multipath MINs. The cost efficiency analysis of reliability and performance shows that the network is more cost-effective than other previously proposed fault-tolerant multipath MINs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권5호
• /
• pp.1489-1515
• /
• 2022

The number of interconnected real-world devices such as sensors, actuators, and physical devices has increased with the advancement of technology. Due to this advancement, users face difficulties searching for the location of these devices, and the central issue is the findability of Things. In the WoT environment, keyword-based and geospatial searching approaches are used to locate these devices anywhere and on the web interface. A few static methods of indexing and ranking are discussed in the literature, but they are not suitable for finding devices dynamically. The authors have proposed a mechanism for dynamic and efficient searching of the devices in this paper. Indexing and ranking approaches can improve dynamic searching in different ways. The present paper has focused on indexing for improving dynamic searching and has indexed the Things Description in Solr. This paper presents the Things Description according to the model of W3C JSON-LD along with the open-access APIs. Search efficiency can be analyzed with query response timings, and the accuracy of response timings is critical for search results. Therefore, in this paper, the authors have evaluated their approach by analyzing the search query response timings and the accuracy of their search results. This study utilized different indexing approaches such as key-words-based, spatial, and hybrid. Results indicate that response time and accuracy are better with the hybrid approach than with keyword-based and spatial indexing approaches.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 춘계학술대회논문집
• /
• pp.197-203
• /
• 2002

The estimation of pile bearing capacity is important since the design details are determined from the result. There are numerous ways of determining the pile design load, but only few of them are chosen in the actual design. According to the recent investigation in Korea, the formulas proposed by Meyerhof based on the SPT N values are most frequently chosen in the design stage. In the study, various static and dynamic formulas have been used in predicting the allowable bearing capacity of a pile. Further, the reliability of these formulas has been verified by comparing the perdicted values with the static and dynamic load test measurements. Also in cases, these methods of pile bearing capacity determination do not take the time effect consideration, the actual allowable load as determined from pile load test indicates severe deviation from the design value. The principle results of this study are summarized as follows : A a result of estimate the reliability in criterion of the Davisson method, in was showed that Terzaghi & Peck > Chin > Meyerhof > Modified Meyerhof method was the most reliable method for the prediction of bearing capacity. Comparisons of the various pile-driving formulas showed that Modified Engineering News was the most reliable method. However, a significant error happened between dynamic bearing capacity equation was judged that uncertainty of hammer efficiency, characteristics of variable , time effect etc... was not considered. As a result of considering time effect increased skin friction capacity higher than end bearing capacity. It was found out that it would be possible to increase the skin friction capacity 1.99 times higher than a driving. As a result of considering 7 day's time effect, it was obtained that Engineering News. Modified Engineering News. Hiley, Danish, Gates, CAPWAP(CAse Pile Wave Analysis Program ) analysis for relation, respectively, $Q_{u(Restrike)}$ $Q_{u(EOID)}$ = 0.971 $t_{0.1}$, 0.968 $t_{0.1}$, 1.192 $t_{0.1}$, 0.88 $t_{0.1}$, 0.889 $t_{0.1}$, 0.966 $t_{0.1}$, 0.889 $t_{0.1}$, 0.966 $t_{0.1}$

• 토지주택연구
• /
• 제6권3호
• /
• pp.139-145
• /
• 2015

말뚝 설계효율(설계지지력/재료강도)을 70%(160톤)에서 80%(190톤)로 개선하기 위해 기존 말뚝재하시험 자료 분석과 정밀 동재하시험 및 국내 최초의 양방향 재하시험을 실시하였다. 기존 동재하시험 데이터를 Davisson 방법으로 분석하면 풍화암 지지층(N치 50/15)에서도 설계지지력 190톤을 만족하였다. 그러나, 이를 CAPWAP으로 해석하면, 타격 에너지 부족으로 목표지지력을 만족하지 못한 말뚝이 전체의 40%가 나타났다. 따라서, 동재하시험 결과에서 목표 지지력을 확인하기 위해서는 6톤 이상의 해머에 의하여 충분한 타격력을 가하는 것이 필수적인 것으로 나타났다. 정적인 양방향 재하시험의 Davisson 분석에 의한 허용지지력은 260.0~335tonf(평균 285.3tonf)를 나타내어 목표지지력을 크게 상회하는 것으로 나타났다. 이 시험결과는 동일 말뚝에 대한 정밀 동재하시험의 허용지지력(평균 202.3tonf) 보다 약 40% 정도 크게 나타났는데, 동재하시험에서 충분하지 않은 타격력, 정적 양방향재하시험 시 주변말뚝에 의한 인터록킹에 의한 지지력 증가 등에 의한 차이로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.174-177
• /
• 2001

We have seen the effects of buffer layer in organic light-emitting diodes using poly(N-vinylcarbazole)(PVK). Polymer PVK buffer layer was made using spin casting techniques. Two different types of spin casting have been applied; static coating and dynamic coating. Two device structures were fabricated; one is ITO/TPD/Alq$_3$/Al as a reference, and the other is ITO/PVK/TPD/Alq$_3$/Al to see the effects of buffer layer in organic light-emitting diodes. Current-voltage characteristics and luminous efficiency were measured with a variation of spin-casting methods and rpm speeds. We have obtained an improvement of luminous efficiency by a factor of two and half when the PVK buffer layer is used.